u-boot/configs/am57xx_hs_evm_defconfig
Simon Glass 2be296538e Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig
This converts the following to Kconfig:
   CONFIG_ENV_IS_IN_MMC
   CONFIG_ENV_IS_IN_NAND
   CONFIG_ENV_IS_IN_UBI
   CONFIG_ENV_IS_NOWHERE

In fact this already exists for sunxi as a 'choice' config. However not
all the choices are available in Kconfig yet so we cannot use that. It
would lead to more than one option being set.

In addition, one purpose of this series is to allow the environment to be
stored in more than one place. So the existing choice is converted to a
normal config allowing each option to be set independently.

There are not many opportunities for Kconfig updates to reduce the size of
this patch. This was tested with

   ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

And then manual updates.  This is because for CHAIN_OF_TRUST boards they
can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
now.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-25 21:08:01 -04:00

79 lines
2 KiB
Text

CONFIG_ARM=y
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_TI_COMMON_CMD_OPTIONS=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_OMAP54XX=y
CONFIG_TI_SECURE_DEVICE=y
CONFIG_TI_SECURE_EMIF_REGION_START=0xbdb00000
CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE=0x02000000
CONFIG_TI_SECURE_EMIF_PROTECTED_REGION_SIZE=0x01c00000
CONFIG_TARGET_AM57XX_EVM=y
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_ARMV7_LPAE=y
CONFIG_DEFAULT_DEVICE_TREE="am57xx-beagle-x15"
CONFIG_FIT_IMAGE_POST_PROCESS=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_FASTBOOT=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_ANDROID_BOOT_IMAGE=y
CONFIG_FASTBOOT_BUF_ADDR=0x82000000
CONFIG_FASTBOOT_BUF_SIZE=0x2f000000
CONFIG_FASTBOOT_USB_DEV=1
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=1
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_ISO_PARTITION=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIST="am57xx-beagle-x15 am57xx-beagle-x15-revb1 am572x-idk am571x-idk"
CONFIG_DM=y
CONFIG_SPL_DM=y
# CONFIG_BLK is not set
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
CONFIG_DM_GPIO=y
CONFIG_DM_I2C=y
CONFIG_DM_MMC=y
CONFIG_MMC_OMAP_HS=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_DM_PMIC=y
CONFIG_PMIC_PALMAS=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_PALMAS=y
CONFIG_DM_SERIAL=y
CONFIG_SYS_NS16550=y
CONFIG_DM_SPI=y
CONFIG_TI_QSPI=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GADGET=y
CONFIG_USB_DWC3_OMAP=y
CONFIG_USB_DWC3_PHY_OMAP=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
CONFIG_G_DNL_VENDOR_NUM=0x0451
CONFIG_G_DNL_PRODUCT_NUM=0xd022