mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
280 lines
7.5 KiB
C
280 lines
7.5 KiB
C
/*
|
|
* (C) Copyright 2001
|
|
* Erik Theisen, Wave 7 Optics, etheisen@mindspring.com.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include "w7o.h"
|
|
#include <asm/processor.h>
|
|
|
|
#include "vpd.h"
|
|
#include "errors.h"
|
|
#include <watchdog.h>
|
|
|
|
unsigned long get_dram_size (void);
|
|
void sdram_init(void);
|
|
|
|
/*
|
|
* Macros to transform values
|
|
* into environment strings.
|
|
*/
|
|
#define XMK_STR(x) #x
|
|
#define MK_STR(x) XMK_STR(x)
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
int board_early_init_f (void)
|
|
{
|
|
#if defined(CONFIG_W7OLMG)
|
|
/*
|
|
* Setup GPIO pins - reset devices.
|
|
*/
|
|
out32 (PPC405GP_GPIO0_ODR, 0x10000000); /* one open drain pin */
|
|
out32 (PPC405GP_GPIO0_OR, 0x3E000000); /* set output pins to default */
|
|
out32 (PPC405GP_GPIO0_TCR, 0x7f800000); /* setup for output */
|
|
|
|
/*
|
|
* IRQ 0-15 405GP internally generated; active high; level sensitive
|
|
* IRQ 16 405GP internally generated; active low; level sensitive
|
|
* IRQ 17-24 RESERVED
|
|
* IRQ 25 (EXT IRQ 0) XILINX; active low; level sensitive
|
|
* IRQ 26 (EXT IRQ 1) PCI INT A; active low; level sensitive
|
|
* IRQ 27 (EXT IRQ 2) PCI INT B; active low; level sensitive
|
|
* IRQ 28 (EXT IRQ 3) SAM 2; active low; level sensitive
|
|
* IRQ 29 (EXT IRQ 4) Battery Bad; active low; level sensitive
|
|
* IRQ 30 (EXT IRQ 5) Level One PHY; active low; level sensitive
|
|
* IRQ 31 (EXT IRQ 6) SAM 1; active high; level sensitive
|
|
*/
|
|
mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
|
|
mtdcr (uicer, 0x00000000); /* disable all ints */
|
|
|
|
mtdcr (uiccr, 0x00000000); /* set all to be non-critical */
|
|
mtdcr (uicpr, 0xFFFFFF80); /* set int polarities */
|
|
mtdcr (uictr, 0x10000000); /* set int trigger levels */
|
|
mtdcr (uicvcr, 0x00000001); /* set vect base=0,
|
|
INT0 highest priority */
|
|
|
|
mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
|
|
|
|
#elif defined(CONFIG_W7OLMC)
|
|
/*
|
|
* Setup GPIO pins
|
|
*/
|
|
out32 (PPC405GP_GPIO0_ODR, 0x01800000); /* XCV Done Open Drain */
|
|
out32 (PPC405GP_GPIO0_OR, 0x03800000); /* set out pins to default */
|
|
out32 (PPC405GP_GPIO0_TCR, 0x66C00000); /* setup for output */
|
|
|
|
/*
|
|
* IRQ 0-15 405GP internally generated; active high; level sensitive
|
|
* IRQ 16 405GP internally generated; active low; level sensitive
|
|
* IRQ 17-24 RESERVED
|
|
* IRQ 25 (EXT IRQ 0) DBE 0; active low; level sensitive
|
|
* IRQ 26 (EXT IRQ 1) DBE 1; active low; level sensitive
|
|
* IRQ 27 (EXT IRQ 2) DBE 2; active low; level sensitive
|
|
* IRQ 28 (EXT IRQ 3) DBE Common; active low; level sensitive
|
|
* IRQ 29 (EXT IRQ 4) PCI; active low; level sensitive
|
|
* IRQ 30 (EXT IRQ 5) RCMM Reset; active low; level sensitive
|
|
* IRQ 31 (EXT IRQ 6) PHY; active high; level sensitive
|
|
*/
|
|
mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
|
|
mtdcr (uicer, 0x00000000); /* disable all ints */
|
|
|
|
mtdcr (uiccr, 0x00000000); /* set all to be non-critical */
|
|
mtdcr (uicpr, 0xFFFFFF80); /* set int polarities */
|
|
mtdcr (uictr, 0x10000000); /* set int trigger levels */
|
|
mtdcr (uicvcr, 0x00000001); /* set vect base=0,
|
|
INT0 highest priority */
|
|
|
|
mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
|
|
|
|
#else /* Unknown */
|
|
# error "Unknown W7O board configuration"
|
|
#endif
|
|
|
|
WATCHDOG_RESET (); /* Reset the watchdog */
|
|
temp_uart_init (); /* init the uart for debug */
|
|
WATCHDOG_RESET (); /* Reset the watchdog */
|
|
test_led (); /* test the LEDs */
|
|
test_sdram (get_dram_size ()); /* test the dram */
|
|
log_stat (ERR_POST1); /* log status,post1 complete */
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* Check Board Identity:
|
|
*/
|
|
int checkboard (void)
|
|
{
|
|
VPD vpd;
|
|
|
|
puts ("Board: ");
|
|
|
|
/* VPD data present in I2C EEPROM */
|
|
if (vpd_get_data (CONFIG_SYS_DEF_EEPROM_ADDR, &vpd) == 0) {
|
|
/*
|
|
* Known board type.
|
|
*/
|
|
if (vpd.productId[0] &&
|
|
((strncmp (vpd.productId, "GMM", 3) == 0) ||
|
|
(strncmp (vpd.productId, "CMM", 3) == 0))) {
|
|
|
|
/* Output board information on startup */
|
|
printf ("\"%s\", revision '%c', serial# %ld, manufacturer %u\n", vpd.productId, vpd.revisionId, vpd.serialNum, vpd.manuID);
|
|
return (0);
|
|
}
|
|
}
|
|
|
|
puts ("### Unknown HW ID - assuming NOTHING\n");
|
|
return (0);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
phys_size_t initdram (int board_type)
|
|
{
|
|
/*
|
|
* ToDo: Move the asm init routine sdram_init() to this C file,
|
|
* or even better use some common ppc4xx code available
|
|
* in cpu/ppc4xx
|
|
*/
|
|
sdram_init();
|
|
|
|
return get_dram_size ();
|
|
}
|
|
|
|
unsigned long get_dram_size (void)
|
|
{
|
|
int tmp, i, regs[4];
|
|
int size = 0;
|
|
|
|
/* Get bank Size registers */
|
|
mtdcr (memcfga, mem_mb0cf); /* get bank 0 config reg */
|
|
regs[0] = mfdcr (memcfgd);
|
|
|
|
mtdcr (memcfga, mem_mb1cf); /* get bank 1 config reg */
|
|
regs[1] = mfdcr (memcfgd);
|
|
|
|
mtdcr (memcfga, mem_mb2cf); /* get bank 2 config reg */
|
|
regs[2] = mfdcr (memcfgd);
|
|
|
|
mtdcr (memcfga, mem_mb3cf); /* get bank 3 config reg */
|
|
regs[3] = mfdcr (memcfgd);
|
|
|
|
/* compute the size, add each bank if enabled */
|
|
for (i = 0; i < 4; i++) {
|
|
if (regs[i] & 0x0001) { /* if enabled, */
|
|
tmp = ((regs[i] >> (31 - 14)) & 0x7); /* get size bits */
|
|
tmp = 0x400000 << tmp; /* Size bits X 4MB = size */
|
|
size += tmp;
|
|
}
|
|
}
|
|
|
|
return size;
|
|
}
|
|
|
|
int misc_init_f (void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void w7o_env_init (VPD * vpd)
|
|
{
|
|
/*
|
|
* Read VPD
|
|
*/
|
|
if (vpd_get_data (CONFIG_SYS_DEF_EEPROM_ADDR, vpd) != 0)
|
|
return;
|
|
|
|
/*
|
|
* Known board type.
|
|
*/
|
|
if (vpd->productId[0] &&
|
|
((strncmp (vpd->productId, "GMM", 3) == 0) ||
|
|
(strncmp (vpd->productId, "CMM", 3) == 0))) {
|
|
char buf[30];
|
|
char *eth;
|
|
char *serial = getenv ("serial#");
|
|
char *ethaddr = getenv ("ethaddr");
|
|
|
|
/* Set 'serial#' envvar if serial# isn't set */
|
|
if (!serial) {
|
|
sprintf (buf, "%s-%ld", vpd->productId,
|
|
vpd->serialNum);
|
|
setenv ("serial#", buf);
|
|
}
|
|
|
|
/* Set 'ethaddr' envvar if 'ethaddr' envvar is the default */
|
|
eth = (char *)(vpd->ethAddrs[0]);
|
|
if (ethaddr
|
|
&& (strcmp (ethaddr, MK_STR (CONFIG_ETHADDR)) == 0)) {
|
|
/* Now setup ethaddr */
|
|
sprintf (buf, "%02x:%02x:%02x:%02x:%02x:%02x",
|
|
eth[0], eth[1], eth[2], eth[3], eth[4],
|
|
eth[5]);
|
|
setenv ("ethaddr", buf);
|
|
}
|
|
}
|
|
} /* w7o_env_init() */
|
|
|
|
|
|
int misc_init_r (void)
|
|
{
|
|
VPD vpd; /* VPD information */
|
|
|
|
#if defined(CONFIG_W7OLMG)
|
|
unsigned long greg; /* GPIO Register */
|
|
|
|
greg = in32 (PPC405GP_GPIO0_OR);
|
|
|
|
/*
|
|
* XXX - Unreset devices - this should be moved into VxWorks driver code
|
|
*/
|
|
greg |= 0x41800000L; /* SAM, PHY, Galileo */
|
|
|
|
out32 (PPC405GP_GPIO0_OR, greg); /* set output pins to default */
|
|
#endif /* CONFIG_W7OLMG */
|
|
|
|
/*
|
|
* Initialize W7O environment variables
|
|
*/
|
|
w7o_env_init (&vpd);
|
|
|
|
/*
|
|
* Initialize the FPGA(s).
|
|
*/
|
|
if (init_fpga () == 0)
|
|
test_fpga ((unsigned short *) CONFIG_FPGAS_BASE);
|
|
|
|
/* More POST testing. */
|
|
post2 ();
|
|
|
|
/* Done with hardware initialization and POST. */
|
|
log_stat (ERR_POSTOK);
|
|
|
|
/* Call silly, fail safe boot init routine */
|
|
init_fsboot ();
|
|
|
|
return (0);
|
|
}
|