Peter Tyser 009884ae35 pci: Use intelligent indentation for CONFIG_PCI_SCAN_SHOW ... When CONFIG_PCI_SCAN_SHOW is defined U-Boot prints out PCI devices as they are found during bootup, eg: PCIE1: connected as Root Complex 01:00.0 - 10b5:8518 - Bridge device 02:01.0 - 10b5:8518 - Bridge device 03:00.0 - 10b5:8112 - Bridge device 04:01.0 - 8086:1010 - Network controller 04:01.1 - 8086:1010 - Network controller 02:02.0 - 10b5:8518 - Bridge device 02:03.0 - 10b5:8518 - Bridge device 06:00.0 - 10b5:8518 - Bridge device 07:00.0 - 10b5:8518 - Bridge device 08:00.0 - 1957:0040 - Processor 07:01.0 - 10b5:8518 - Bridge device 09:00.0 - 10b5:8112 - Bridge device 07:02.0 - 10b5:8518 - Bridge device PCIE1: Bus 00 - 0b PCIE2: connected as Root Complex 0d:00.0 - 1957:0040 - Processor PCIE2: Bus 0c - 0d This information is useful, but its difficult to determine the PCI bus topology. To things clearer, we can use indention to make it more obvious how the PCI bus is organized. For the example above, the updated output with this change is: PCIE1: connected as Root Complex 01:00.0 - 10b5:8518 - Bridge device 02:01.0 - 10b5:8518 - Bridge device 03:00.0 - 10b5:8112 - Bridge device 04:01.0 - 8086:1010 - Network controller 04:01.1 - 8086:1010 - Network controller 02:02.0 - 10b5:8518 - Bridge device 02:03.0 - 10b5:8518 - Bridge device 06:00.0 - 10b5:8518 - Bridge device 07:00.0 - 10b5:8518 - Bridge device 08:00.0 - 1957:0040 - Processor 07:01.0 - 10b5:8518 - Bridge device 09:00.0 - 10b5:8112 - Bridge device 07:02.0 - 10b5:8518 - Bridge device PCIE1: Bus 00 - 0b PCIE2: connected as Root Complex 0d:00.0 - 1957:0040 - Processor PCIE2: Bus 0c - 0d In the examples above, an MPC8640 is connected to a PEX8518 PCIe switch (01:00 and 02:0x), which is connected to another PEX8518 PCIe switch (06:00 and 07:0x), which then connects to a MPC8572 processor (08:00). Also, the MPC8640's PEX8518 PCIe switch is connected to a PCI ethernet card (04:01) via a PEX8112 PCIe-to-PCI bridge (03:00). Signed-off-by: Peter Tyser <ptyser@xes-inc.com>		2010-11-14 23:46:48 +01:00
..
bios_emulator	ati_radeon: Support PCI virtual not eq bus mapping.	2010-04-08 15:30:47 +02:00
block	mvsata_ide: adjust port init sequence	2010-10-13 09:35:54 +02:00
dma	powerpc/8xxx: Fix dma for 36bit addressing	2010-08-31 11:23:15 -05:00
fpga	Coding Style cleanup	2010-10-27 22:48:30 +02:00
gpio	Use common function to set GPIOs for MX3 and MX5	2010-09-29 11:24:30 +02:00
hwmon	ds1621: Fix negative temperature readings	2010-10-06 23:01:22 +02:00
i2c	Merge branch 'master' of git://git.denx.de/u-boot-samsung	2010-10-29 21:47:48 +02:00
input	Remove HMI10 board support	2010-09-19 21:28:25 +02:00
misc	Merge branch 'master' of git://git.denx.de/u-boot-arm	2010-10-13 20:59:47 +02:00
mmc	Merge branch 'master' of git://git.denx.de/u-boot-samsung	2010-10-29 21:47:48 +02:00
mtd	sf: ramtron: new spi fram driver	2010-11-10 04:26:18 -05:00
net	net: e1000: Add initialized eth_device & e1000_hw structure	2010-11-14 23:24:37 +01:00
pci	pci: Use intelligent indentation for CONFIG_PCI_SCAN_SHOW	2010-11-14 23:46:48 +01:00
pcmcia	Remove HMI10 board support	2010-09-19 21:28:25 +02:00
power	Prepare v2010.09-rc1	2010-09-10 00:16:19 +02:00
qe	powerpc/fsl: Introduce common enum for PHY types	2010-10-20 02:27:18 -05:00
rtc	Merge branch 'master' of git://git.denx.de/u-boot-samsung	2010-10-29 21:47:48 +02:00
serial	Merge branch 'master' of git://git.denx.de/u-boot-samsung	2010-10-29 21:47:48 +02:00
spi	Merge branch 'master' of git://git.denx.de/u-boot-imx	2010-10-11 10:19:04 +02:00
twserial	drivers/twserial: Add protocol driver for "three wire serial" interface.	2009-03-30 09:38:36 +02:00
usb	Coding Style cleanup	2010-10-27 22:48:30 +02:00
video	MX51: Add video support	2010-10-22 00:05:05 +02:00
watchdog	Convert at91 watchdog driver to new SoC access	2010-04-03 15:24:27 -05:00