u-boot/include/power/tps65090.h
Simon Glass 151b223b9c dm: power: Add a new driver for the TPS65090 PMIC
The existing TPS65090 driver does not support driver model. Add a new one
that does. This can be used as a base for a regulator driver also. It uses
the standard device tree binding.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2015-08-05 21:06:12 -06:00

56 lines
1.2 KiB
C

/*
* Copyright (c) 2015 Google, Inc
* Written by Simon Glass <sjg@chromium.org>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __TPS65090_PMIC_H_
#define __TPS65090_PMIC_H_
/* I2C device address for TPS65090 PMU */
#define TPS65090_I2C_ADDR 0x48
/* TPS65090 register addresses */
enum {
REG_IRQ1 = 0,
REG_CG_CTRL0 = 4,
REG_CG_STATUS1 = 0xa,
REG_FET_BASE = 0xe, /* Not a real register, FETs count from here */
REG_FET1_CTRL,
REG_FET2_CTRL,
REG_FET3_CTRL,
REG_FET4_CTRL,
REG_FET5_CTRL,
REG_FET6_CTRL,
REG_FET7_CTRL,
TPS65090_NUM_REGS,
};
enum {
IRQ1_VBATG = 1 << 3,
CG_CTRL0_ENC_MASK = 0x01,
MAX_FET_NUM = 7,
MAX_CTRL_READ_TRIES = 5,
/* TPS65090 FET_CTRL register values */
FET_CTRL_TOFET = 1 << 7, /* Timeout, startup, overload */
FET_CTRL_PGFET = 1 << 4, /* Power good for FET status */
FET_CTRL_WAIT = 3 << 2, /* Overcurrent timeout max */
FET_CTRL_ADENFET = 1 << 1, /* Enable output auto discharge */
FET_CTRL_ENFET = 1 << 0, /* Enable FET */
};
enum {
/* Status register fields */
TPS65090_ST1_OTC = 1 << 0,
TPS65090_ST1_OCC = 1 << 1,
TPS65090_ST1_STATE_SHIFT = 4,
TPS65090_ST1_STATE_MASK = 0xf << TPS65090_ST1_STATE_SHIFT,
};
/* Drivers name */
#define TPS65090_FET_DRIVER "tps65090_fet"
#endif /* __TPS65090_PMIC_H_ */