mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 01:38:22 +00:00
b5900a58ca
Since Gen3 SDHI has an internal DS signal AC-spec violation in HS400 mode, CRC-error may occur in read command in HS400 mode. This phoenomenon occurs at low/high temperature. To fix this, after completion of HS400 tuning, enable manual calibration. However, Gen3 M3 Ver.1.2 or earlier and H3 1.x does not support HS400. These SoC forcibly use HS200 mode by SoC attribute. The DT adjustment of the tuning parameters is not supported until the DT property names become clear. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Adapted from a patch by Takeshi Saito <takeshi.saito.xv@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Peng Fan <peng.fan@nxp.com>
162 lines
7 KiB
C
162 lines
7 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2016 Socionext Inc.
|
|
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
*/
|
|
|
|
#ifndef __TMIO_COMMON_H__
|
|
#define __TMIO_COMMON_H__
|
|
|
|
#define TMIO_SD_CMD 0x000 /* command */
|
|
#define TMIO_SD_CMD_NOSTOP BIT(14) /* No automatic CMD12 issue */
|
|
#define TMIO_SD_CMD_MULTI BIT(13) /* multiple block transfer */
|
|
#define TMIO_SD_CMD_RD BIT(12) /* 1: read, 0: write */
|
|
#define TMIO_SD_CMD_DATA BIT(11) /* data transfer */
|
|
#define TMIO_SD_CMD_APP BIT(6) /* ACMD preceded by CMD55 */
|
|
#define TMIO_SD_CMD_NORMAL (0 << 8)/* auto-detect of resp-type */
|
|
#define TMIO_SD_CMD_RSP_NONE (3 << 8)/* response: none */
|
|
#define TMIO_SD_CMD_RSP_R1 (4 << 8)/* response: R1, R5, R6, R7 */
|
|
#define TMIO_SD_CMD_RSP_R1B (5 << 8)/* response: R1b, R5b */
|
|
#define TMIO_SD_CMD_RSP_R2 (6 << 8)/* response: R2 */
|
|
#define TMIO_SD_CMD_RSP_R3 (7 << 8)/* response: R3, R4 */
|
|
#define TMIO_SD_ARG 0x008 /* command argument */
|
|
#define TMIO_SD_STOP 0x010 /* stop action control */
|
|
#define TMIO_SD_STOP_SEC BIT(8) /* use sector count */
|
|
#define TMIO_SD_STOP_STP BIT(0) /* issue CMD12 */
|
|
#define TMIO_SD_SECCNT 0x014 /* sector counter */
|
|
#define TMIO_SD_RSP10 0x018 /* response[39:8] */
|
|
#define TMIO_SD_RSP32 0x020 /* response[71:40] */
|
|
#define TMIO_SD_RSP54 0x028 /* response[103:72] */
|
|
#define TMIO_SD_RSP76 0x030 /* response[127:104] */
|
|
#define TMIO_SD_INFO1 0x038 /* IRQ status 1 */
|
|
#define TMIO_SD_INFO1_CD BIT(5) /* state of card detect */
|
|
#define TMIO_SD_INFO1_INSERT BIT(4) /* card inserted */
|
|
#define TMIO_SD_INFO1_REMOVE BIT(3) /* card removed */
|
|
#define TMIO_SD_INFO1_CMP BIT(2) /* data complete */
|
|
#define TMIO_SD_INFO1_RSP BIT(0) /* response complete */
|
|
#define TMIO_SD_INFO2 0x03c /* IRQ status 2 */
|
|
#define TMIO_SD_INFO2_ERR_ILA BIT(15) /* illegal access err */
|
|
#define TMIO_SD_INFO2_CBSY BIT(14) /* command busy */
|
|
#define TMIO_SD_INFO2_SCLKDIVEN BIT(13) /* command setting reg ena */
|
|
#define TMIO_SD_INFO2_BWE BIT(9) /* write buffer ready */
|
|
#define TMIO_SD_INFO2_BRE BIT(8) /* read buffer ready */
|
|
#define TMIO_SD_INFO2_DAT0 BIT(7) /* SDDAT0 */
|
|
#define TMIO_SD_INFO2_ERR_RTO BIT(6) /* response time out */
|
|
#define TMIO_SD_INFO2_ERR_ILR BIT(5) /* illegal read err */
|
|
#define TMIO_SD_INFO2_ERR_ILW BIT(4) /* illegal write err */
|
|
#define TMIO_SD_INFO2_ERR_TO BIT(3) /* time out error */
|
|
#define TMIO_SD_INFO2_ERR_END BIT(2) /* END bit error */
|
|
#define TMIO_SD_INFO2_ERR_CRC BIT(1) /* CRC error */
|
|
#define TMIO_SD_INFO2_ERR_IDX BIT(0) /* cmd index error */
|
|
#define TMIO_SD_INFO1_MASK 0x040
|
|
#define TMIO_SD_INFO2_MASK 0x044
|
|
#define TMIO_SD_CLKCTL 0x048 /* clock divisor */
|
|
#define TMIO_SD_CLKCTL_DIV_MASK 0x104ff
|
|
#define TMIO_SD_CLKCTL_DIV1024 BIT(16) /* SDCLK = CLK / 1024 */
|
|
#define TMIO_SD_CLKCTL_DIV512 BIT(7) /* SDCLK = CLK / 512 */
|
|
#define TMIO_SD_CLKCTL_DIV256 BIT(6) /* SDCLK = CLK / 256 */
|
|
#define TMIO_SD_CLKCTL_DIV128 BIT(5) /* SDCLK = CLK / 128 */
|
|
#define TMIO_SD_CLKCTL_DIV64 BIT(4) /* SDCLK = CLK / 64 */
|
|
#define TMIO_SD_CLKCTL_DIV32 BIT(3) /* SDCLK = CLK / 32 */
|
|
#define TMIO_SD_CLKCTL_DIV16 BIT(2) /* SDCLK = CLK / 16 */
|
|
#define TMIO_SD_CLKCTL_DIV8 BIT(1) /* SDCLK = CLK / 8 */
|
|
#define TMIO_SD_CLKCTL_DIV4 BIT(0) /* SDCLK = CLK / 4 */
|
|
#define TMIO_SD_CLKCTL_DIV2 0 /* SDCLK = CLK / 2 */
|
|
#define TMIO_SD_CLKCTL_DIV1 BIT(10) /* SDCLK = CLK */
|
|
#define TMIO_SD_CLKCTL_RCAR_DIV1 0xff /* SDCLK = CLK (RCar ver.) */
|
|
#define TMIO_SD_CLKCTL_OFFEN BIT(9) /* stop SDCLK when unused */
|
|
#define TMIO_SD_CLKCTL_SCLKEN BIT(8) /* SDCLK output enable */
|
|
#define TMIO_SD_SIZE 0x04c /* block size */
|
|
#define TMIO_SD_OPTION 0x050
|
|
#define TMIO_SD_OPTION_WIDTH_MASK (5 << 13)
|
|
#define TMIO_SD_OPTION_WIDTH_1 (4 << 13)
|
|
#define TMIO_SD_OPTION_WIDTH_4 (0 << 13)
|
|
#define TMIO_SD_OPTION_WIDTH_8 (1 << 13)
|
|
#define TMIO_SD_BUF 0x060 /* read/write buffer */
|
|
#define TMIO_SD_EXTMODE 0x1b0
|
|
#define TMIO_SD_EXTMODE_DMA_EN BIT(1) /* transfer 1: DMA, 0: pio */
|
|
#define TMIO_SD_SOFT_RST 0x1c0
|
|
#define TMIO_SD_SOFT_RST_RSTX BIT(0) /* reset deassert */
|
|
#define TMIO_SD_VERSION 0x1c4 /* version register */
|
|
#define TMIO_SD_VERSION_IP 0xff /* IP version */
|
|
#define TMIO_SD_HOST_MODE 0x1c8
|
|
#define TMIO_SD_IF_MODE 0x1cc
|
|
#define TMIO_SD_IF_MODE_DDR BIT(0) /* DDR mode */
|
|
#define TMIO_SD_VOLT 0x1e4 /* voltage switch */
|
|
#define TMIO_SD_VOLT_MASK (3 << 0)
|
|
#define TMIO_SD_VOLT_OFF (0 << 0)
|
|
#define TMIO_SD_VOLT_330 (1 << 0)/* 3.3V signal */
|
|
#define TMIO_SD_VOLT_180 (2 << 0)/* 1.8V signal */
|
|
#define TMIO_SD_DMA_MODE 0x410
|
|
#define TMIO_SD_DMA_MODE_DIR_RD BIT(16) /* 1: from device, 0: to dev */
|
|
#define TMIO_SD_DMA_MODE_ADDR_INC BIT(0) /* 1: address inc, 0: fixed */
|
|
#define TMIO_SD_DMA_CTL 0x414
|
|
#define TMIO_SD_DMA_CTL_START BIT(0) /* start DMA (auto cleared) */
|
|
#define TMIO_SD_DMA_RST 0x418
|
|
#define TMIO_SD_DMA_RST_RD BIT(9)
|
|
#define TMIO_SD_DMA_RST_WR BIT(8)
|
|
#define TMIO_SD_DMA_INFO1 0x420
|
|
#define TMIO_SD_DMA_INFO1_END_RD2 BIT(20) /* DMA from device is complete (uniphier) */
|
|
#define TMIO_SD_DMA_INFO1_END_RD BIT(17) /* DMA from device is complete (renesas) */
|
|
#define TMIO_SD_DMA_INFO1_END_WR BIT(16) /* DMA to device is complete */
|
|
#define TMIO_SD_DMA_INFO1_MASK 0x424
|
|
#define TMIO_SD_DMA_INFO2 0x428
|
|
#define TMIO_SD_DMA_INFO2_ERR_RD BIT(17)
|
|
#define TMIO_SD_DMA_INFO2_ERR_WR BIT(16)
|
|
#define TMIO_SD_DMA_INFO2_MASK 0x42c
|
|
#define TMIO_SD_DMA_ADDR_L 0x440
|
|
#define TMIO_SD_DMA_ADDR_H 0x444
|
|
|
|
/* alignment required by the DMA engine of this controller */
|
|
#define TMIO_SD_DMA_MINALIGN 0x10
|
|
|
|
struct tmio_sd_plat {
|
|
struct mmc_config cfg;
|
|
struct mmc mmc;
|
|
};
|
|
|
|
struct tmio_sd_priv {
|
|
void __iomem *regbase;
|
|
unsigned int version;
|
|
u32 caps;
|
|
u32 read_poll_flag;
|
|
#define TMIO_SD_CAP_NONREMOVABLE BIT(0) /* Nonremovable e.g. eMMC */
|
|
#define TMIO_SD_CAP_DMA_INTERNAL BIT(1) /* have internal DMA engine */
|
|
#define TMIO_SD_CAP_DIV1024 BIT(2) /* divisor 1024 is available */
|
|
#define TMIO_SD_CAP_64BIT BIT(3) /* Controller is 64bit */
|
|
#define TMIO_SD_CAP_16BIT BIT(4) /* Controller is 16bit */
|
|
#define TMIO_SD_CAP_RCAR_GEN2 BIT(5) /* Renesas RCar version of IP */
|
|
#define TMIO_SD_CAP_RCAR_GEN3 BIT(6) /* Renesas RCar version of IP */
|
|
#define TMIO_SD_CAP_RCAR_UHS BIT(7) /* Renesas RCar UHS/SDR modes */
|
|
#define TMIO_SD_CAP_RCAR \
|
|
(TMIO_SD_CAP_RCAR_GEN2 | TMIO_SD_CAP_RCAR_GEN3)
|
|
#ifdef CONFIG_DM_REGULATOR
|
|
struct udevice *vqmmc_dev;
|
|
#endif
|
|
#if CONFIG_IS_ENABLED(CLK)
|
|
struct clk clk;
|
|
#endif
|
|
#if CONFIG_IS_ENABLED(RENESAS_SDHI)
|
|
u8 tap_set;
|
|
u8 nrtaps;
|
|
bool needs_adjust_hs400;
|
|
bool adjust_hs400_enable;
|
|
u8 adjust_hs400_offset;
|
|
u8 adjust_hs400_calibrate;
|
|
#endif
|
|
ulong (*clk_get_rate)(struct tmio_sd_priv *);
|
|
};
|
|
|
|
int tmio_sd_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
|
|
struct mmc_data *data);
|
|
int tmio_sd_set_ios(struct udevice *dev);
|
|
int tmio_sd_get_cd(struct udevice *dev);
|
|
|
|
int tmio_sd_bind(struct udevice *dev);
|
|
int tmio_sd_probe(struct udevice *dev, u32 quirks);
|
|
|
|
u32 tmio_sd_readl(struct tmio_sd_priv *priv, unsigned int reg);
|
|
void tmio_sd_writel(struct tmio_sd_priv *priv,
|
|
u32 val, unsigned int reg);
|
|
|
|
#endif /* __TMIO_COMMON_H__ */
|