mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 07:34:31 +00:00
baf3570503
While the 1.0 and 1.2 spin of the bf533-stamp boards can handle the higher SCLK speeds just fine, the 1.1 spin cannot due to the bugs introduced with the shortened SDRAM traces. So lower the SCLK speed down to a value that all three can handle. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
259 lines
6.4 KiB
C
259 lines
6.4 KiB
C
/*
|
|
* U-boot - Configuration file for BF533 STAMP board
|
|
*/
|
|
|
|
#ifndef __CONFIG_BF533_STAMP_H__
|
|
#define __CONFIG_BF533_STAMP_H__
|
|
|
|
#include <asm/config-pre.h>
|
|
|
|
|
|
/*
|
|
* Processor Settings
|
|
*/
|
|
#define CONFIG_BFIN_CPU bf533-0.3
|
|
#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS
|
|
|
|
|
|
/*
|
|
* Clock Settings
|
|
* CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
|
|
* SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
|
|
*/
|
|
/* CONFIG_CLKIN_HZ is any value in Hz */
|
|
#define CONFIG_CLKIN_HZ 11059200
|
|
/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
|
|
/* 1 = CLKIN / 2 */
|
|
#define CONFIG_CLKIN_HALF 0
|
|
/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
|
|
/* 1 = bypass PLL */
|
|
#define CONFIG_PLL_BYPASS 0
|
|
/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
|
|
/* Values can range from 0-63 (where 0 means 64) */
|
|
#define CONFIG_VCO_MULT 45
|
|
/* CCLK_DIV controls the core clock divider */
|
|
/* Values can be 1, 2, 4, or 8 ONLY */
|
|
#define CONFIG_CCLK_DIV 1
|
|
/* SCLK_DIV controls the system clock divider */
|
|
/* Values can range from 1-15 */
|
|
#define CONFIG_SCLK_DIV 6 /* note: 1.2 boards can go faster */
|
|
|
|
|
|
/*
|
|
* Memory Settings
|
|
*/
|
|
#define CONFIG_MEM_ADD_WDTH 11
|
|
#define CONFIG_MEM_SIZE 128
|
|
|
|
#define CONFIG_EBIU_SDRRC_VAL 0x268
|
|
#define CONFIG_EBIU_SDGCTL_VAL 0x911109
|
|
|
|
#define CONFIG_EBIU_AMGCTL_VAL 0xFF
|
|
#define CONFIG_EBIU_AMBCTL0_VAL 0xBBC3BBC3
|
|
#define CONFIG_EBIU_AMBCTL1_VAL 0x99B39983
|
|
|
|
#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
|
|
#define CONFIG_SYS_MALLOC_LEN (384 * 1024)
|
|
|
|
|
|
/*
|
|
* Network Settings
|
|
*/
|
|
#define ADI_CMDS_NETWORK 1
|
|
#define CONFIG_DRIVER_SMC91111 1
|
|
#define CONFIG_SMC91111_BASE 0x20300300
|
|
#define SMC91111_EEPROM_INIT() \
|
|
do { \
|
|
*pFIO_DIR |= PF1; \
|
|
*pFIO_FLAG_S = PF1; \
|
|
SSYNC(); \
|
|
} while (0)
|
|
#define CONFIG_HOSTNAME bf533-stamp
|
|
/* Uncomment next line to use fixed MAC address */
|
|
/* #define CONFIG_ETHADDR 02:80:ad:20:31:b8 */
|
|
|
|
|
|
/*
|
|
* Flash Settings
|
|
*/
|
|
#define CONFIG_FLASH_CFI_DRIVER
|
|
#define CONFIG_SYS_FLASH_BASE 0x20000000
|
|
#define CONFIG_SYS_FLASH_CFI
|
|
#define CONFIG_SYS_FLASH_CFI_AMD_RESET
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 67
|
|
|
|
|
|
/*
|
|
* SPI Settings
|
|
*/
|
|
#define CONFIG_BFIN_SPI
|
|
#define CONFIG_ENV_SPI_MAX_HZ 30000000
|
|
#define CONFIG_SF_DEFAULT_SPEED 30000000
|
|
#define CONFIG_SPI_FLASH
|
|
#define CONFIG_SPI_FLASH_ATMEL
|
|
#define CONFIG_SPI_FLASH_SPANSION
|
|
#define CONFIG_SPI_FLASH_STMICRO
|
|
#define CONFIG_SPI_FLASH_WINBOND
|
|
|
|
|
|
/*
|
|
* Env Storage Settings
|
|
*/
|
|
#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
|
|
#define CONFIG_ENV_IS_IN_SPI_FLASH
|
|
#define CONFIG_ENV_OFFSET 0x10000
|
|
#define CONFIG_ENV_SIZE 0x2000
|
|
#define CONFIG_ENV_SECT_SIZE 0x10000
|
|
#else
|
|
#define CONFIG_ENV_IS_IN_FLASH
|
|
#define CONFIG_ENV_OFFSET 0x4000
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
|
|
#define CONFIG_ENV_SIZE 0x2000
|
|
#define CONFIG_ENV_SECT_SIZE 0x2000
|
|
#endif
|
|
#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
|
|
#define ENV_IS_EMBEDDED
|
|
#else
|
|
#define ENV_IS_EMBEDDED_CUSTOM
|
|
#endif
|
|
#ifdef ENV_IS_EMBEDDED
|
|
/* WARNING - the following is hand-optimized to fit within
|
|
* the sector before the environment sector. If it throws
|
|
* an error during compilation remove an object here to get
|
|
* it linked after the configuration sector.
|
|
*/
|
|
# define LDS_BOARD_TEXT \
|
|
cpu/blackfin/traps.o (.text .text.*); \
|
|
cpu/blackfin/interrupt.o (.text .text.*); \
|
|
cpu/blackfin/serial.o (.text .text.*); \
|
|
common/dlmalloc.o (.text .text.*); \
|
|
lib_generic/crc32.o (.text .text.*); \
|
|
. = DEFINED(env_offset) ? env_offset : .; \
|
|
common/env_embedded.o (.text .text.*);
|
|
#endif
|
|
|
|
|
|
/*
|
|
* I2C Settings
|
|
* By default PF2 is used as SDA and PF3 as SCL on the Stamp board
|
|
*/
|
|
#define CONFIG_SOFT_I2C
|
|
#ifdef CONFIG_SOFT_I2C
|
|
#define PF_SCL PF3
|
|
#define PF_SDA PF2
|
|
#define I2C_INIT \
|
|
do { \
|
|
*pFIO_DIR |= PF_SCL; \
|
|
SSYNC(); \
|
|
} while (0)
|
|
#define I2C_ACTIVE \
|
|
do { \
|
|
*pFIO_DIR |= PF_SDA; \
|
|
*pFIO_INEN &= ~PF_SDA; \
|
|
SSYNC(); \
|
|
} while (0)
|
|
#define I2C_TRISTATE \
|
|
do { \
|
|
*pFIO_DIR &= ~PF_SDA; \
|
|
*pFIO_INEN |= PF_SDA; \
|
|
SSYNC(); \
|
|
} while (0)
|
|
#define I2C_READ ((*pFIO_FLAG_D & PF_SDA) != 0)
|
|
#define I2C_SDA(bit) \
|
|
do { \
|
|
if (bit) \
|
|
*pFIO_FLAG_S = PF_SDA; \
|
|
else \
|
|
*pFIO_FLAG_C = PF_SDA; \
|
|
SSYNC(); \
|
|
} while (0)
|
|
#define I2C_SCL(bit) \
|
|
do { \
|
|
if (bit) \
|
|
*pFIO_FLAG_S = PF_SCL; \
|
|
else \
|
|
*pFIO_FLAG_C = PF_SCL; \
|
|
SSYNC(); \
|
|
} while (0)
|
|
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
|
|
|
|
#define CONFIG_SYS_I2C_SPEED 50000
|
|
#define CONFIG_SYS_I2C_SLAVE 0
|
|
#endif
|
|
|
|
|
|
/*
|
|
* Compact Flash / IDE / ATA Settings
|
|
*/
|
|
|
|
/* Enabled below option for CF support */
|
|
/* #define CONFIG_STAMP_CF */
|
|
#if defined(CONFIG_STAMP_CF)
|
|
#define CONFIG_MISC_INIT_R
|
|
#define CONFIG_DOS_PARTITION 1
|
|
#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
|
|
#undef CONFIG_IDE_LED /* no led for ide supported */
|
|
#undef CONFIG_IDE_RESET /* no reset for ide supported */
|
|
|
|
#define CONFIG_SYS_IDE_MAXBUS 1
|
|
#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS * 1)
|
|
|
|
#define CONFIG_SYS_ATA_BASE_ADDR 0x20200000
|
|
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
|
|
|
|
#define CONFIG_SYS_ATA_DATA_OFFSET 0x0020 /* data I/O */
|
|
#define CONFIG_SYS_ATA_REG_OFFSET 0x0020 /* normal register accesses */
|
|
#define CONFIG_SYS_ATA_ALT_OFFSET 0x0007 /* alternate registers */
|
|
|
|
#define CONFIG_SYS_ATA_STRIDE 2
|
|
|
|
#undef CONFIG_EBIU_AMBCTL1_VAL
|
|
#define CONFIG_EBIU_AMBCTL1_VAL 0x99B3ffc2
|
|
#endif
|
|
|
|
|
|
/*
|
|
* Misc Settings
|
|
*/
|
|
#define CONFIG_RTC_BFIN
|
|
#define CONFIG_UART_CONSOLE 0
|
|
|
|
/* FLASH/ETHERNET uses the same async bank */
|
|
#define SHARED_RESOURCES 1
|
|
|
|
/* define to enable boot progress via leds */
|
|
/* #define CONFIG_SHOW_BOOT_PROGRESS */
|
|
|
|
/* define to enable run status via led */
|
|
/* #define CONFIG_STATUS_LED */
|
|
#ifdef CONFIG_STATUS_LED
|
|
#define CONFIG_BOARD_SPECIFIC_LED
|
|
#ifndef __ASSEMBLY__
|
|
typedef unsigned int led_id_t;
|
|
void __led_init(led_id_t mask, int state);
|
|
void __led_set(led_id_t mask, int state);
|
|
void __led_toggle(led_id_t mask);
|
|
#endif
|
|
/* use LED1 to indicate booting/alive */
|
|
#define STATUS_LED_BOOT 0
|
|
#define STATUS_LED_BIT 1
|
|
#define STATUS_LED_STATE STATUS_LED_ON
|
|
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 4)
|
|
/* use LED2 to indicate crash */
|
|
#define STATUS_LED_CRASH 1
|
|
#define STATUS_LED_BIT1 2
|
|
#define STATUS_LED_STATE1 STATUS_LED_ON
|
|
#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
|
|
#endif
|
|
|
|
/* define to enable splash screen support */
|
|
/* #define CONFIG_VIDEO */
|
|
|
|
|
|
/*
|
|
* Pull in common ADI header for remaining command/environment setup
|
|
*/
|
|
#include <configs/bfin_adi_common.h>
|
|
|
|
#endif
|