mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 22:03:15 +00:00
e27802af54
Boards can now use DM serial driver, or still legacy mcf uart driver version. Signed-off-by: Angelo Dureghello <angelo@sysam.it> Acked-by: Simon Glass <sjg@chromium.org>
230 lines
5.1 KiB
C
230 lines
5.1 KiB
C
/*
|
|
* (C) Copyright 2004-2007 Freescale Semiconductor, Inc.
|
|
* TsiChung Liew, Tsi-Chung.Liew@freescale.com.
|
|
*
|
|
* Modified to add device model (DM) support
|
|
* (C) Copyright 2015 Angelo Dureghello <angelo@sysam.it>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/*
|
|
* Minimal serial functions needed to use one of the uart ports
|
|
* as serial console interface.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <dm/platform_data/serial_coldfire.h>
|
|
#include <serial.h>
|
|
#include <linux/compiler.h>
|
|
#include <asm/immap.h>
|
|
#include <asm/uart.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
extern void uart_port_conf(int port);
|
|
|
|
static int mcf_serial_init_common(uart_t *uart, int port_idx, int baudrate)
|
|
{
|
|
u32 counter;
|
|
|
|
uart_port_conf(port_idx);
|
|
|
|
/* write to SICR: SIM2 = uart mode,dcd does not affect rx */
|
|
writeb(UART_UCR_RESET_RX, &uart->ucr);
|
|
writeb(UART_UCR_RESET_TX, &uart->ucr);
|
|
writeb(UART_UCR_RESET_ERROR, &uart->ucr);
|
|
writeb(UART_UCR_RESET_MR, &uart->ucr);
|
|
__asm__("nop");
|
|
|
|
writeb(0, &uart->uimr);
|
|
|
|
/* write to CSR: RX/TX baud rate from timers */
|
|
writeb(UART_UCSR_RCS_SYS_CLK | UART_UCSR_TCS_SYS_CLK, &uart->ucsr);
|
|
|
|
writeb(UART_UMR_BC_8 | UART_UMR_PM_NONE, &uart->umr);
|
|
writeb(UART_UMR_SB_STOP_BITS_1, &uart->umr);
|
|
|
|
/* Setting up BaudRate */
|
|
counter = (u32) ((gd->bus_clk / 32) + (baudrate / 2));
|
|
counter = counter / baudrate;
|
|
|
|
/* write to CTUR: divide counter upper byte */
|
|
writeb((u8)((counter & 0xff00) >> 8), &uart->ubg1);
|
|
/* write to CTLR: divide counter lower byte */
|
|
writeb((u8)(counter & 0x00ff), &uart->ubg2);
|
|
|
|
writeb(UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED, &uart->ucr);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void mcf_serial_setbrg_common(uart_t *uart, int baudrate)
|
|
{
|
|
u32 counter;
|
|
|
|
/* Setting up BaudRate */
|
|
counter = (u32) ((gd->bus_clk / 32) + (baudrate / 2));
|
|
counter = counter / baudrate;
|
|
|
|
/* write to CTUR: divide counter upper byte */
|
|
writeb(((counter & 0xff00) >> 8), &uart->ubg1);
|
|
/* write to CTLR: divide counter lower byte */
|
|
writeb((counter & 0x00ff), &uart->ubg2);
|
|
|
|
writeb(UART_UCR_RESET_RX, &uart->ucr);
|
|
writeb(UART_UCR_RESET_TX, &uart->ucr);
|
|
|
|
writeb(UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED, &uart->ucr);
|
|
}
|
|
|
|
#ifndef CONFIG_DM_SERIAL
|
|
|
|
static int mcf_serial_init(void)
|
|
{
|
|
uart_t *uart_base;
|
|
int port_idx;
|
|
|
|
uart_base = (uart_t *)CONFIG_SYS_UART_BASE;
|
|
port_idx = CONFIG_SYS_UART_PORT;
|
|
|
|
return mcf_serial_init_common(uart_base, port_idx, gd->baudrate);
|
|
}
|
|
|
|
static void mcf_serial_putc(const char c)
|
|
{
|
|
uart_t *uart = (uart_t *)CONFIG_SYS_UART_BASE;
|
|
|
|
if (c == '\n')
|
|
serial_putc('\r');
|
|
|
|
/* Wait for last character to go. */
|
|
while (!(readb(&uart->usr) & UART_USR_TXRDY))
|
|
;
|
|
|
|
writeb(c, &uart->utb);
|
|
}
|
|
|
|
static int mcf_serial_getc(void)
|
|
{
|
|
uart_t *uart = (uart_t *)CONFIG_SYS_UART_BASE;
|
|
|
|
/* Wait for a character to arrive. */
|
|
while (!(readb(&uart->usr) & UART_USR_RXRDY))
|
|
;
|
|
|
|
return readb(&uart->urb);
|
|
}
|
|
|
|
static void mcf_serial_setbrg(void)
|
|
{
|
|
uart_t *uart = (uart_t *)CONFIG_SYS_UART_BASE;
|
|
|
|
mcf_serial_setbrg_common(uart, gd->baudrate);
|
|
}
|
|
|
|
static int mcf_serial_tstc(void)
|
|
{
|
|
uart_t *uart = (uart_t *)CONFIG_SYS_UART_BASE;
|
|
|
|
return readb(&uart->usr) & UART_USR_RXRDY;
|
|
}
|
|
|
|
static struct serial_device mcf_serial_drv = {
|
|
.name = "mcf_serial",
|
|
.start = mcf_serial_init,
|
|
.stop = NULL,
|
|
.setbrg = mcf_serial_setbrg,
|
|
.putc = mcf_serial_putc,
|
|
.puts = default_serial_puts,
|
|
.getc = mcf_serial_getc,
|
|
.tstc = mcf_serial_tstc,
|
|
};
|
|
|
|
void mcf_serial_initialize(void)
|
|
{
|
|
serial_register(&mcf_serial_drv);
|
|
}
|
|
|
|
__weak struct serial_device *default_serial_console(void)
|
|
{
|
|
return &mcf_serial_drv;
|
|
}
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_DM_SERIAL
|
|
|
|
static int coldfire_serial_probe(struct udevice *dev)
|
|
{
|
|
struct coldfire_serial_platdata *plat = dev->platdata;
|
|
|
|
return mcf_serial_init_common((uart_t *)plat->base,
|
|
plat->port, plat->baudrate);
|
|
}
|
|
|
|
static int coldfire_serial_putc(struct udevice *dev, const char ch)
|
|
{
|
|
struct coldfire_serial_platdata *plat = dev->platdata;
|
|
uart_t *uart = (uart_t *)plat->base;
|
|
|
|
/* Wait for last character to go. */
|
|
if (!(readb(&uart->usr) & UART_USR_TXRDY))
|
|
return -EAGAIN;
|
|
|
|
writeb(ch, &uart->utb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int coldfire_serial_getc(struct udevice *dev)
|
|
{
|
|
struct coldfire_serial_platdata *plat = dev->platdata;
|
|
uart_t *uart = (uart_t *)(plat->base);
|
|
|
|
/* Wait for a character to arrive. */
|
|
if (!(readb(&uart->usr) & UART_USR_RXRDY))
|
|
return -EAGAIN;
|
|
|
|
return readb(&uart->urb);
|
|
}
|
|
|
|
int coldfire_serial_setbrg(struct udevice *dev, int baudrate)
|
|
{
|
|
struct coldfire_serial_platdata *plat = dev->platdata;
|
|
uart_t *uart = (uart_t *)(plat->base);
|
|
|
|
mcf_serial_setbrg_common(uart, baudrate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int coldfire_serial_pending(struct udevice *dev, bool input)
|
|
{
|
|
struct coldfire_serial_platdata *plat = dev->platdata;
|
|
uart_t *uart = (uart_t *)(plat->base);
|
|
|
|
if (input)
|
|
return readb(&uart->usr) & UART_USR_RXRDY ? 1 : 0;
|
|
else
|
|
return readb(&uart->usr) & UART_USR_TXRDY ? 0 : 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_serial_ops coldfire_serial_ops = {
|
|
.putc = coldfire_serial_putc,
|
|
.pending = coldfire_serial_pending,
|
|
.getc = coldfire_serial_getc,
|
|
.setbrg = coldfire_serial_setbrg,
|
|
};
|
|
|
|
U_BOOT_DRIVER(serial_coldfire) = {
|
|
.name = "serial_coldfire",
|
|
.id = UCLASS_SERIAL,
|
|
.probe = coldfire_serial_probe,
|
|
.ops = &coldfire_serial_ops,
|
|
.flags = DM_FLAG_PRE_RELOC,
|
|
};
|
|
#endif
|