mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 18:41:03 +00:00
1001502545
While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances where these configuration items are conditional on SPL. This commit adds SPL variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates the configurations as required. Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Trevor Woerner <trevor@toganlabs.com> [trini: Make the default depend on the setting for full U-Boot, update more zynq hardware] Signed-off-by: Tom Rini <trini@konsulko.com>
122 lines
2.8 KiB
ArmAsm
122 lines
2.8 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Secure entry function for CPU Core #1
|
|
*
|
|
* (C) Copyright 2016
|
|
* Texas Instruments, <www.ti.com>
|
|
*
|
|
* Author :
|
|
* Harinarayan Bhatta <harinarayan@ti.com>
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <asm/arch/omap.h>
|
|
#include <asm/omap_common.h>
|
|
#include <linux/linkage.h>
|
|
|
|
.arch_extension sec
|
|
|
|
#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
|
|
.global flush_dcache_range
|
|
#endif
|
|
|
|
#define AUX_CORE_BOOT_0 0x48281800
|
|
#define AUX_CORE_BOOT_1 0x48281804
|
|
|
|
#ifdef CONFIG_DRA7XX
|
|
/* DRA7xx ROM code function "startup_BootSlave". This function is where CPU1
|
|
* waits on WFE, polling on AUX_CORE_BOOT_x registers.
|
|
* This address is same for J6 and J6 Eco.
|
|
*/
|
|
#define ROM_FXN_STARTUP_BOOTSLAVE 0x00038a64
|
|
#endif
|
|
|
|
/* Assembly core where CPU1 is woken up into
|
|
* No need to save-restore registers, does not use stack.
|
|
*/
|
|
LENTRY(cpu1_entry)
|
|
ldr r4, =omap_smc_sec_cpu1_args
|
|
ldm r4, {r0,r1,r2,r3} @ Retrieve args
|
|
|
|
mov r6, #0xFF @ Indicate new Task call
|
|
mov r12, #0x00 @ Secure Service ID in R12
|
|
|
|
dsb
|
|
dmb
|
|
smc 0 @ SMC #0 to enter monitor mode
|
|
|
|
b .Lend @ exit at end of the service execution
|
|
nop
|
|
|
|
@ In case of IRQ happening in Secure, then ARM will branch here.
|
|
@ At that moment, IRQ will be pending and ARM will jump to Non Secure
|
|
@ IRQ handler
|
|
mov r12, #0xFE
|
|
|
|
dsb
|
|
dmb
|
|
smc 0 @ SMC #0 to enter monitor mode
|
|
|
|
.Lend:
|
|
ldr r4, =omap_smc_sec_cpu1_args
|
|
str r0, [r4, #0x10] @ save return value
|
|
ldr r4, =AUX_CORE_BOOT_0
|
|
mov r5, #0x0
|
|
str r5, [r4]
|
|
ldr r4, =ROM_FXN_STARTUP_BOOTSLAVE
|
|
sev @ Tell CPU0 we are done
|
|
bx r4 @ Jump back to ROM
|
|
END(cpu1_entry)
|
|
|
|
/*
|
|
* u32 omap_smc_sec_cpu1(u32 service, u32 proc_id, u32 flag, u32 *params);
|
|
*
|
|
* Makes a secure ROM/PPA call on CPU Core #1 on supported platforms.
|
|
* Assumes that CPU #1 is waiting in ROM code and not yet woken up or used by
|
|
* u-boot.
|
|
*/
|
|
ENTRY(omap_smc_sec_cpu1)
|
|
push {r4, r5, lr}
|
|
ldr r4, =omap_smc_sec_cpu1_args
|
|
stm r4, {r0,r1,r2,r3} @ Save args to memory
|
|
#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
|
|
mov r0, r4
|
|
mov r1, #CONFIG_SYS_CACHELINE_SIZE
|
|
add r1, r0, r1 @ dcache is not enabled on CPU1, so
|
|
blx flush_dcache_range @ flush the cache on args buffer
|
|
#endif
|
|
ldr r4, =AUX_CORE_BOOT_1
|
|
ldr r5, =cpu1_entry
|
|
str r5, [r4] @ Setup CPU1 entry function
|
|
ldr r4, =AUX_CORE_BOOT_0
|
|
mov r5, #0x10
|
|
str r5, [r4] @ Tell ROM to exit while loop
|
|
sev @ Wake up CPU1
|
|
.Lwait:
|
|
wfe @ Wait for CPU1 to finish
|
|
nop
|
|
ldr r5, [r4] @ Check if CPU1 is done
|
|
cmp r5, #0
|
|
bne .Lwait
|
|
|
|
ldr r4, =omap_smc_sec_cpu1_args
|
|
ldr r0, [r4, #0x10] @ Retrieve return value
|
|
pop {r4, r5, pc}
|
|
ENDPROC(omap_smc_sec_cpu1)
|
|
|
|
/*
|
|
* Buffer to save function arguments and return value for omap_smc_sec_cpu1
|
|
*/
|
|
.section .data
|
|
omap_smc_sec_cpu1_args:
|
|
#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
|
|
.balign CONFIG_SYS_CACHELINE_SIZE
|
|
.rept CONFIG_SYS_CACHELINE_SIZE/4
|
|
.word 0
|
|
.endr
|
|
#else
|
|
.rept 5
|
|
.word 0
|
|
.endr
|
|
#endif
|
|
END(omap_smc_sec_cpu1_args)
|