u-boot/arch/arm/cpu/arm926ejs/lpc32xx/clk.c
Albert ARIBAUD \(3ADEV\) 412ae53aad lpc32xx: add support for board work_92105
Work_92105 from Work Microwave is an LPC3250-
based board with the following features:
- 64MB or 128MB SDR DRAM
- 1 GB SLC NAND, managed through MLC controller.
- Ethernet
- Ethernet + PHY SMSC8710
- I2C:
  - EEPROM (24M01-compatible)
  - RTC (DS1374-compatible)
  - Temperature sensor (DS620)
  - DACs (2 x MAX518)
- SPI (through SSP interface)
  - Port expander MAX6957
- LCD display (HD44780-compatible), controlled
  through the port expander and DACs

This board has SPL support, and uses the LPC32XX boot
image format.

Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
2015-04-10 14:23:39 +02:00

138 lines
2.7 KiB
C

/*
* Copyright (C) 2011 by Vladimir Zapolskiy <vz@mleia.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <div64.h>
#include <asm/arch/cpu.h>
#include <asm/arch/clk.h>
#include <asm/io.h>
static struct clk_pm_regs *clk = (struct clk_pm_regs *)CLK_PM_BASE;
unsigned int get_sys_clk_rate(void)
{
if (readl(&clk->sysclk_ctrl) & CLK_SYSCLK_PLL397)
return RTC_CLK_FREQUENCY * 397;
else
return OSC_CLK_FREQUENCY;
}
unsigned int get_hclk_pll_rate(void)
{
unsigned long long fin, fref, fcco, fout;
u32 val, m_div, n_div, p_div;
/*
* Valid frequency ranges:
* 1 * 10^6 <= Fin <= 20 * 10^6
* 1 * 10^6 <= Fref <= 27 * 10^6
* 156 * 10^6 <= Fcco <= 320 * 10^6
*/
fref = fin = get_sys_clk_rate();
if (fin > 20000000ULL || fin < 1000000ULL)
return 0;
val = readl(&clk->hclkpll_ctrl);
m_div = ((val & CLK_HCLK_PLL_FEEDBACK_DIV_MASK) >> 1) + 1;
n_div = ((val & CLK_HCLK_PLL_PREDIV_MASK) >> 9) + 1;
if (val & CLK_HCLK_PLL_DIRECT)
p_div = 0;
else
p_div = ((val & CLK_HCLK_PLL_POSTDIV_MASK) >> 11) + 1;
p_div = 1 << p_div;
if (val & CLK_HCLK_PLL_BYPASS) {
do_div(fin, p_div);
return fin;
}
do_div(fref, n_div);
if (fref > 27000000ULL || fref < 1000000ULL)
return 0;
fout = fref * m_div;
if (val & CLK_HCLK_PLL_FEEDBACK) {
fcco = fout;
do_div(fout, p_div);
} else
fcco = fout * p_div;
if (fcco > 320000000ULL || fcco < 156000000ULL)
return 0;
return fout;
}
unsigned int get_hclk_clk_div(void)
{
u32 val;
val = readl(&clk->hclkdiv_ctrl) & CLK_HCLK_ARM_PLL_DIV_MASK;
return 1 << val;
}
unsigned int get_hclk_clk_rate(void)
{
return get_hclk_pll_rate() / get_hclk_clk_div();
}
unsigned int get_periph_clk_div(void)
{
u32 val;
val = readl(&clk->hclkdiv_ctrl) & CLK_HCLK_PERIPH_DIV_MASK;
return (val >> 2) + 1;
}
unsigned int get_periph_clk_rate(void)
{
if (!(readl(&clk->pwr_ctrl) & CLK_PWR_NORMAL_RUN))
return get_sys_clk_rate();
return get_hclk_pll_rate() / get_periph_clk_div();
}
unsigned int get_sdram_clk_rate(void)
{
unsigned int src_clk;
if (!(readl(&clk->pwr_ctrl) & CLK_PWR_NORMAL_RUN))
return get_sys_clk_rate();
src_clk = get_hclk_pll_rate();
if (readl(&clk->sdramclk_ctrl) & CLK_SDRAM_DDR_SEL) {
/* using DDR */
switch (readl(&clk->hclkdiv_ctrl) & CLK_HCLK_DDRAM_MASK) {
case CLK_HCLK_DDRAM_HALF:
return src_clk/2;
case CLK_HCLK_DDRAM_NOMINAL:
return src_clk;
default:
return 0;
}
} else {
/* using SDR */
switch (readl(&clk->hclkdiv_ctrl) & CLK_HCLK_ARM_PLL_DIV_MASK) {
case CLK_HCLK_ARM_PLL_DIV_4:
return src_clk/4;
case CLK_HCLK_ARM_PLL_DIV_2:
return src_clk/2;
case CLK_HCLK_ARM_PLL_DIV_1:
return src_clk;
default:
return 0;
}
}
}
int get_serial_clock(void)
{
return get_periph_clk_rate();
}