u-boot/include/configs/ds109.h
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

86 lines
2 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2011
* Jason Cooper <u-boot@lakedaemon.net>
*
* Based on work by:
* Marvell Semiconductor <www.marvell.com>
* Written-by: Siddarth Gore <gores@marvell.com>
*/
#ifndef _CONFIG_DS109_H
#define _CONFIG_DS109_H
/* Provide the MACH_TYPE value that the vendor kernel requires. */
#define CONFIG_MACH_TYPE 527
/*
* High Level Configuration Options (easy to change)
*/
#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
/*
* Commands configuration
*/
#define CONFIG_CMD_EXT2
/*
* mv-plug-common.h should be defined after CMD configs since it used them
* to enable certain macros
*/
#include "mv-plug-common.h"
/*
* Environment variables configurations
*/
#ifdef CONFIG_SPI_FLASH
#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */
#endif
#ifdef CONFIG_CMD_SF
#define CONFIG_HARD_SPI 1
#define CONFIG_ENV_SPI_BUS 0
#define CONFIG_ENV_SPI_CS 0
#define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */
#endif
/*
* max 4k env size is enough, but in case of nand
* it has to be rounded to sector size
*/
#define CONFIG_ENV_SIZE 0x10000
#define CONFIG_ENV_ADDR 0x3d0000
#define CONFIG_ENV_OFFSET 0x3d0000 /* env starts here */
/*
* Default environment variables
*/
#define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \
"${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
"setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
"bootm 0x6400000;"
#define CONFIG_EXTRA_ENV_SETTINGS \
"x_bootcmd_ethernet=ping 192.168.1.2\0" \
"x_bootcmd_usb=usb start\0" \
"x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
"x_bootargs=console=ttyS0,115200\0" \
"x_bootargs_root=root=/dev/sda2 rootdelay=10\0" \
"ipaddr=192.168.1.5\0"
/*
* Ethernet Driver configuration
*/
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0} /* enable one port */
#define CONFIG_PHY_BASE_ADR 8
#endif /* CONFIG_CMD_NET */
/*
* SATA Driver configuration
*/
#ifdef CONFIG_MVSATA_IDE
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
#endif /*CONFIG_MVSATA_IDE*/
#endif /* _CONFIG_DS109_H */