mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-02 17:41:08 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
143 lines
3.7 KiB
C
143 lines
3.7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2013
|
|
* Andre Przywara, Linaro <andre.przywara@linaro.org>
|
|
*
|
|
* Routines to transition ARMv7 processors from secure into non-secure state
|
|
* and from non-secure SVC into HYP mode
|
|
* needed to enable ARMv7 virtualization for current hypervisors
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/armv7.h>
|
|
#include <asm/gic.h>
|
|
#include <asm/io.h>
|
|
#include <asm/secure.h>
|
|
|
|
static unsigned int read_id_pfr1(void)
|
|
{
|
|
unsigned int reg;
|
|
|
|
asm("mrc p15, 0, %0, c0, c1, 1\n" : "=r"(reg));
|
|
return reg;
|
|
}
|
|
|
|
static unsigned long get_gicd_base_address(void)
|
|
{
|
|
#ifdef CONFIG_ARM_GIC_BASE_ADDRESS
|
|
return CONFIG_ARM_GIC_BASE_ADDRESS + GIC_DIST_OFFSET;
|
|
#else
|
|
unsigned periphbase;
|
|
|
|
/* get the GIC base address from the CBAR register */
|
|
asm("mrc p15, 4, %0, c15, c0, 0\n" : "=r" (periphbase));
|
|
|
|
/* the PERIPHBASE can be mapped above 4 GB (lower 8 bits used to
|
|
* encode this). Bail out here since we cannot access this without
|
|
* enabling paging.
|
|
*/
|
|
if ((periphbase & 0xff) != 0) {
|
|
printf("nonsec: PERIPHBASE is above 4 GB, no access.\n");
|
|
return -1;
|
|
}
|
|
|
|
return (periphbase & CBAR_MASK) + GIC_DIST_OFFSET;
|
|
#endif
|
|
}
|
|
|
|
/* Define a specific version of this function to enable any available
|
|
* hardware protections for the reserved region */
|
|
void __weak protect_secure_section(void) {}
|
|
|
|
static void relocate_secure_section(void)
|
|
{
|
|
#ifdef CONFIG_ARMV7_SECURE_BASE
|
|
size_t sz = __secure_end - __secure_start;
|
|
unsigned long szflush = ALIGN(sz + 1, CONFIG_SYS_CACHELINE_SIZE);
|
|
|
|
memcpy((void *)CONFIG_ARMV7_SECURE_BASE, __secure_start, sz);
|
|
|
|
flush_dcache_range(CONFIG_ARMV7_SECURE_BASE,
|
|
CONFIG_ARMV7_SECURE_BASE + szflush);
|
|
protect_secure_section();
|
|
invalidate_icache_all();
|
|
#endif
|
|
}
|
|
|
|
static void kick_secondary_cpus_gic(unsigned long gicdaddr)
|
|
{
|
|
/* kick all CPUs (except this one) by writing to GICD_SGIR */
|
|
writel(1U << 24, gicdaddr + GICD_SGIR);
|
|
}
|
|
|
|
void __weak smp_kick_all_cpus(void)
|
|
{
|
|
unsigned long gic_dist_addr;
|
|
|
|
gic_dist_addr = get_gicd_base_address();
|
|
if (gic_dist_addr == -1)
|
|
return;
|
|
|
|
kick_secondary_cpus_gic(gic_dist_addr);
|
|
}
|
|
|
|
__weak void psci_board_init(void)
|
|
{
|
|
}
|
|
|
|
int armv7_init_nonsec(void)
|
|
{
|
|
unsigned int reg;
|
|
unsigned itlinesnr, i;
|
|
unsigned long gic_dist_addr;
|
|
|
|
/* check whether the CPU supports the security extensions */
|
|
reg = read_id_pfr1();
|
|
if ((reg & 0xF0) == 0) {
|
|
printf("nonsec: Security extensions not implemented.\n");
|
|
return -1;
|
|
}
|
|
|
|
/* the SCR register will be set directly in the monitor mode handler,
|
|
* according to the spec one should not tinker with it in secure state
|
|
* in SVC mode. Do not try to read it once in non-secure state,
|
|
* any access to it will trap.
|
|
*/
|
|
|
|
gic_dist_addr = get_gicd_base_address();
|
|
if (gic_dist_addr == -1)
|
|
return -1;
|
|
|
|
/* enable the GIC distributor */
|
|
writel(readl(gic_dist_addr + GICD_CTLR) | 0x03,
|
|
gic_dist_addr + GICD_CTLR);
|
|
|
|
/* TYPER[4:0] contains an encoded number of available interrupts */
|
|
itlinesnr = readl(gic_dist_addr + GICD_TYPER) & 0x1f;
|
|
|
|
/* set all bits in the GIC group registers to one to allow access
|
|
* from non-secure state. The first 32 interrupts are private per
|
|
* CPU and will be set later when enabling the GIC for each core
|
|
*/
|
|
for (i = 1; i <= itlinesnr; i++)
|
|
writel((unsigned)-1, gic_dist_addr + GICD_IGROUPRn + 4 * i);
|
|
|
|
psci_board_init();
|
|
|
|
/*
|
|
* Relocate secure section before any cpu runs in secure ram.
|
|
* smp_kick_all_cpus may enable other cores and runs into secure
|
|
* ram, so need to relocate secure section before enabling other
|
|
* cores.
|
|
*/
|
|
relocate_secure_section();
|
|
|
|
#ifndef CONFIG_ARMV7_PSCI
|
|
smp_set_core_boot_addr((unsigned long)secure_ram_addr(_smp_pen), -1);
|
|
smp_kick_all_cpus();
|
|
#endif
|
|
|
|
/* call the non-sec switching code on this CPU also */
|
|
secure_ram_addr(_nonsec_init)();
|
|
return 0;
|
|
}
|