2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-24 03:53:31 +00:00
u-boot/include/dt-bindings/memory/mpc83xx-sdram.h
Mario Six e40615565d ram: Add driver for MPC83xx
Add a RAM driver for the MPC83xx architecture.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-18 00:01:18 -06:00

161 lines
4 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2018
* Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc
*/
#ifndef DT_BINDINGS_MPC83XX_SDRAM_H
#define DT_BINDINGS_MPC83XX_SDRAM_H
/* DDR Control Driver register */
#define DSO_DISABLE 0
#define DSO_ENABLE 1
#define DSO_P_IMPEDANCE_HIGHEST_Z 0x0
#define DSO_P_IMPEDANCE_MUCH_HIGHER_Z 0x8
#define DSO_P_IMPEDANCE_HIGHER_Z 0xC
#define DSO_P_IMPEDANCE_NOMINAL 0xE
#define DSO_P_IMPEDANCE_LOWER_Z 0xF
#define DSO_N_IMPEDANCE_HIGHEST_Z 0x0
#define DSO_N_IMPEDANCE_MUCH_HIGHER_Z 0x8
#define DSO_N_IMPEDANCE_HIGHER_Z 0xC
#define DSO_N_IMPEDANCE_NOMINAL 0xE
#define DSO_N_IMPEDANCE_LOWER_Z 0xF
#define ODT_TERMINATION_75_OHM 0
#define ODT_TERMINATION_150_OHM 1
#define DDR_TYPE_DDR2_1_8_VOLT 0
#define DDR_TYPE_DDR1_2_5_VOLT 1
#define MVREF_SEL_EXTERNAL 0
#define MVREF_SEL_INTERNAL_GVDD 1
#define M_ODR_ENABLE 0
#define M_ODR_DISABLE 1
/* CS config register */
#define AUTO_PRECHARGE_ENABLE 0x00800000
#define AUTO_PRECHARGE_DISABLE 0x00000000
#define ODT_RD_NEVER 0x00000000
#define ODT_RD_ONLY_CURRENT 0x00100000
#define ODT_RD_ONLY_OTHER_CS 0x00200000
#define ODT_RD_ONLY_OTHER_DIMM 0x00300000
#define ODT_RD_ALL 0x00400000
#define ODT_WR_NEVER 0x00000000
#define ODT_WR_ONLY_CURRENT 0x00010000
#define ODT_WR_ONLY_OTHER_CS 0x00020000
#define ODT_WR_ONLY_OTHER_DIMM 0x00030000
#define ODT_WR_ALL 0x00040000
/* DDR SDRAM Clock Control register */
#define CLOCK_ADJUST_025 0x01000000
#define CLOCK_ADJUST_05 0x02000000
#define CLOCK_ADJUST_075 0x03000000
#define CLOCK_ADJUST_1 0x04000000
#define CASLAT_20 0x3 /* CAS latency = 2.0 */
#define CASLAT_25 0x4 /* CAS latency = 2.5 */
#define CASLAT_30 0x5 /* CAS latency = 3.0 */
#define CASLAT_35 0x6 /* CAS latency = 3.5 */
#define CASLAT_40 0x7 /* CAS latency = 4.0 */
#define CASLAT_45 0x8 /* CAS latency = 4.5 */
#define CASLAT_50 0x9 /* CAS latency = 5.0 */
#define CASLAT_55 0xa /* CAS latency = 5.5 */
#define CASLAT_60 0xb /* CAS latency = 6.0 */
#define CASLAT_65 0xc /* CAS latency = 6.5 */
#define CASLAT_70 0xd /* CAS latency = 7.0 */
#define CASLAT_75 0xe /* CAS latency = 7.5 */
#define CASLAT_80 0xf /* CAS latency = 8.0 */
/* DDR SDRAM Timing Configuration 2 register */
#define READ_LAT_PLUS_1 0x0
#define READ_LAT 0x2
#define READ_LAT_PLUS_1_4 0x3
#define READ_LAT_PLUS_1_2 0x4
#define READ_LAT_PLUS_3_4 0x5
#define READ_LAT_PLUS_5_4 0x7
#define READ_LAT_PLUS_3_2 0x8
#define READ_LAT_PLUS_7_4 0x9
#define READ_LAT_PLUS_2 0xA
#define READ_LAT_PLUS_9_4 0xB
#define READ_LAT_PLUS_5_2 0xC
#define READ_LAT_PLUS_11_4 0xD
#define READ_LAT_PLUS_3 0xE
#define READ_LAT_PLUS_13_4 0xF
#define READ_LAT_PLUS_7_2 0x10
#define READ_LAT_PLUS_15_4 0x11
#define READ_LAT_PLUS_4 0x12
#define READ_LAT_PLUS_17_4 0x13
#define READ_LAT_PLUS_9_2 0x14
#define READ_LAT_PLUS_19_4 0x15
#define CLOCK_DELAY_0 0x0
#define CLOCK_DELAY_1_4 0x1
#define CLOCK_DELAY_1_2 0x2
#define CLOCK_DELAY_3_4 0x3
#define CLOCK_DELAY_1 0x4
#define CLOCK_DELAY_5_4 0x5
#define CLOCK_DELAY_3_2 0x6
/* DDR SDRAM Control Configuration */
#define SREN_DISABLE 0x0
#define SREN_ENABLE 0x1
#define ECC_DISABLE 0x0
#define ECC_ENABLE 0x1
#define RD_DISABLE 0x0
#define RD_ENABLE 0x1
#define TYPE_DDR1 0x2
#define TYPE_DDR2 0x3
#define DYN_PWR_DISABLE 0x0
#define DYN_PWR_ENABLE 0x1
#define DATA_BUS_WIDTH_16 0x1
#define DATA_BUS_WIDTH_32 0x2
#define NCAP_DISABLE 0x0
#define NCAP_ENABLE 0x1
#define TIMING_1T 0x0
#define TIMING_2T 0x1
#define INTERLEAVE_NONE 0x0
#define INTERLEAVE_1_AND_2 0x1
#define PRECHARGE_MA_10 0x0
#define PRECHARGE_MA_8 0x1
#define STRENGTH_FULL 0x0
#define STRENGTH_HALF 0x1
#define INITIALIZATION_DONT_BYPASS 0x0
#define INITIALIZATION_BYPASS 0x1
/* DDR SDRAM Control Configuration 2 register */
#define MODE_NORMAL 0x0
#define MODE_REFRESH 0x1
#define DLL_RESET_ENABLE 0x0
#define DLL_RESET_DISABLE 0x1
#define DQS_TRUE 0x0
#define ODT_ASSERT_NEVER 0x0
#define ODT_ASSERT_WRITES 0x1
#define ODT_ASSERT_READS 0x2
#define ODT_ASSERT_ALWAYS 0x3
#endif