u-boot/drivers/usb/host/ohci-at91.c
Bo Shen dcd2f1a0d2 arm: atmel: get rid of too many ifdeffery
Get rid of too many ifdeffery in usb ohci driver

Add following two configuration for USB clock selecting
- CONFIG_USB_ATMEL_CLK_SEL_PLLB: using PLLB as usb ohci input clock
- CONFIG_USB_ATMEL_CLK_SEL_UPLL: using UPLL as usb ohci input clock

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2013-11-04 20:32:37 +01:00

96 lines
2.2 KiB
C

/*
* (C) Copyright 2006
* DENX Software Engineering <mk@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
#include <asm/io.h>
#include <asm/arch/hardware.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/clk.h>
int usb_cpu_init(void)
{
at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
#ifdef CONFIG_USB_ATMEL_CLK_SEL_PLLB
/* Enable PLLB */
writel(get_pllb_init(), &pmc->pllbr);
while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB)
;
#ifdef CONFIG_AT91SAM9N12
writel(AT91_PMC_USBS_USB_PLLB | AT91_PMC_USB_DIV_2, &pmc->usb);
#endif
#elif defined(CONFIG_USB_ATMEL_CLK_SEL_UPLL)
/* Enable UPLL */
writel(readl(&pmc->uckr) | AT91_PMC_UPLLEN | AT91_PMC_BIASEN,
&pmc->uckr);
while ((readl(&pmc->sr) & AT91_PMC_LOCKU) != AT91_PMC_LOCKU)
;
/* Select PLLA as input clock of OHCI */
writel(AT91_PMC_USBS_USB_UPLL | AT91_PMC_USBDIV_10, &pmc->usb);
#endif
/* Enable USB host clock. */
#ifdef CONFIG_SAMA5D3
writel(1 << (ATMEL_ID_UHP - 32), &pmc->pcer1);
#else
writel(1 << ATMEL_ID_UHP, &pmc->pcer);
#endif
#if defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10)
writel(ATMEL_PMC_UHP | AT91_PMC_HCK0, &pmc->scer);
#else
writel(ATMEL_PMC_UHP, &pmc->scer);
#endif
return 0;
}
int usb_cpu_stop(void)
{
at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC;
/* Disable USB host clock. */
#ifdef CONFIG_SAMA5D3
writel(1 << (ATMEL_ID_UHP - 32), &pmc->pcdr1);
#else
writel(1 << ATMEL_ID_UHP, &pmc->pcdr);
#endif
#if defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10)
writel(ATMEL_PMC_UHP | AT91_PMC_HCK0, &pmc->scdr);
#else
writel(ATMEL_PMC_UHP, &pmc->scdr);
#endif
#ifdef CONFIG_USB_ATMEL_CLK_SEL_PLLB
#ifdef CONFIG_AT91SAM9N12
writel(0, &pmc->usb);
#endif
/* Disable PLLB */
writel(0, &pmc->pllbr);
while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0)
;
#elif defined(CONFIG_USB_ATMEL_CLK_SEL_UPLL)
/* Disable UPLL */
writel(readl(&pmc->uckr) & (~AT91_PMC_UPLLEN), &pmc->uckr);
while ((readl(&pmc->sr) & AT91_PMC_LOCKU) == AT91_PMC_LOCKU)
;
#endif
return 0;
}
int usb_cpu_init_fail(void)
{
return usb_cpu_stop();
}
#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */