u-boot/board/samsung/smdk5250/smdk5250.c
Ajay Kumar 99e516295f EXYNOS5: Make all display related code dependent on CONFIG_LCD
u-boot compilation fails for smdk5250 when we deselect CONFIG_LCD
from the main config file.

Following error was observed:
drivers/video/libvideo.o: In function `exynos_lcd_init':
/home/ajay/u-boot-samsung/drivers/video/exynos_fb.c:68: undefined reference to `lcd_set_flush_dcache'

This is because exynos video drivers have dependency on CONFIG_LCD.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-11 17:15:04 +09:00

378 lines
9 KiB
C

/*
* Copyright (C) 2012 Samsung Electronics
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <fdtdec.h>
#include <asm/io.h>
#include <i2c.h>
#include <lcd.h>
#include <netdev.h>
#include <spi.h>
#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/power.h>
#include <asm/arch/sromc.h>
#include <asm/arch/dp_info.h>
#include <power/pmic.h>
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_USB_EHCI_EXYNOS
int board_usb_vbus_init(void)
{
struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)
samsung_get_base_gpio_part1();
/* Enable VBUS power switch */
s5p_gpio_direction_output(&gpio1->x2, 6, 1);
/* VBUS turn ON time */
mdelay(3);
return 0;
}
#endif
int board_init(void)
{
gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
#ifdef CONFIG_EXYNOS_SPI
spi_init();
#endif
#ifdef CONFIG_USB_EHCI_EXYNOS
board_usb_vbus_init();
#endif
return 0;
}
int dram_init(void)
{
gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE)
+ get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE)
+ get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE)
+ get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE)
+ get_ram_size((long *)PHYS_SDRAM_5, PHYS_SDRAM_7_SIZE)
+ get_ram_size((long *)PHYS_SDRAM_6, PHYS_SDRAM_7_SIZE)
+ get_ram_size((long *)PHYS_SDRAM_7, PHYS_SDRAM_7_SIZE)
+ get_ram_size((long *)PHYS_SDRAM_8, PHYS_SDRAM_8_SIZE);
return 0;
}
#if defined(CONFIG_POWER)
int power_init_board(void)
{
if (pmic_init(I2C_PMIC))
return -1;
else
return 0;
}
#endif
void dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1,
PHYS_SDRAM_1_SIZE);
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2,
PHYS_SDRAM_2_SIZE);
gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
gd->bd->bi_dram[2].size = get_ram_size((long *)PHYS_SDRAM_3,
PHYS_SDRAM_3_SIZE);
gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
gd->bd->bi_dram[3].size = get_ram_size((long *)PHYS_SDRAM_4,
PHYS_SDRAM_4_SIZE);
gd->bd->bi_dram[4].start = PHYS_SDRAM_5;
gd->bd->bi_dram[4].size = get_ram_size((long *)PHYS_SDRAM_5,
PHYS_SDRAM_5_SIZE);
gd->bd->bi_dram[5].start = PHYS_SDRAM_6;
gd->bd->bi_dram[5].size = get_ram_size((long *)PHYS_SDRAM_6,
PHYS_SDRAM_6_SIZE);
gd->bd->bi_dram[6].start = PHYS_SDRAM_7;
gd->bd->bi_dram[6].size = get_ram_size((long *)PHYS_SDRAM_7,
PHYS_SDRAM_7_SIZE);
gd->bd->bi_dram[7].start = PHYS_SDRAM_8;
gd->bd->bi_dram[7].size = get_ram_size((long *)PHYS_SDRAM_8,
PHYS_SDRAM_8_SIZE);
}
#ifdef CONFIG_OF_CONTROL
static int decode_sromc(const void *blob, struct fdt_sromc *config)
{
int err;
int node;
node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS5_SROMC);
if (node < 0) {
debug("Could not find SROMC node\n");
return node;
}
config->bank = fdtdec_get_int(blob, node, "bank", 0);
config->width = fdtdec_get_int(blob, node, "width", 2);
err = fdtdec_get_int_array(blob, node, "srom-timing", config->timing,
FDT_SROM_TIMING_COUNT);
if (err < 0) {
debug("Could not decode SROMC configuration\n");
return -FDT_ERR_NOTFOUND;
}
return 0;
}
#endif
int board_eth_init(bd_t *bis)
{
#ifdef CONFIG_SMC911X
u32 smc_bw_conf, smc_bc_conf;
struct fdt_sromc config;
fdt_addr_t base_addr;
int node;
#ifdef CONFIG_OF_CONTROL
node = decode_sromc(gd->fdt_blob, &config);
if (node < 0) {
debug("%s: Could not find sromc configuration\n", __func__);
return 0;
}
node = fdtdec_next_compatible(gd->fdt_blob, node, COMPAT_SMSC_LAN9215);
if (node < 0) {
debug("%s: Could not find lan9215 configuration\n", __func__);
return 0;
}
/* We now have a node, so any problems from now on are errors */
base_addr = fdtdec_get_addr(gd->fdt_blob, node, "reg");
if (base_addr == FDT_ADDR_T_NONE) {
debug("%s: Could not find lan9215 address\n", __func__);
return -1;
}
#else
/* Non-FDT configuration - bank number and timing parameters*/
config.bank = CONFIG_ENV_SROM_BANK;
config.width = 2;
config.timing[FDT_SROM_TACS] = 0x01;
config.timing[FDT_SROM_TCOS] = 0x01;
config.timing[FDT_SROM_TACC] = 0x06;
config.timing[FDT_SROM_TCOH] = 0x01;
config.timing[FDT_SROM_TAH] = 0x0C;
config.timing[FDT_SROM_TACP] = 0x09;
config.timing[FDT_SROM_PMC] = 0x01;
base_addr = CONFIG_SMC911X_BASE;
#endif
/* Ethernet needs data bus width of 16 bits */
if (config.width != 2) {
debug("%s: Unsupported bus width %d\n", __func__,
config.width);
return -1;
}
smc_bw_conf = SROMC_DATA16_WIDTH(config.bank)
| SROMC_BYTE_ENABLE(config.bank);
smc_bc_conf = SROMC_BC_TACS(config.timing[FDT_SROM_TACS]) |\
SROMC_BC_TCOS(config.timing[FDT_SROM_TCOS]) |\
SROMC_BC_TACC(config.timing[FDT_SROM_TACC]) |\
SROMC_BC_TCOH(config.timing[FDT_SROM_TCOH]) |\
SROMC_BC_TAH(config.timing[FDT_SROM_TAH]) |\
SROMC_BC_TACP(config.timing[FDT_SROM_TACP]) |\
SROMC_BC_PMC(config.timing[FDT_SROM_PMC]);
/* Select and configure the SROMC bank */
exynos_pinmux_config(PERIPH_ID_SROMC, config.bank);
s5p_config_sromc(config.bank, smc_bw_conf, smc_bc_conf);
return smc911x_initialize(0, base_addr);
#endif
return 0;
}
#ifdef CONFIG_DISPLAY_BOARDINFO
int checkboard(void)
{
printf("\nBoard: SMDK5250\n");
return 0;
}
#endif
#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
int err;
err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);
if (err) {
debug("SDMMC0 not configured\n");
return err;
}
err = s5p_mmc_init(0, 8);
return err;
}
#endif
static int board_uart_init(void)
{
int err;
err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE);
if (err) {
debug("UART0 not configured\n");
return err;
}
err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE);
if (err) {
debug("UART1 not configured\n");
return err;
}
err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE);
if (err) {
debug("UART2 not configured\n");
return err;
}
err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
if (err) {
debug("UART3 not configured\n");
return err;
}
return 0;
}
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
int err;
err = board_uart_init();
if (err) {
debug("UART init failed\n");
return err;
}
#ifdef CONFIG_SYS_I2C_INIT_BOARD
board_i2c_init(gd->fdt_blob);
#endif
return err;
}
#endif
#ifdef CONFIG_LCD
void cfg_lcd_gpio(void)
{
struct exynos5_gpio_part1 *gpio1 =
(struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
/* For Backlight */
s5p_gpio_cfg_pin(&gpio1->b2, 0, GPIO_OUTPUT);
s5p_gpio_set_value(&gpio1->b2, 0, 1);
/* LCD power on */
s5p_gpio_cfg_pin(&gpio1->x1, 5, GPIO_OUTPUT);
s5p_gpio_set_value(&gpio1->x1, 5, 1);
/* Set Hotplug detect for DP */
s5p_gpio_cfg_pin(&gpio1->x0, 7, GPIO_FUNC(0x3));
}
vidinfo_t panel_info = {
.vl_freq = 60,
.vl_col = 2560,
.vl_row = 1600,
.vl_width = 2560,
.vl_height = 1600,
.vl_clkp = CONFIG_SYS_LOW,
.vl_hsp = CONFIG_SYS_LOW,
.vl_vsp = CONFIG_SYS_LOW,
.vl_dp = CONFIG_SYS_LOW,
.vl_bpix = 4, /* LCD_BPP = 2^4, for output conosle on LCD */
/* wDP panel timing infomation */
.vl_hspw = 32,
.vl_hbpd = 80,
.vl_hfpd = 48,
.vl_vspw = 6,
.vl_vbpd = 37,
.vl_vfpd = 3,
.vl_cmd_allow_len = 0xf,
.win_id = 3,
.cfg_gpio = cfg_lcd_gpio,
.backlight_on = NULL,
.lcd_power_on = NULL,
.reset_lcd = NULL,
.dual_lcd_enabled = 0,
.init_delay = 0,
.power_on_delay = 0,
.reset_delay = 0,
.interface_mode = FIMD_RGB_INTERFACE,
.dp_enabled = 1,
};
static struct edp_device_info edp_info = {
.disp_info = {
.h_res = 2560,
.h_sync_width = 32,
.h_back_porch = 80,
.h_front_porch = 48,
.v_res = 1600,
.v_sync_width = 6,
.v_back_porch = 37,
.v_front_porch = 3,
.v_sync_rate = 60,
},
.lt_info = {
.lt_status = DP_LT_NONE,
},
.video_info = {
.master_mode = 0,
.bist_mode = DP_DISABLE,
.bist_pattern = NO_PATTERN,
.h_sync_polarity = 0,
.v_sync_polarity = 0,
.interlaced = 0,
.color_space = COLOR_RGB,
.dynamic_range = VESA,
.ycbcr_coeff = COLOR_YCBCR601,
.color_depth = COLOR_8,
},
};
static struct exynos_dp_platform_data dp_platform_data = {
.phy_enable = set_dp_phy_ctrl,
.edp_dev_info = &edp_info,
};
void init_panel_info(vidinfo_t *vid)
{
vid->rgb_mode = MODE_RGB_P,
exynos_set_dp_platform_data(&dp_platform_data);
}
#endif