mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 17:07:38 +00:00
0ef326b5e9
FriendlyARM NanoPi R5S is an open-sourced mini IoT gateway device. Board Specifications - Rockchip RK3568 - 2 or 4GB LPDDR4X - 8GB or 16GB eMMC, SD card slot - GbE LAN (Native) - 2x 2.5G LAN (PCIe) - M.2 Connector - HDMI 2.0, MIPI DSI/CSI - 2xUSB 3.0 Host - USB Type C PD, 5V/9V/12V - GPIO: 12-pin 0.5mm FPC connector The device tree is taken from kernel v6.4-rc1. Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Tianling Shen <cnsztl@gmail.com>
136 lines
2.9 KiB
Text
136 lines
2.9 KiB
Text
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
/*
|
|
* Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
|
|
* (http://www.friendlyelec.com)
|
|
*
|
|
* Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "rk3568-nanopi-r5s.dtsi"
|
|
|
|
/ {
|
|
model = "FriendlyElec NanoPi R5S";
|
|
compatible = "friendlyarm,nanopi-r5s", "rockchip,rk3568";
|
|
|
|
aliases {
|
|
ethernet0 = &gmac0;
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lan1_led_pin>, <&lan2_led_pin>, <&power_led_pin>, <&wan_led_pin>;
|
|
|
|
led-lan1 {
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_LAN;
|
|
function-enumerator = <1>;
|
|
gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
led-lan2 {
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_LAN;
|
|
function-enumerator = <2>;
|
|
gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
power_led: led-power {
|
|
color = <LED_COLOR_ID_RED>;
|
|
function = LED_FUNCTION_POWER;
|
|
linux,default-trigger = "heartbeat";
|
|
gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
led-wan {
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_WAN;
|
|
gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&gmac0 {
|
|
assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
|
|
assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
|
|
assigned-clock-rates = <0>, <125000000>;
|
|
clock_in_out = "output";
|
|
phy-handle = <&rgmii_phy0>;
|
|
phy-mode = "rgmii";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gmac0_miim
|
|
&gmac0_tx_bus2
|
|
&gmac0_rx_bus2
|
|
&gmac0_rgmii_clk
|
|
&gmac0_rgmii_bus>;
|
|
snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
|
|
snps,reset-active-low;
|
|
/* Reset time is 15ms, 50ms for rtl8211f */
|
|
snps,reset-delays-us = <0 15000 50000>;
|
|
tx_delay = <0x3c>;
|
|
rx_delay = <0x2f>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mdio0 {
|
|
rgmii_phy0: ethernet-phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <1>;
|
|
pinctrl-0 = <ð_phy0_reset_pin>;
|
|
pinctrl-names = "default";
|
|
};
|
|
};
|
|
|
|
&pcie2x1 {
|
|
num-lanes = <1>;
|
|
reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie30phy {
|
|
data-lanes = <1 2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie3x1 {
|
|
num-lanes = <1>;
|
|
reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
|
vpcie3v3-supply = <&vcc3v3_pcie>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie3x2 {
|
|
num-lanes = <1>;
|
|
num-ib-windows = <8>;
|
|
num-ob-windows = <8>;
|
|
reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
|
|
vpcie3v3-supply = <&vcc3v3_pcie>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
gmac0 {
|
|
eth_phy0_reset_pin: eth-phy0-reset-pin {
|
|
rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
gpio-leds {
|
|
lan1_led_pin: lan1-led-pin {
|
|
rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
lan2_led_pin: lan2-led-pin {
|
|
rockchip,pins = <3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
power_led_pin: power-led-pin {
|
|
rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
wan_led_pin: wan-led-pin {
|
|
rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|