u-boot/cpu/ppc4xx/miiphy.c
Stefan Roese 725b53ac61 ppc4xx: Fix compilation warning for canyonlands & glacier
Signed-off-by: Stefan Roese <sr@denx.de>
2008-09-08 10:27:46 +02:00

364 lines
9.6 KiB
C

/*-----------------------------------------------------------------------------+
|
| This source code has been made available to you by IBM on an AS-IS
| basis. Anyone receiving this source is licensed under IBM
| copyrights to use it in any way he or she deems fit, including
| copying it, modifying it, compiling it, and redistributing it either
| with or without modifications. No license under IBM patents or
| patent applications is to be implied by the copyright license.
|
| Any user of this software should understand that IBM cannot provide
| technical support for this software and will not be responsible for
| any consequences resulting from the use of this software.
|
| Any person who transfers this source code or any derivative work
| must include the IBM copyright notice, this paragraph, and the
| preceding two paragraphs in the transferred software.
|
| COPYRIGHT I B M CORPORATION 1995
| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+-----------------------------------------------------------------------------*/
/*-----------------------------------------------------------------------------+
|
| File Name: miiphy.c
|
| Function: This module has utilities for accessing the MII PHY through
| the EMAC3 macro.
|
| Author: Mark Wisner
|
+-----------------------------------------------------------------------------*/
/* define DEBUG for debugging output (obviously ;-)) */
#if 0
#define DEBUG
#endif
#include <common.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <ppc_asm.tmpl>
#include <commproc.h>
#include <ppc4xx_enet.h>
#include <405_mal.h>
#include <miiphy.h>
#if !defined(CONFIG_PHY_CLK_FREQ)
#define CONFIG_PHY_CLK_FREQ 0
#endif
/***********************************************************/
/* Dump out to the screen PHY regs */
/***********************************************************/
void miiphy_dump (char *devname, unsigned char addr)
{
unsigned long i;
unsigned short data;
for (i = 0; i < 0x1A; i++) {
if (miiphy_read (devname, addr, i, &data)) {
printf ("read error for reg %lx\n", i);
return;
}
printf ("Phy reg %lx ==> %4x\n", i, data);
/* jump to the next set of regs */
if (i == 0x07)
i = 0x0f;
} /* end for loop */
} /* end dump */
/***********************************************************/
/* (Re)start autonegotiation */
/***********************************************************/
int phy_setup_aneg (char *devname, unsigned char addr)
{
u16 bmcr;
#if defined(CONFIG_PHY_DYNAMIC_ANEG)
/*
* Set up advertisement based on capablilities reported by the PHY.
* This should work for both copper and fiber.
*/
u16 bmsr;
#if defined(CONFIG_PHY_GIGE)
u16 exsr = 0x0000;
#endif
miiphy_read (devname, addr, PHY_BMSR, &bmsr);
#if defined(CONFIG_PHY_GIGE)
if (bmsr & PHY_BMSR_EXT_STAT)
miiphy_read (devname, addr, PHY_EXSR, &exsr);
if (exsr & (PHY_EXSR_1000XF | PHY_EXSR_1000XH)) {
/* 1000BASE-X */
u16 anar = 0x0000;
if (exsr & PHY_EXSR_1000XF)
anar |= PHY_X_ANLPAR_FD;
if (exsr & PHY_EXSR_1000XH)
anar |= PHY_X_ANLPAR_HD;
miiphy_write (devname, addr, PHY_ANAR, anar);
} else
#endif
{
u16 anar, btcr;
miiphy_read (devname, addr, PHY_ANAR, &anar);
anar &= ~(0x5000 | PHY_ANLPAR_T4 | PHY_ANLPAR_TXFD |
PHY_ANLPAR_TX | PHY_ANLPAR_10FD | PHY_ANLPAR_10);
miiphy_read (devname, addr, PHY_1000BTCR, &btcr);
btcr &= ~(0x00FF | PHY_1000BTCR_1000FD | PHY_1000BTCR_1000HD);
if (bmsr & PHY_BMSR_100T4)
anar |= PHY_ANLPAR_T4;
if (bmsr & PHY_BMSR_100TXF)
anar |= PHY_ANLPAR_TXFD;
if (bmsr & PHY_BMSR_100TXH)
anar |= PHY_ANLPAR_TX;
if (bmsr & PHY_BMSR_10TF)
anar |= PHY_ANLPAR_10FD;
if (bmsr & PHY_BMSR_10TH)
anar |= PHY_ANLPAR_10;
miiphy_write (devname, addr, PHY_ANAR, anar);
#if defined(CONFIG_PHY_GIGE)
if (exsr & PHY_EXSR_1000TF)
btcr |= PHY_1000BTCR_1000FD;
if (exsr & PHY_EXSR_1000TH)
btcr |= PHY_1000BTCR_1000HD;
miiphy_write (devname, addr, PHY_1000BTCR, btcr);
#endif
}
#else /* defined(CONFIG_PHY_DYNAMIC_ANEG) */
/*
* Set up standard advertisement
*/
u16 adv;
miiphy_read (devname, addr, PHY_ANAR, &adv);
adv |= (PHY_ANLPAR_ACK | PHY_ANLPAR_TXFD | PHY_ANLPAR_TX |
PHY_ANLPAR_10FD | PHY_ANLPAR_10);
miiphy_write (devname, addr, PHY_ANAR, adv);
miiphy_read (devname, addr, PHY_1000BTCR, &adv);
adv |= (0x0300);
miiphy_write (devname, addr, PHY_1000BTCR, adv);
#endif /* defined(CONFIG_PHY_DYNAMIC_ANEG) */
/* Start/Restart aneg */
miiphy_read (devname, addr, PHY_BMCR, &bmcr);
bmcr |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
miiphy_write (devname, addr, PHY_BMCR, bmcr);
return 0;
}
/***********************************************************/
/* read a phy reg and return the value with a rc */
/***********************************************************/
/* AMCC_TODO:
* Find out of the choice for the emac for MDIO is from the bridges,
* i.e. ZMII or RGMII as approporiate. If the bridges are not used
* to determine the emac for MDIO, then is the SDR0_ETH_CFG[MDIO_SEL]
* used? If so, then this routine below does not apply to the 460EX/GT.
*
* sr: Currently on 460EX only EMAC0 works with MDIO, so we always
* return EMAC0 offset here
* vg: For 460EX/460GT if internal GPCS PHY address is specified
* return appropriate EMAC offset
*/
unsigned int miiphy_getemac_offset(u8 addr)
{
#if (defined(CONFIG_440) && \
!defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
!defined(CONFIG_460EX) && !defined(CONFIG_460GT)) && \
defined(CONFIG_NET_MULTI)
unsigned long zmii;
unsigned long eoffset;
/* Need to find out which mdi port we're using */
zmii = in_be32((void *)ZMII_FER);
if (zmii & (ZMII_FER_MDI << ZMII_FER_V (0)))
/* using port 0 */
eoffset = 0;
else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (1)))
/* using port 1 */
eoffset = 0x100;
else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (2)))
/* using port 2 */
eoffset = 0x400;
else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (3)))
/* using port 3 */
eoffset = 0x600;
else {
/* None of the mdi ports are enabled! */
/* enable port 0 */
zmii |= ZMII_FER_MDI << ZMII_FER_V (0);
out_be32((void *)ZMII_FER, zmii);
eoffset = 0;
/* need to soft reset port 0 */
zmii = in_be32((void *)EMAC_M0);
zmii |= EMAC_M0_SRST;
out_be32((void *)EMAC_M0, zmii);
}
return (eoffset);
#else
#if defined(CONFIG_NET_MULTI) && defined(CONFIG_405EX)
unsigned long rgmii;
int devnum = 1;
rgmii = in_be32((void *)RGMII_FER);
if (rgmii & (1 << (19 - devnum)))
return 0x100;
#endif
#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
u32 eoffset = 0;
switch (addr) {
#if defined(CONFIG_HAS_ETH1) && defined(CONFIG_GPCS_PHY1_ADDR)
case CONFIG_GPCS_PHY1_ADDR:
if (addr == EMAC_M1_IPPA_GET(in_be32((void *)EMAC_M1 + 0x100)))
eoffset = 0x100;
break;
#endif
#if defined(CONFIG_HAS_ETH2) && defined(CONFIG_GPCS_PHY2_ADDR)
case CONFIG_GPCS_PHY2_ADDR:
if (addr == EMAC_M1_IPPA_GET(in_be32((void *)EMAC_M1 + 0x300)))
eoffset = 0x300;
break;
#endif
#if defined(CONFIG_HAS_ETH3) && defined(CONFIG_GPCS_PHY3_ADDR)
case CONFIG_GPCS_PHY3_ADDR:
if (addr == EMAC_M1_IPPA_GET(in_be32((void *)EMAC_M1 + 0x400)))
eoffset = 0x400;
break;
#endif
default:
eoffset = 0;
break;
}
return eoffset;
#endif
return 0;
#endif
}
static int emac_miiphy_wait(u32 emac_reg)
{
u32 sta_reg;
int i;
/* wait for completion */
i = 0;
do {
sta_reg = in_be32((void *)EMAC_STACR + emac_reg);
if (i++ > 5) {
debug("%s [%d]: Timeout! EMAC_STACR=0x%0x\n", __func__,
__LINE__, sta_reg);
return -1;
}
udelay(10);
} while ((sta_reg & EMAC_STACR_OC) == EMAC_STACR_OC_MASK);
return 0;
}
static int emac_miiphy_command(u8 addr, u8 reg, int cmd, u16 value)
{
u32 emac_reg;
u32 sta_reg;
emac_reg = miiphy_getemac_offset(addr);
/* wait for completion */
if (emac_miiphy_wait(emac_reg) != 0)
return -1;
sta_reg = reg; /* reg address */
/* set clock (50Mhz) and read flags */
#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX)
#if defined(CONFIG_IBM_EMAC4_V4) /* EMAC4 V4 changed bit setting */
sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | cmd;
#else
sta_reg |= cmd;
#endif
#else
sta_reg = (sta_reg | cmd) & ~EMAC_STACR_CLK_100MHZ;
#endif
/* Some boards (mainly 405EP based) define the PHY clock freqency fixed */
sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ;
sta_reg = sta_reg | ((u32)addr << 5); /* Phy address */
sta_reg = sta_reg | EMAC_STACR_OC_MASK; /* new IBM emac v4 */
if (cmd == EMAC_STACR_WRITE)
memcpy(&sta_reg, &value, 2); /* put in data */
out_be32((void *)EMAC_STACR + emac_reg, sta_reg);
debug("%s [%d]: sta_reg=%08x\n", __func__, __LINE__, sta_reg);
/* wait for completion */
if (emac_miiphy_wait(emac_reg) != 0)
return -1;
debug("%s [%d]: sta_reg=%08x\n", __func__, __LINE__, sta_reg);
if ((sta_reg & EMAC_STACR_PHYE) != 0)
return -1;
return 0;
}
int emac4xx_miiphy_read (char *devname, unsigned char addr, unsigned char reg,
unsigned short *value)
{
unsigned long sta_reg;
unsigned long emac_reg;
emac_reg = miiphy_getemac_offset(addr);
if (emac_miiphy_command(addr, reg, EMAC_STACR_READ, 0) != 0)
return -1;
sta_reg = in_be32((void *)EMAC_STACR + emac_reg);
*value = *(u16 *)(&sta_reg);
return 0;
}
/***********************************************************/
/* write a phy reg and return the value with a rc */
/***********************************************************/
int emac4xx_miiphy_write (char *devname, unsigned char addr, unsigned char reg,
unsigned short value)
{
return emac_miiphy_command(addr, reg, EMAC_STACR_WRITE, value);
}