mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-21 10:43:06 +00:00
c05ed00afb
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
312 lines
7.1 KiB
C
312 lines
7.1 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2011, 2013 Renesas Solutions Corp.
|
|
* Copyright (C) 2011, 2013 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
|
|
*
|
|
* NOTE: This driver should be converted to driver model before June 2017.
|
|
* Please see doc/driver-model/i2c-howto.rst for instructions.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <log.h>
|
|
#include <asm/io.h>
|
|
#include <linux/delay.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* Every register is 32bit aligned, but only 8bits in size */
|
|
#define ureg(name) u8 name; u8 __pad_##name##0; u16 __pad_##name##1;
|
|
struct sh_i2c {
|
|
ureg(icdr);
|
|
ureg(iccr);
|
|
ureg(icsr);
|
|
ureg(icic);
|
|
ureg(iccl);
|
|
ureg(icch);
|
|
};
|
|
#undef ureg
|
|
|
|
/* ICCR */
|
|
#define SH_I2C_ICCR_ICE (1 << 7)
|
|
#define SH_I2C_ICCR_RACK (1 << 6)
|
|
#define SH_I2C_ICCR_RTS (1 << 4)
|
|
#define SH_I2C_ICCR_BUSY (1 << 2)
|
|
#define SH_I2C_ICCR_SCP (1 << 0)
|
|
|
|
/* ICSR / ICIC */
|
|
#define SH_IC_BUSY (1 << 4)
|
|
#define SH_IC_TACK (1 << 2)
|
|
#define SH_IC_WAIT (1 << 1)
|
|
#define SH_IC_DTE (1 << 0)
|
|
|
|
#ifdef CONFIG_SH_I2C_8BIT
|
|
/* store 8th bit of iccl and icch in ICIC register */
|
|
#define SH_I2C_ICIC_ICCLB8 (1 << 7)
|
|
#define SH_I2C_ICIC_ICCHB8 (1 << 6)
|
|
#endif
|
|
|
|
static const struct sh_i2c *i2c_dev[CONFIG_SYS_I2C_SH_NUM_CONTROLLERS] = {
|
|
(struct sh_i2c *)CONFIG_SYS_I2C_SH_BASE0,
|
|
#ifdef CONFIG_SYS_I2C_SH_BASE1
|
|
(struct sh_i2c *)CONFIG_SYS_I2C_SH_BASE1,
|
|
#endif
|
|
#ifdef CONFIG_SYS_I2C_SH_BASE2
|
|
(struct sh_i2c *)CONFIG_SYS_I2C_SH_BASE2,
|
|
#endif
|
|
#ifdef CONFIG_SYS_I2C_SH_BASE3
|
|
(struct sh_i2c *)CONFIG_SYS_I2C_SH_BASE3,
|
|
#endif
|
|
#ifdef CONFIG_SYS_I2C_SH_BASE4
|
|
(struct sh_i2c *)CONFIG_SYS_I2C_SH_BASE4,
|
|
#endif
|
|
};
|
|
|
|
static u16 iccl, icch;
|
|
|
|
#define IRQ_WAIT 1000
|
|
|
|
static void sh_irq_dte(struct sh_i2c *dev)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < IRQ_WAIT; i++) {
|
|
if (SH_IC_DTE & readb(&dev->icsr))
|
|
break;
|
|
udelay(10);
|
|
}
|
|
}
|
|
|
|
static int sh_irq_dte_with_tack(struct sh_i2c *dev)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < IRQ_WAIT; i++) {
|
|
if (SH_IC_DTE & readb(&dev->icsr))
|
|
break;
|
|
if (SH_IC_TACK & readb(&dev->icsr))
|
|
return -1;
|
|
udelay(10);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void sh_irq_busy(struct sh_i2c *dev)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < IRQ_WAIT; i++) {
|
|
if (!(SH_IC_BUSY & readb(&dev->icsr)))
|
|
break;
|
|
udelay(10);
|
|
}
|
|
}
|
|
|
|
static int sh_i2c_set_addr(struct sh_i2c *dev, u8 chip, u8 addr, int stop)
|
|
{
|
|
u8 icic = SH_IC_TACK;
|
|
|
|
debug("%s: chip: %x, addr: %x iccl: %x, icch %x\n",
|
|
__func__, chip, addr, iccl, icch);
|
|
clrbits_8(&dev->iccr, SH_I2C_ICCR_ICE);
|
|
setbits_8(&dev->iccr, SH_I2C_ICCR_ICE);
|
|
|
|
writeb(iccl & 0xff, &dev->iccl);
|
|
writeb(icch & 0xff, &dev->icch);
|
|
#ifdef CONFIG_SH_I2C_8BIT
|
|
if (iccl > 0xff)
|
|
icic |= SH_I2C_ICIC_ICCLB8;
|
|
if (icch > 0xff)
|
|
icic |= SH_I2C_ICIC_ICCHB8;
|
|
#endif
|
|
writeb(icic, &dev->icic);
|
|
|
|
writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS|SH_I2C_ICCR_BUSY), &dev->iccr);
|
|
sh_irq_dte(dev);
|
|
|
|
clrbits_8(&dev->icsr, SH_IC_TACK);
|
|
writeb(chip << 1, &dev->icdr);
|
|
if (sh_irq_dte_with_tack(dev) != 0)
|
|
return -1;
|
|
|
|
writeb(addr, &dev->icdr);
|
|
if (stop)
|
|
writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS), &dev->iccr);
|
|
|
|
if (sh_irq_dte_with_tack(dev) != 0)
|
|
return -1;
|
|
return 0;
|
|
}
|
|
|
|
static void sh_i2c_finish(struct sh_i2c *dev)
|
|
{
|
|
writeb(0, &dev->icsr);
|
|
clrbits_8(&dev->iccr, SH_I2C_ICCR_ICE);
|
|
}
|
|
|
|
static int
|
|
sh_i2c_raw_write(struct sh_i2c *dev, u8 chip, uint addr, u8 val)
|
|
{
|
|
int ret = -1;
|
|
if (sh_i2c_set_addr(dev, chip, addr, 0) != 0)
|
|
goto exit0;
|
|
udelay(10);
|
|
|
|
writeb(val, &dev->icdr);
|
|
if (sh_irq_dte_with_tack(dev) != 0)
|
|
goto exit0;
|
|
|
|
writeb((SH_I2C_ICCR_ICE | SH_I2C_ICCR_RTS), &dev->iccr);
|
|
if (sh_irq_dte_with_tack(dev) != 0)
|
|
goto exit0;
|
|
sh_irq_busy(dev);
|
|
ret = 0;
|
|
|
|
exit0:
|
|
sh_i2c_finish(dev);
|
|
return ret;
|
|
}
|
|
|
|
static int sh_i2c_raw_read(struct sh_i2c *dev, u8 chip, u8 addr)
|
|
{
|
|
int ret = -1;
|
|
|
|
#if defined(CONFIG_SH73A0)
|
|
if (sh_i2c_set_addr(dev, chip, addr, 0) != 0)
|
|
goto exit0;
|
|
#else
|
|
if (sh_i2c_set_addr(dev, chip, addr, 1) != 0)
|
|
goto exit0;
|
|
udelay(100);
|
|
#endif
|
|
|
|
writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS|SH_I2C_ICCR_BUSY), &dev->iccr);
|
|
sh_irq_dte(dev);
|
|
|
|
writeb(chip << 1 | 0x01, &dev->icdr);
|
|
if (sh_irq_dte_with_tack(dev) != 0)
|
|
goto exit0;
|
|
|
|
writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_SCP), &dev->iccr);
|
|
if (sh_irq_dte_with_tack(dev) != 0)
|
|
goto exit0;
|
|
|
|
ret = readb(&dev->icdr) & 0xff;
|
|
|
|
writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RACK), &dev->iccr);
|
|
readb(&dev->icdr); /* Dummy read */
|
|
sh_irq_busy(dev);
|
|
|
|
exit0:
|
|
sh_i2c_finish(dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
sh_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd)
|
|
{
|
|
int num, denom, tmp;
|
|
|
|
/* No i2c support prior to relocation */
|
|
if (!(gd->flags & GD_FLG_RELOC))
|
|
return;
|
|
|
|
/*
|
|
* Calculate the value for iccl. From the data sheet:
|
|
* iccl = (p-clock / transfer-rate) * (L / (L + H))
|
|
* where L and H are the SCL low and high ratio.
|
|
*/
|
|
num = CONFIG_SH_I2C_CLOCK * CONFIG_SH_I2C_DATA_LOW;
|
|
denom = speed * (CONFIG_SH_I2C_DATA_HIGH + CONFIG_SH_I2C_DATA_LOW);
|
|
tmp = num * 10 / denom;
|
|
if (tmp % 10 >= 5)
|
|
iccl = (u16)((num/denom) + 1);
|
|
else
|
|
iccl = (u16)(num/denom);
|
|
|
|
/* Calculate the value for icch. From the data sheet:
|
|
icch = (p clock / transfer rate) * (H / (L + H)) */
|
|
num = CONFIG_SH_I2C_CLOCK * CONFIG_SH_I2C_DATA_HIGH;
|
|
tmp = num * 10 / denom;
|
|
if (tmp % 10 >= 5)
|
|
icch = (u16)((num/denom) + 1);
|
|
else
|
|
icch = (u16)(num/denom);
|
|
|
|
debug("clock: %d, speed %d, iccl: %x, icch: %x\n",
|
|
CONFIG_SH_I2C_CLOCK, speed, iccl, icch);
|
|
}
|
|
|
|
static int sh_i2c_read(struct i2c_adapter *adap, uint8_t chip,
|
|
uint addr, int alen, u8 *data, int len)
|
|
{
|
|
int ret, i;
|
|
struct sh_i2c *dev = (struct sh_i2c *)i2c_dev[adap->hwadapnr];
|
|
|
|
for (i = 0; i < len; i++) {
|
|
ret = sh_i2c_raw_read(dev, chip, addr + i);
|
|
if (ret < 0)
|
|
return -1;
|
|
|
|
data[i] = ret & 0xff;
|
|
debug("%s: data[%d]: %02x\n", __func__, i, data[i]);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh_i2c_write(struct i2c_adapter *adap, uint8_t chip, uint addr,
|
|
int alen, u8 *data, int len)
|
|
{
|
|
struct sh_i2c *dev = (struct sh_i2c *)i2c_dev[adap->hwadapnr];
|
|
int i;
|
|
|
|
for (i = 0; i < len; i++) {
|
|
debug("%s: data[%d]: %02x\n", __func__, i, data[i]);
|
|
if (sh_i2c_raw_write(dev, chip, addr + i, data[i]) != 0)
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
sh_i2c_probe(struct i2c_adapter *adap, u8 dev)
|
|
{
|
|
u8 dummy[1];
|
|
|
|
return sh_i2c_read(adap, dev, 0, 0, dummy, sizeof dummy);
|
|
}
|
|
|
|
static unsigned int sh_i2c_set_bus_speed(struct i2c_adapter *adap,
|
|
unsigned int speed)
|
|
{
|
|
struct sh_i2c *dev = (struct sh_i2c *)i2c_dev[adap->hwadapnr];
|
|
|
|
sh_i2c_finish(dev);
|
|
sh_i2c_init(adap, speed, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Register RCAR i2c adapters
|
|
*/
|
|
U_BOOT_I2C_ADAP_COMPLETE(sh_0, sh_i2c_init, sh_i2c_probe, sh_i2c_read,
|
|
sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SH_SPEED0, 0, 0)
|
|
#ifdef CONFIG_SYS_I2C_SH_BASE1
|
|
U_BOOT_I2C_ADAP_COMPLETE(sh_1, sh_i2c_init, sh_i2c_probe, sh_i2c_read,
|
|
sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SH_SPEED1, 0, 1)
|
|
#endif
|
|
#ifdef CONFIG_SYS_I2C_SH_BASE2
|
|
U_BOOT_I2C_ADAP_COMPLETE(sh_2, sh_i2c_init, sh_i2c_probe, sh_i2c_read,
|
|
sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SH_SPEED2, 0, 2)
|
|
#endif
|
|
#ifdef CONFIG_SYS_I2C_SH_BASE3
|
|
U_BOOT_I2C_ADAP_COMPLETE(sh_3, sh_i2c_init, sh_i2c_probe, sh_i2c_read,
|
|
sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SH_SPEED3, 0, 3)
|
|
#endif
|
|
#ifdef CONFIG_SYS_I2C_SH_BASE4
|
|
U_BOOT_I2C_ADAP_COMPLETE(sh_4, sh_i2c_init, sh_i2c_probe, sh_i2c_read,
|
|
sh_i2c_write, sh_i2c_set_bus_speed, CONFIG_SYS_I2C_SH_SPEED4, 0, 4)
|
|
#endif
|