u-boot/arch/arm/mach-at91/include
Claudiu Beznea 8bad34a709 pinctrl: at91-pio4: add support for slew-rate
SAMA7G5 supports slew rate configuration. Adapt the driver for this.
For switching frequencies lower than 50MHz the slew rate needs to
be enabled. Since most of the pins on SAMA7G5 fall into this category
enabled the slew rate by default.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2021-03-02 09:28:33 +02:00
..
mach pinctrl: at91-pio4: add support for slew-rate 2021-03-02 09:28:33 +02:00