u-boot/board/birdland/bav335x
Tom Rini 6f6b7cfa89 Convert all of CONFIG_CONS_INDEX to Kconfig
This converts the following to Kconfig:
   CONFIG_CONS_INDEX

We have existing entries for this option in a number of places, with
different guards on them.  They're also sometimes used for things not
directly inside of the serial driver.  First, introduce a new symbol to
guard the use of CONFIG_CONS_INDEX, so that in the case where we don't
need this for the serial driver, but for some other use, we can still do
it.  Next, consolidate all of these into the single entry in
drivers/serial/Kconfig.  Finally, introduce CONS_INDEX_[023456] so that
we can imply a correct value here to make the defconfig side of this
smaller.

Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Rework a lot of the logic here, such that I took authorship from
Adam, but kept his S-o-B line]
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-16 10:28:52 -04:00
..
board.c spl: Kconfig: Rename SPL_USBETH_SUPPORT to SPL_USB_ETHER to match with the U-boot CONFIG 2018-03-05 10:06:05 -05:00
board.h bav335x: Update defconfigs and fix typo in EEPROM config format 2015-03-24 10:56:35 -04:00
Kconfig Convert all of CONFIG_CONS_INDEX to Kconfig 2018-03-16 10:28:52 -04:00
MAINTAINERS Adding Support for BAV335x boards 2015-03-05 20:13:21 -05:00
Makefile Various Makefiles: Add SPDX-License-Identifier tags 2015-11-10 09:19:52 -05:00
mux.c Adding Support for BAV335x boards 2015-03-05 20:13:21 -05:00
README Adding Support for BAV335x boards 2015-03-05 20:13:21 -05:00
u-boot.lds Adding Support for BAV335x boards 2015-03-05 20:13:21 -05:00

Summary
=======

This document covers various features of the 'BAV335x' board build.
For more information about this board, visit http://birdland.com/oem


Hardware
========

The binary produced supports the bav335x Rev.A with 10/100 MB PHY
and Rev.B (default) with GB ethernet PHY.
If the BAV335x EEPROM is populated and programmed, the board will
automatically detect the version and extract proper serial# and
mac address from the EE.


Customization
=============

The following blocks are required:
- I2C, to talk with the PMIC and ensure that we do not run afoul of
  errata 1.0.24.

When removing options as part of customization,
CONFIG_EXTRA_ENV_SETTINGS will need additional care to update for your
needs and to remove no longer relevant options as in some cases we
define additional text blocks (such as for NAND or DFU strings).  Also
note that all of the SPL options are grouped together, rather than with
the IP blocks, so both areas will need their choices updated to reflect
the custom design.