mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-02 17:41:08 +00:00
65dd74a674
Implement SDRAM init using the Memory Reference Code (mrc.bin) provided in the board directory and the SDRAM SPD information in the device tree. This also needs the Intel Management Engine (me.bin) to work. Binary blobs everywhere: so far we have MRC, ME and microcode. SDRAM init works by setting up various parameters and calling the MRC. This in turn does some sort of magic to work out how much memory there is and the timing parameters to use. It also sets up the DRAM controllers. When the MRC returns, we use the information it provides to map out the available memory in U-Boot. U-Boot normally moves itself to the top of RAM. On x86 the RAM is not generally contiguous, and anyway some RAM may be above 4GB which doesn't work in 32-bit mode. So we relocate to the top of the largest block of RAM we can find below 4GB. Memory above 4GB is accessible with special functions (see physmem). It would be possible to build U-Boot in 64-bit mode but this wouldn't necessarily provide any more memory, since the largest block is often below 4GB. Anyway U-Boot doesn't need huge amounts of memory - even a very large ramdisk seldom exceeds 100-200MB. U-Boot has support for booting 64-bit kernels directly so this does not pose a limitation in that area. Also there are probably parts of U-Boot that will not work correctly in 64-bit mode. The MRC is one. There is some work remaining in this area. Since memory init is very slow (over 500ms) it is possible to save the parameters in SPI flash to speed it up next time. Suspend/resume support is not fully implemented, or at least it is not efficient. With this patch, link boots to a prompt. Signed-off-by: Simon Glass <sjg@chromium.org>
223 lines
5.1 KiB
ArmAsm
223 lines
5.1 KiB
ArmAsm
/*
|
|
* U-boot - x86 Startup Code
|
|
*
|
|
* (C) Copyright 2008-2011
|
|
* Graeme Russ, <graeme.russ@gmail.com>
|
|
*
|
|
* (C) Copyright 2002
|
|
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <version.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/post.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/processor-flags.h>
|
|
#include <generated/generic-asm-offsets.h>
|
|
|
|
.section .text
|
|
.code32
|
|
.globl _start
|
|
.type _start, @function
|
|
.globl _x86boot_start
|
|
_x86boot_start:
|
|
/*
|
|
* This is the fail safe 32-bit bootstrap entry point. The
|
|
* following code is not executed from a cold-reset (actually, a
|
|
* lot of it is, but from real-mode after cold reset. It is
|
|
* repeated here to put the board into a state as close to cold
|
|
* reset as necessary)
|
|
*/
|
|
cli
|
|
cld
|
|
|
|
/* Turn off cache (this might require a 486-class CPU) */
|
|
movl %cr0, %eax
|
|
orl $(X86_CR0_NW | X86_CR0_CD), %eax
|
|
movl %eax, %cr0
|
|
wbinvd
|
|
|
|
/* Tell 32-bit code it is being entered from an in-RAM copy */
|
|
movw $GD_FLG_WARM_BOOT, %bx
|
|
jmp 1f
|
|
_start:
|
|
/*
|
|
* This is the 32-bit cold-reset entry point. Initialize %bx to 0
|
|
* in case we're preceeded by some sort of boot stub.
|
|
*/
|
|
movw $GD_FLG_COLD_BOOT, %bx
|
|
1:
|
|
/* Save BIST */
|
|
movl %eax, %ebp
|
|
|
|
/* Load the segement registes to match the gdt loaded in start16.S */
|
|
movl $(X86_GDT_ENTRY_32BIT_DS * X86_GDT_ENTRY_SIZE), %eax
|
|
movw %ax, %fs
|
|
movw %ax, %ds
|
|
movw %ax, %gs
|
|
movw %ax, %es
|
|
movw %ax, %ss
|
|
|
|
/* Clear the interrupt vectors */
|
|
lidt blank_idt_ptr
|
|
|
|
/* Early platform init (setup gpio, etc ) */
|
|
jmp early_board_init
|
|
.globl early_board_init_ret
|
|
early_board_init_ret:
|
|
post_code(POST_START)
|
|
|
|
/* Initialise Cache-As-RAM */
|
|
jmp car_init
|
|
.globl car_init_ret
|
|
car_init_ret:
|
|
/*
|
|
* We now have CONFIG_SYS_CAR_SIZE bytes of Cache-As-RAM (or SRAM,
|
|
* or fully initialised SDRAM - we really don't care which)
|
|
* starting at CONFIG_SYS_CAR_ADDR to be used as a temporary stack
|
|
* and early malloc area. The MRC requires some space at the top.
|
|
*
|
|
* Stack grows down from top of CAR. We have:
|
|
*
|
|
* top-> CONFIG_SYS_CAR_ADDR + CONFIG_SYS_CAR_SIZE
|
|
* MRC area
|
|
* global_data
|
|
* x86 global descriptor table
|
|
* early malloc area
|
|
* stack
|
|
* bottom-> CONFIG_SYS_CAR_ADDR
|
|
*/
|
|
movl $(CONFIG_SYS_CAR_ADDR + CONFIG_SYS_CAR_SIZE - 4), %esp
|
|
#ifdef CONFIG_DCACHE_RAM_MRC_VAR_SIZE
|
|
subl $CONFIG_DCACHE_RAM_MRC_VAR_SIZE, %esp
|
|
#endif
|
|
|
|
/* Reserve space on stack for global data */
|
|
subl $GENERATED_GBL_DATA_SIZE, %esp
|
|
|
|
/* Align global data to 16-byte boundary */
|
|
andl $0xfffffff0, %esp
|
|
post_code(POST_START_STACK)
|
|
|
|
/* Zero the global data since it won't happen later */
|
|
xorl %eax, %eax
|
|
movl $GENERATED_GBL_DATA_SIZE, %ecx
|
|
movl %esp, %edi
|
|
rep stosb
|
|
|
|
/* Setup first parameter to setup_gdt, pointer to global_data */
|
|
movl %esp, %eax
|
|
|
|
/* Reserve space for global descriptor table */
|
|
subl $X86_GDT_SIZE, %esp
|
|
|
|
/* Align temporary global descriptor table to 16-byte boundary */
|
|
andl $0xfffffff0, %esp
|
|
movl %esp, %ecx
|
|
|
|
#if defined(CONFIG_SYS_MALLOC_F_LEN)
|
|
subl $CONFIG_SYS_MALLOC_F_LEN, %esp
|
|
movl %eax, %edx
|
|
addl $GD_MALLOC_BASE, %edx
|
|
movl %esp, (%edx)
|
|
#endif
|
|
/* Store BIST */
|
|
movl %eax, %edx
|
|
addl $GD_BIST, %edx
|
|
movl %ebp, (%edx)
|
|
|
|
/* Set second parameter to setup_gdt */
|
|
movl %ecx, %edx
|
|
|
|
/* Setup global descriptor table so gd->xyz works */
|
|
call setup_gdt
|
|
|
|
/* Set parameter to board_init_f() to boot flags */
|
|
post_code(POST_START_DONE)
|
|
xorl %eax, %eax
|
|
|
|
/* Enter, U-boot! */
|
|
call board_init_f
|
|
|
|
/* indicate (lack of) progress */
|
|
movw $0x85, %ax
|
|
jmp die
|
|
|
|
.globl board_init_f_r_trampoline
|
|
.type board_init_f_r_trampoline, @function
|
|
board_init_f_r_trampoline:
|
|
/*
|
|
* SDRAM has been initialised, U-Boot code has been copied into
|
|
* RAM, BSS has been cleared and relocation adjustments have been
|
|
* made. It is now time to jump into the in-RAM copy of U-Boot
|
|
*
|
|
* %eax = Address of top of new stack
|
|
*/
|
|
|
|
/* Stack grows down from top of SDRAM */
|
|
movl %eax, %esp
|
|
|
|
/* Reserve space on stack for global data */
|
|
subl $GENERATED_GBL_DATA_SIZE, %esp
|
|
|
|
/* Align global data to 16-byte boundary */
|
|
andl $0xfffffff0, %esp
|
|
|
|
/* Setup first parameter to memcpy (and setup_gdt) */
|
|
movl %esp, %eax
|
|
|
|
/* Setup second parameter to memcpy */
|
|
fs movl 0, %edx
|
|
|
|
/* Set third parameter to memcpy */
|
|
movl $GENERATED_GBL_DATA_SIZE, %ecx
|
|
|
|
/* Copy global data from CAR to SDRAM stack */
|
|
call memcpy
|
|
|
|
/* Reserve space for global descriptor table */
|
|
subl $X86_GDT_SIZE, %esp
|
|
|
|
/* Align global descriptor table to 16-byte boundary */
|
|
andl $0xfffffff0, %esp
|
|
|
|
/* Set second parameter to setup_gdt */
|
|
movl %esp, %edx
|
|
|
|
/* Setup global descriptor table so gd->xyz works */
|
|
call setup_gdt
|
|
|
|
/* Re-enter U-Boot by calling board_init_f_r */
|
|
call board_init_f_r
|
|
|
|
die:
|
|
hlt
|
|
jmp die
|
|
hlt
|
|
|
|
blank_idt_ptr:
|
|
.word 0 /* limit */
|
|
.long 0 /* base */
|
|
|
|
.p2align 2 /* force 4-byte alignment */
|
|
|
|
multiboot_header:
|
|
/* magic */
|
|
.long 0x1BADB002
|
|
/* flags */
|
|
.long (1 << 16)
|
|
/* checksum */
|
|
.long -0x1BADB002 - (1 << 16)
|
|
/* header addr */
|
|
.long multiboot_header - _x86boot_start + CONFIG_SYS_TEXT_BASE
|
|
/* load addr */
|
|
.long CONFIG_SYS_TEXT_BASE
|
|
/* load end addr */
|
|
.long 0
|
|
/* bss end addr */
|
|
.long 0
|
|
/* entry addr */
|
|
.long CONFIG_SYS_TEXT_BASE
|