mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 23:47:24 +00:00
13e28f4987
There are a large number of options under CONFIG_SYS (but some of these are elsewhere, spotted while cleaning CONFIG_SYS) that are never referenced, or only used slightly later in the config file. Remove or restructure these. Signed-off-by: Tom Rini <trini@konsulko.com>
98 lines
2.6 KiB
C
98 lines
2.6 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Config file for Compulab CM-T335 board
|
|
*
|
|
* Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/
|
|
*
|
|
* Author: Ilya Ledvich <ilya@compulab.co.il>
|
|
*/
|
|
|
|
#ifndef __CONFIG_CM_T335_H
|
|
#define __CONFIG_CM_T335_H
|
|
|
|
#include <configs/ti_am335x_common.h>
|
|
|
|
#undef CONFIG_MAX_RAM_BANK_SIZE
|
|
#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* 512MB */
|
|
|
|
/* Clock Defines */
|
|
#define V_OSCK 25000000 /* Clock output from T2 */
|
|
#define V_SCLK (V_OSCK)
|
|
|
|
#define MMCARGS \
|
|
"mmcdev=0\0" \
|
|
"mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
|
|
"mmcrootfstype=ext4\0" \
|
|
"mmcargs=setenv bootargs console=${console} " \
|
|
"root=${mmcroot} " \
|
|
"rootfstype=${mmcrootfstype}\0" \
|
|
"mmcboot=echo Booting from mmc ...; " \
|
|
"run mmcargs; " \
|
|
"bootm ${loadaddr}\0"
|
|
|
|
#define NANDARGS \
|
|
"nandroot=ubi0:rootfs rw\0" \
|
|
"nandrootfstype=ubifs\0" \
|
|
"nandargs=setenv bootargs console=${console} " \
|
|
"root=${nandroot} " \
|
|
"rootfstype=${nandrootfstype} " \
|
|
"ubi.mtd=${rootfs_name}\0" \
|
|
"nandboot=echo Booting from nand ...; " \
|
|
"run nandargs; " \
|
|
"nboot ${loadaddr} nand0 900000; " \
|
|
"bootm ${loadaddr}\0"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"loadaddr=82000000\0" \
|
|
"console=ttyO0,115200n8\0" \
|
|
"rootfs_name=rootfs\0" \
|
|
"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
|
|
"bootscript=echo Running bootscript from mmc ...; " \
|
|
"source ${loadaddr}\0" \
|
|
"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
|
|
MMCARGS \
|
|
NANDARGS
|
|
|
|
/* Serial console configuration */
|
|
|
|
/* NS16550 Configuration */
|
|
#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */
|
|
#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
|
|
|
|
/* I2C Configuration */
|
|
|
|
/* SPL */
|
|
|
|
/* Network. */
|
|
|
|
/* NAND support */
|
|
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
|
|
10, 11, 12, 13, 14, 15, 16, 17, \
|
|
18, 19, 20, 21, 22, 23, 24, 25, \
|
|
26, 27, 28, 29, 30, 31, 32, 33, \
|
|
34, 35, 36, 37, 38, 39, 40, 41, \
|
|
42, 43, 44, 45, 46, 47, 48, 49, \
|
|
50, 51, 52, 53, 54, 55, 56, 57, }
|
|
|
|
#define CONFIG_SYS_NAND_ECCSIZE 512
|
|
#define CONFIG_SYS_NAND_ECCBYTES 14
|
|
|
|
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
|
|
|
|
/* GPIO pin + bank to pin ID mapping */
|
|
#define GPIO_PIN(_bank, _pin) ((_bank << 5) + _pin)
|
|
|
|
/* Status LED */
|
|
/* Status LED polarity is inversed, so init it in the "off" state */
|
|
|
|
/* EEPROM */
|
|
|
|
/*
|
|
* Enable PCA9555 at I2C0-0x26.
|
|
* First select the I2C0 bus with "i2c dev 0", then use "pca953x" command.
|
|
*/
|
|
#define CONFIG_PCA953X
|
|
#define CONFIG_SYS_I2C_PCA953X_ADDR 0x26
|
|
#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x26, 16} }
|
|
|
|
#endif /* __CONFIG_CM_T335_H */
|