2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-23 19:43:33 +00:00
u-boot/board/keymile/kmcent2/ddr.c
Niel Fourie 37bfd9cb50 PowerPC: keymile: Add support for kmcent2 board
Add basic support for the Hitachi Power Grids kmcent2 board, based
on the NXP QorIQ T1040 SoC.

Signed-off-by: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com>
Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com>
Signed-off-by: Niel Fourie <lusus@denx.de>
Cc: Holger Brunck <holger.brunck@hitachi-powergrids.com>
Cc: Heiko Schocher <hs@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
[Fixed blank line at EOF errors]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08 14:01:18 +05:30

88 lines
2.1 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2016 Keymile AG
* Rainer Boschung <rainer.boschung@keymile.com>
*
* Copyright 2013 Freescale Semiconductor, Inc.
*/
#include <asm/fsl_law.h>
#include <asm/mmu.h>
#include <asm/mpc85xx_gpio.h>
#include <fsl_ddr_sdram.h>
#include <fsl_ddr_dimm_params.h>
#include <hwconfig.h>
#include <i2c.h>
#include <init.h>
DECLARE_GLOBAL_DATA_PTR;
#define DQSn_POS(n) (3 - (((n) - 1) % 4)) * 8
#define DQSn_START(n, start) ((start) << DQSn_POS(n))
void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm,
unsigned int ctrl_num)
{
if (ctrl_num > 1) {
printf("Not supported controller number %d\n", ctrl_num);
return;
}
/* 1/2 clk delay between wr command and data strobe */
popts->write_data_delay = 4;
/* clk lauched 1/2 applied cylcle after address command */
popts->clk_adjust = 4;
/* 1T timing: command/address held for only 1 cycle */
popts->twot_en = 0;
popts->threet_en = 0;
/* optimize cpo for erratum A-009942 */
popts->cpo_sample = 0x3b;
/* we have only one module, half str should be OK */
popts->half_strength_driver_enable = 1;
/*
* Write leveling override
*/
/* set for DDR3-1600 */
popts->wrlvl_override = 1;
popts->wrlvl_sample = 0xf;
popts->wrlvl_start = 0x7;
/* DQS write leveling start time according layout */
popts->wrlvl_ctl_2 = (DQSn_START(1, 0x06) |
DQSn_START(2, 0x06) |
DQSn_START(3, 0x07) |
DQSn_START(4, 0x07));
popts->wrlvl_ctl_3 = (DQSn_START(5, 0x07) |
DQSn_START(6, 0x08) |
DQSn_START(7, 0x08) |
DQSn_START(8, 0x08));
/*
* rtt and wtt_wr override
*/
popts->rtt_override = 0;
/* Enable ZQ calibration */
popts->zq_en = 1;
/* DHC_EN =1, ODT = 75 Ohm */
popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
}
int dram_init(void)
{
phys_size_t dram_size;
puts("Initializing....using SPD\n");
dram_size = fsl_ddr_sdram();
dram_size = setup_ddr_tlbs(dram_size / 0x100000);
dram_size *= 0x100000;
gd->ram_size = dram_size;
return 0;
}