u-boot/configs/uniphier_v8_defconfig
Tom Rini 8d8ee47e03 env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol
Today in initr_reloc_global_data() we use some non-obvious tests to
determine if we need to relocate the env_addr within gd or not.  In
order to facilitate migration of other symbols to Kconfig we need to
introduce a new symbol for this particular use case.

Cc: Wolfgang Denk <wd@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-20 12:24:50 -05:00

64 lines
1.6 KiB
Text

CONFIG_ARM=y
CONFIG_POSITION_INDEPENDENT=y
CONFIG_INIT_SP_RELATIVE=y
CONFIG_ARM_SMCCC=y
CONFIG_ARCH_UNIPHIER=y
CONFIG_SYS_TEXT_BASE=0x00000000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_NR_DRAM_BANKS=3
CONFIG_ARCH_UNIPHIER_V8_MULTI=y
CONFIG_MICRO_SUPPORT_CARD=y
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_BOOTCOMMAND="run ${bootdev}script; run ${bootdev}boot"
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="env exist ${bootdev}preboot && run ${bootdev}preboot"
CONFIG_LOGLEVEL=6
CONFIG_CMD_CONFIG=y
CONFIG_CMD_IMLS=y
# CONFIG_CMD_XIMG is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
# CONFIG_CMD_MISC is not set
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=uniphier-nand.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=uniphier-nand.0:1m(firmware),-(UBI)"
CONFIG_CMD_UBI=y
CONFIG_DEFAULT_DEVICE_TREE="uniphier-ld20-ref"
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_GPIO_UNIPHIER=y
CONFIG_MISC=y
CONFIG_I2C_EEPROM=y
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
CONFIG_SUPPORT_EMMC_RPMB=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_HS200_SUPPORT=y
CONFIG_MMC_UNIPHIER=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SDMA=y
CONFIG_MMC_SDHCI_CADENCE=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_NAND=y
CONFIG_NAND_DENALI_DT=y
CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
CONFIG_DM_ETH=y
CONFIG_SNI_AVE=y
CONFIG_PINCONF=y
CONFIG_SYSRESET=y
CONFIG_SYSRESET_PSCI=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_UNIPHIER=y
CONFIG_PANIC_HANG=y
CONFIG_FDT_FIXUP_PARTITIONS=y