mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-19 03:08:31 +00:00
c5f8dd482b
Add a specific serial driver for Intel MID platforms. It has special fractional divider which can be programmed via UART_PS, UART_MUL, and UART_DIV registers. The UART clock is calculated as UART clock = XTAL * UART_MUL / UART_DIV The baudrate is calculated as baud rate = UART clock / UART_PS / DLAB Initialize fractional divider correctly for Intel Edison platform. For backward compatibility we have to set initial DLAB value to 16 and speed to 115200 baud, where initial frequency is 29491200Hz, and XTAL frequency is 38.4MHz. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
53 lines
1.8 KiB
Makefile
53 lines
1.8 KiB
Makefile
#
|
|
# (C) Copyright 2006-2009
|
|
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
#
|
|
# SPDX-License-Identifier: GPL-2.0+
|
|
#
|
|
|
|
ifdef CONFIG_DM_SERIAL
|
|
obj-$(CONFIG_$(SPL_TPL_)DM_SERIAL) += serial-uclass.o
|
|
obj-$(CONFIG_PL01X_SERIAL) += serial_pl01x.o
|
|
else
|
|
obj-y += serial.o
|
|
obj-$(CONFIG_PL010_SERIAL) += serial_pl01x.o
|
|
obj-$(CONFIG_PL011_SERIAL) += serial_pl01x.o
|
|
obj-$(CONFIG_SYS_NS16550_SERIAL) += serial_ns16550.o
|
|
endif
|
|
|
|
obj-$(CONFIG_ALTERA_UART) += altera_uart.o
|
|
obj-$(CONFIG_ALTERA_JTAG_UART) += altera_jtag_uart.o
|
|
obj-$(CONFIG_AR933X_UART) += serial_ar933x.o
|
|
obj-$(CONFIG_ARM_DCC) += arm_dcc.o
|
|
obj-$(CONFIG_ATMEL_USART) += atmel_usart.o
|
|
obj-$(CONFIG_EFI_APP) += serial_efi.o
|
|
obj-$(CONFIG_LPC32XX_HSUART) += lpc32xx_hsuart.o
|
|
obj-$(CONFIG_MCFUART) += mcfuart.o
|
|
obj-$(CONFIG_SYS_NS16550) += ns16550.o
|
|
obj-$(CONFIG_S5P) += serial_s5p.o
|
|
obj-$(CONFIG_MXC_UART) += serial_mxc.o
|
|
obj-$(CONFIG_PXA_SERIAL) += serial_pxa.o
|
|
obj-$(CONFIG_MESON_SERIAL) += serial_meson.o
|
|
obj-$(CONFIG_INTEL_MID_SERIAL) += serial_intel_mid.o
|
|
ifdef CONFIG_SPL_BUILD
|
|
obj-$(CONFIG_ROCKCHIP_SERIAL) += serial_rockchip.o
|
|
endif
|
|
obj-$(CONFIG_XILINX_UARTLITE) += serial_xuartlite.o
|
|
obj-$(CONFIG_SANDBOX_SERIAL) += sandbox.o
|
|
obj-$(CONFIG_SCIF_CONSOLE) += serial_sh.o
|
|
obj-$(CONFIG_ZYNQ_SERIAL) += serial_zynq.o
|
|
obj-$(CONFIG_FSL_LPUART) += serial_lpuart.o
|
|
obj-$(CONFIG_FSL_LINFLEXUART) += serial_linflexuart.o
|
|
obj-$(CONFIG_ARC_SERIAL) += serial_arc.o
|
|
obj-$(CONFIG_UNIPHIER_SERIAL) += serial_uniphier.o
|
|
obj-$(CONFIG_STM32_SERIAL) += serial_stm32.o
|
|
obj-$(CONFIG_STI_ASC_SERIAL) += serial_sti_asc.o
|
|
obj-$(CONFIG_PIC32_SERIAL) += serial_pic32.o
|
|
obj-$(CONFIG_STM32X7_SERIAL) += serial_stm32x7.o
|
|
obj-$(CONFIG_BCM283X_MU_SERIAL) += serial_bcm283x_mu.o
|
|
obj-$(CONFIG_MSM_SERIAL) += serial_msm.o
|
|
obj-$(CONFIG_MVEBU_A3700_UART) += serial_mvebu_a3700.o
|
|
|
|
ifndef CONFIG_SPL_BUILD
|
|
obj-$(CONFIG_USB_TTY) += usbtty.o
|
|
endif
|