mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-12 07:57:21 +00:00
8e5e1e6a92
This patch adds common dtsi file and config header for all Exynos 4 based boards. Patch additionaly adds board specific (weak) functions for board_early_init_f and board_power_init functions. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
437 lines
9.3 KiB
C
437 lines
9.3 KiB
C
/*
|
|
* (C) Copyright 2013 SAMSUNG Electronics
|
|
* Rajeshwari Shinde <rajeshwari.s@samsung.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <cros_ec.h>
|
|
#include <errno.h>
|
|
#include <fdtdec.h>
|
|
#include <spi.h>
|
|
#include <tmu.h>
|
|
#include <netdev.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/board.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/dwmmc.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/mmc.h>
|
|
#include <asm/arch/pinmux.h>
|
|
#include <asm/arch/power.h>
|
|
#include <power/pmic.h>
|
|
#include <asm/arch/sromc.h>
|
|
#include <power/max77686_pmic.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
struct local_info {
|
|
struct cros_ec_dev *cros_ec_dev; /* Pointer to cros_ec device */
|
|
int cros_ec_err; /* Error for cros_ec, 0 if ok */
|
|
};
|
|
|
|
static struct local_info local;
|
|
|
|
int __exynos_early_init_f(void)
|
|
{
|
|
return 0;
|
|
}
|
|
int exynos_early_init_f(void)
|
|
__attribute__((weak, alias("__exynos_early_init_f")));
|
|
|
|
int __exynos_power_init(void)
|
|
{
|
|
return 0;
|
|
}
|
|
int exynos_power_init(void)
|
|
__attribute__((weak, alias("__exynos_power_init")));
|
|
|
|
#if defined CONFIG_EXYNOS_TMU
|
|
/* Boot Time Thermal Analysis for SoC temperature threshold breach */
|
|
static void boot_temp_check(void)
|
|
{
|
|
int temp;
|
|
|
|
switch (tmu_monitor(&temp)) {
|
|
case TMU_STATUS_NORMAL:
|
|
break;
|
|
case TMU_STATUS_TRIPPED:
|
|
/*
|
|
* Status TRIPPED ans WARNING means corresponding threshold
|
|
* breach
|
|
*/
|
|
puts("EXYNOS_TMU: TRIPPING! Device power going down ...\n");
|
|
set_ps_hold_ctrl();
|
|
hang();
|
|
break;
|
|
case TMU_STATUS_WARNING:
|
|
puts("EXYNOS_TMU: WARNING! Temperature very high\n");
|
|
break;
|
|
case TMU_STATUS_INIT:
|
|
/*
|
|
* TMU_STATUS_INIT means something is wrong with temperature
|
|
* sensing and TMU status was changed back from NORMAL to INIT.
|
|
*/
|
|
puts("EXYNOS_TMU: WARNING! Temperature sensing not done\n");
|
|
break;
|
|
default:
|
|
debug("EXYNOS_TMU: Unknown TMU state\n");
|
|
}
|
|
}
|
|
#endif
|
|
|
|
int board_init(void)
|
|
{
|
|
gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
|
|
#if defined CONFIG_EXYNOS_TMU
|
|
if (tmu_init(gd->fdt_blob) != TMU_STATUS_NORMAL) {
|
|
debug("%s: Failed to init TMU\n", __func__);
|
|
return -1;
|
|
}
|
|
boot_temp_check();
|
|
#endif
|
|
|
|
#ifdef CONFIG_EXYNOS_SPI
|
|
spi_init();
|
|
#endif
|
|
return exynos_init();
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
int i;
|
|
u32 addr;
|
|
|
|
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
|
|
addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
|
|
gd->ram_size += get_ram_size((long *)addr, SDRAM_BANK_SIZE);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
void dram_init_banksize(void)
|
|
{
|
|
int i;
|
|
u32 addr, size;
|
|
|
|
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
|
|
addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
|
|
size = get_ram_size((long *)addr, SDRAM_BANK_SIZE);
|
|
|
|
gd->bd->bi_dram[i].start = addr;
|
|
gd->bd->bi_dram[i].size = size;
|
|
}
|
|
}
|
|
|
|
static int board_uart_init(void)
|
|
{
|
|
int err, uart_id, ret = 0;
|
|
|
|
for (uart_id = PERIPH_ID_UART0; uart_id <= PERIPH_ID_UART3; uart_id++) {
|
|
err = exynos_pinmux_config(uart_id, PINMUX_FLAG_NONE);
|
|
if (err) {
|
|
debug("UART%d not configured\n",
|
|
(uart_id - PERIPH_ID_UART0));
|
|
ret |= err;
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_BOARD_EARLY_INIT_F
|
|
int board_early_init_f(void)
|
|
{
|
|
int err;
|
|
|
|
err = board_uart_init();
|
|
if (err) {
|
|
debug("UART init failed\n");
|
|
return err;
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_I2C_INIT_BOARD
|
|
board_i2c_init(gd->fdt_blob);
|
|
#endif
|
|
|
|
return exynos_early_init_f();
|
|
}
|
|
#endif
|
|
|
|
struct cros_ec_dev *board_get_cros_ec_dev(void)
|
|
{
|
|
return local.cros_ec_dev;
|
|
}
|
|
|
|
#ifdef CONFIG_CROS_EC
|
|
static int board_init_cros_ec_devices(const void *blob)
|
|
{
|
|
local.cros_ec_err = cros_ec_init(blob, &local.cros_ec_dev);
|
|
if (local.cros_ec_err)
|
|
return -1; /* Will report in board_late_init() */
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_POWER)
|
|
#ifdef CONFIG_POWER_MAX77686
|
|
static int pmic_reg_update(struct pmic *p, int reg, uint regval)
|
|
{
|
|
u32 val;
|
|
int ret = 0;
|
|
|
|
ret = pmic_reg_read(p, reg, &val);
|
|
if (ret) {
|
|
debug("%s: PMIC %d register read failed\n", __func__, reg);
|
|
return -1;
|
|
}
|
|
val |= regval;
|
|
ret = pmic_reg_write(p, reg, val);
|
|
if (ret) {
|
|
debug("%s: PMIC %d register write failed\n", __func__, reg);
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int max77686_init(void)
|
|
{
|
|
struct pmic *p;
|
|
|
|
if (pmic_init(I2C_PMIC))
|
|
return -1;
|
|
|
|
p = pmic_get("MAX77686_PMIC");
|
|
if (!p)
|
|
return -ENODEV;
|
|
|
|
if (pmic_probe(p))
|
|
return -1;
|
|
|
|
if (pmic_reg_update(p, MAX77686_REG_PMIC_32KHZ, MAX77686_32KHCP_EN))
|
|
return -1;
|
|
|
|
if (pmic_reg_update(p, MAX77686_REG_PMIC_BBAT,
|
|
MAX77686_BBCHOSTEN | MAX77686_BBCVS_3_5V))
|
|
return -1;
|
|
|
|
/* VDD_MIF */
|
|
if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK1OUT,
|
|
MAX77686_BUCK1OUT_1V)) {
|
|
debug("%s: PMIC %d register write failed\n", __func__,
|
|
MAX77686_REG_PMIC_BUCK1OUT);
|
|
return -1;
|
|
}
|
|
|
|
if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK1CRTL,
|
|
MAX77686_BUCK1CTRL_EN))
|
|
return -1;
|
|
|
|
/* VDD_ARM */
|
|
if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK2DVS1,
|
|
MAX77686_BUCK2DVS1_1_3V)) {
|
|
debug("%s: PMIC %d register write failed\n", __func__,
|
|
MAX77686_REG_PMIC_BUCK2DVS1);
|
|
return -1;
|
|
}
|
|
|
|
if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK2CTRL1,
|
|
MAX77686_BUCK2CTRL_ON))
|
|
return -1;
|
|
|
|
/* VDD_INT */
|
|
if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK3DVS1,
|
|
MAX77686_BUCK3DVS1_1_0125V)) {
|
|
debug("%s: PMIC %d register write failed\n", __func__,
|
|
MAX77686_REG_PMIC_BUCK3DVS1);
|
|
return -1;
|
|
}
|
|
|
|
if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK3CTRL,
|
|
MAX77686_BUCK3CTRL_ON))
|
|
return -1;
|
|
|
|
/* VDD_G3D */
|
|
if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK4DVS1,
|
|
MAX77686_BUCK4DVS1_1_2V)) {
|
|
debug("%s: PMIC %d register write failed\n", __func__,
|
|
MAX77686_REG_PMIC_BUCK4DVS1);
|
|
return -1;
|
|
}
|
|
|
|
if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK4CTRL1,
|
|
MAX77686_BUCK3CTRL_ON))
|
|
return -1;
|
|
|
|
/* VDD_LDO2 */
|
|
if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO2CTRL1,
|
|
MAX77686_LD02CTRL1_1_5V | EN_LDO))
|
|
return -1;
|
|
|
|
/* VDD_LDO3 */
|
|
if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO3CTRL1,
|
|
MAX77686_LD03CTRL1_1_8V | EN_LDO))
|
|
return -1;
|
|
|
|
/* VDD_LDO5 */
|
|
if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO5CTRL1,
|
|
MAX77686_LD05CTRL1_1_8V | EN_LDO))
|
|
return -1;
|
|
|
|
/* VDD_LDO10 */
|
|
if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO10CTRL1,
|
|
MAX77686_LD10CTRL1_1_8V | EN_LDO))
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int power_init_board(void)
|
|
{
|
|
int ret = 0;
|
|
|
|
set_ps_hold_ctrl();
|
|
|
|
#ifdef CONFIG_POWER_MAX77686
|
|
ret = max77686_init();
|
|
#endif
|
|
|
|
return exynos_power_init();
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_OF_CONTROL
|
|
static int decode_sromc(const void *blob, struct fdt_sromc *config)
|
|
{
|
|
int err;
|
|
int node;
|
|
|
|
node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS5_SROMC);
|
|
if (node < 0) {
|
|
debug("Could not find SROMC node\n");
|
|
return node;
|
|
}
|
|
|
|
config->bank = fdtdec_get_int(blob, node, "bank", 0);
|
|
config->width = fdtdec_get_int(blob, node, "width", 2);
|
|
|
|
err = fdtdec_get_int_array(blob, node, "srom-timing", config->timing,
|
|
FDT_SROM_TIMING_COUNT);
|
|
if (err < 0) {
|
|
debug("Could not decode SROMC configuration Error: %s\n",
|
|
fdt_strerror(err));
|
|
return -FDT_ERR_NOTFOUND;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
#ifdef CONFIG_SMC911X
|
|
u32 smc_bw_conf, smc_bc_conf;
|
|
struct fdt_sromc config;
|
|
fdt_addr_t base_addr;
|
|
int node;
|
|
|
|
node = decode_sromc(gd->fdt_blob, &config);
|
|
if (node < 0) {
|
|
debug("%s: Could not find sromc configuration\n", __func__);
|
|
return 0;
|
|
}
|
|
node = fdtdec_next_compatible(gd->fdt_blob, node, COMPAT_SMSC_LAN9215);
|
|
if (node < 0) {
|
|
debug("%s: Could not find lan9215 configuration\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
/* We now have a node, so any problems from now on are errors */
|
|
base_addr = fdtdec_get_addr(gd->fdt_blob, node, "reg");
|
|
if (base_addr == FDT_ADDR_T_NONE) {
|
|
debug("%s: Could not find lan9215 address\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
/* Ethernet needs data bus width of 16 bits */
|
|
if (config.width != 2) {
|
|
debug("%s: Unsupported bus width %d\n", __func__,
|
|
config.width);
|
|
return -1;
|
|
}
|
|
smc_bw_conf = SROMC_DATA16_WIDTH(config.bank)
|
|
| SROMC_BYTE_ENABLE(config.bank);
|
|
|
|
smc_bc_conf = SROMC_BC_TACS(config.timing[FDT_SROM_TACS]) |
|
|
SROMC_BC_TCOS(config.timing[FDT_SROM_TCOS]) |
|
|
SROMC_BC_TACC(config.timing[FDT_SROM_TACC]) |
|
|
SROMC_BC_TCOH(config.timing[FDT_SROM_TCOH]) |
|
|
SROMC_BC_TAH(config.timing[FDT_SROM_TAH]) |
|
|
SROMC_BC_TACP(config.timing[FDT_SROM_TACP]) |
|
|
SROMC_BC_PMC(config.timing[FDT_SROM_PMC]);
|
|
|
|
/* Select and configure the SROMC bank */
|
|
exynos_pinmux_config(PERIPH_ID_SROMC, config.bank);
|
|
s5p_config_sromc(config.bank, smc_bw_conf, smc_bc_conf);
|
|
return smc911x_initialize(0, base_addr);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_GENERIC_MMC
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
int ret;
|
|
|
|
/* dwmmc initializattion for available channels */
|
|
ret = exynos_dwmmc_init(gd->fdt_blob);
|
|
if (ret)
|
|
debug("dwmmc init failed\n");
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_DISPLAY_BOARDINFO
|
|
int checkboard(void)
|
|
{
|
|
const char *board_name;
|
|
|
|
board_name = fdt_getprop(gd->fdt_blob, 0, "model", NULL);
|
|
printf("Board: %s\n", board_name ? board_name : "unknown");
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
#endif /* CONFIG_OF_CONTROL */
|
|
|
|
#ifdef CONFIG_BOARD_LATE_INIT
|
|
int board_late_init(void)
|
|
{
|
|
stdio_print_current_devices();
|
|
|
|
if (local.cros_ec_err) {
|
|
/* Force console on */
|
|
gd->flags &= ~GD_FLG_SILENT;
|
|
|
|
printf("cros-ec communications failure %d\n",
|
|
local.cros_ec_err);
|
|
puts("\nPlease reset with Power+Refresh\n\n");
|
|
panic("Cannot init cros-ec device");
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int arch_early_init_r(void)
|
|
{
|
|
#ifdef CONFIG_CROS_EC
|
|
if (board_init_cros_ec_devices(gd->fdt_blob)) {
|
|
printf("%s: Failed to init EC\n", __func__);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|