mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
abe66b1b5d
This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE Most of time these value are not needed, CONFIG_SF_DEFAULT with same value is used, so I introduced CONFIG_USE_ENV_SPI_* to force the associated value for the environment. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
780 lines
25 KiB
C
780 lines
25 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright 2010-2011 Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
/*
|
|
* P010 RDB board configuration file
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include <asm/config_mpc85xx.h>
|
|
#define CONFIG_NAND_FSL_IFC
|
|
|
|
#ifdef CONFIG_SDCARD
|
|
#define CONFIG_SPL_FLUSH_IMAGE
|
|
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
|
|
#define CONFIG_SPL_TEXT_BASE 0xD0001000
|
|
#define CONFIG_SPL_PAD_TO 0x18000
|
|
#define CONFIG_SPL_MAX_SIZE (96 * 1024)
|
|
#define CONFIG_SYS_MMC_U_BOOT_SIZE (512 << 10)
|
|
#define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000)
|
|
#define CONFIG_SYS_MMC_U_BOOT_START (0x11000000)
|
|
#define CONFIG_SYS_MMC_U_BOOT_OFFS (96 << 10)
|
|
#define CONFIG_SYS_MPC85XX_NO_RESETVEC
|
|
#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds"
|
|
#define CONFIG_SPL_MMC_BOOT
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define CONFIG_SPL_COMMON_INIT_DDR
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef CONFIG_SPIFLASH
|
|
#ifdef CONFIG_SECURE_BOOT
|
|
#define CONFIG_RAMBOOT_SPIFLASH
|
|
#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc
|
|
#else
|
|
#define CONFIG_SPL_SPI_FLASH_MINIMAL
|
|
#define CONFIG_SPL_FLUSH_IMAGE
|
|
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
|
|
#define CONFIG_SPL_TEXT_BASE 0xD0001000
|
|
#define CONFIG_SPL_PAD_TO 0x18000
|
|
#define CONFIG_SPL_MAX_SIZE (96 * 1024)
|
|
#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (512 << 10)
|
|
#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000)
|
|
#define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000)
|
|
#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (96 << 10)
|
|
#define CONFIG_SYS_MPC85XX_NO_RESETVEC
|
|
#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds"
|
|
#define CONFIG_SPL_SPI_BOOT
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define CONFIG_SPL_COMMON_INIT_DDR
|
|
#endif
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef CONFIG_NAND
|
|
#ifdef CONFIG_SECURE_BOOT
|
|
#define CONFIG_SPL_INIT_MINIMAL
|
|
#define CONFIG_SPL_NAND_BOOT
|
|
#define CONFIG_SPL_FLUSH_IMAGE
|
|
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
|
|
|
|
#define CONFIG_SPL_TEXT_BASE 0xFFFFE000
|
|
#define CONFIG_SPL_MAX_SIZE 8192
|
|
#define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000
|
|
#define CONFIG_SPL_RELOC_STACK 0x00100000
|
|
#define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000)
|
|
#define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE)
|
|
#define CONFIG_SYS_NAND_U_BOOT_START 0x00200000
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0
|
|
#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
|
|
#else
|
|
#ifdef CONFIG_TPL_BUILD
|
|
#define CONFIG_SPL_NAND_BOOT
|
|
#define CONFIG_SPL_FLUSH_IMAGE
|
|
#define CONFIG_SPL_NAND_INIT
|
|
#define CONFIG_SPL_COMMON_INIT_DDR
|
|
#define CONFIG_SPL_MAX_SIZE (128 << 10)
|
|
#define CONFIG_TPL_TEXT_BASE 0xD0001000
|
|
#define CONFIG_SYS_MPC85XX_NO_RESETVEC
|
|
#define CONFIG_SYS_NAND_U_BOOT_SIZE (576 << 10)
|
|
#define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000)
|
|
#define CONFIG_SYS_NAND_U_BOOT_START (0x11000000)
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10)
|
|
#elif defined(CONFIG_SPL_BUILD)
|
|
#define CONFIG_SPL_INIT_MINIMAL
|
|
#define CONFIG_SPL_NAND_MINIMAL
|
|
#define CONFIG_SPL_FLUSH_IMAGE
|
|
#define CONFIG_SPL_TEXT_BASE 0xff800000
|
|
#define CONFIG_SPL_MAX_SIZE 8192
|
|
#define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10)
|
|
#define CONFIG_SYS_NAND_U_BOOT_DST 0xD0000000
|
|
#define CONFIG_SYS_NAND_U_BOOT_START 0xD0000000
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10)
|
|
#endif
|
|
#define CONFIG_SPL_PAD_TO 0x20000
|
|
#define CONFIG_TPL_PAD_TO 0x20000
|
|
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
|
|
#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef CONFIG_NAND_SECBOOT /* NAND Boot */
|
|
#define CONFIG_RAMBOOT_NAND
|
|
#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc
|
|
#endif
|
|
|
|
#ifndef CONFIG_RESET_VECTOR_ADDRESS
|
|
#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
|
|
#endif
|
|
|
|
#ifdef CONFIG_TPL_BUILD
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_TPL_TEXT_BASE
|
|
#elif defined(CONFIG_SPL_BUILD)
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
|
|
#else
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
|
|
#endif
|
|
|
|
/* High Level Configuration Options */
|
|
#define CONFIG_SYS_HAS_SERDES /* common SERDES init code */
|
|
|
|
#if defined(CONFIG_PCI)
|
|
#define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */
|
|
#define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */
|
|
#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
|
|
#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
|
|
#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */
|
|
#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
|
|
|
|
/*
|
|
* PCI Windows
|
|
* Memory space is mapped 1-1, but I/O space must start from 0.
|
|
*/
|
|
/* controller 1, Slot 1, tgtid 1, Base address a000 */
|
|
#define CONFIG_SYS_PCIE1_NAME "mini PCIe Slot"
|
|
#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
|
|
#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
|
|
#else
|
|
#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
|
|
#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000
|
|
#endif
|
|
#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
|
|
#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000
|
|
#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
|
|
#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull
|
|
#else
|
|
#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000
|
|
#endif
|
|
|
|
/* controller 2, Slot 2, tgtid 2, Base address 9000 */
|
|
#if defined(CONFIG_TARGET_P1010RDB_PA)
|
|
#define CONFIG_SYS_PCIE2_NAME "PCIe Slot"
|
|
#elif defined(CONFIG_TARGET_P1010RDB_PB)
|
|
#define CONFIG_SYS_PCIE2_NAME "mini PCIe Slot"
|
|
#endif
|
|
#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000
|
|
#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull
|
|
#else
|
|
#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
|
|
#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000
|
|
#endif
|
|
#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
|
|
#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000
|
|
#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
|
|
#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull
|
|
#else
|
|
#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000
|
|
#endif
|
|
|
|
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
|
|
#endif
|
|
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_DDR_CLK_FREQ 66666666 /* DDRCLK on P1010 RDB */
|
|
#define CONFIG_SYS_CLK_FREQ 66666666 /* SYSCLK for P1010 RDB */
|
|
|
|
#define CONFIG_HWCONFIG
|
|
/*
|
|
* These can be toggled for performance analysis, otherwise use default.
|
|
*/
|
|
#define CONFIG_L2_CACHE /* toggle L2 cache */
|
|
#define CONFIG_BTB /* toggle branch predition */
|
|
|
|
|
|
#define CONFIG_ENABLE_36BIT_PHYS
|
|
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_ADDR_MAP 1
|
|
#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */
|
|
#endif
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END 0x1fffffff
|
|
|
|
/* DDR Setup */
|
|
#define CONFIG_SYS_DDR_RAW_TIMING
|
|
#define CONFIG_DDR_SPD
|
|
#define CONFIG_SYS_SPD_BUS_NUM 1
|
|
#define SPD_EEPROM_ADDRESS 0x52
|
|
|
|
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
|
|
|
|
#ifndef __ASSEMBLY__
|
|
extern unsigned long get_sdram_size(void);
|
|
#endif
|
|
#define CONFIG_SYS_SDRAM_SIZE get_sdram_size() /* DDR size */
|
|
#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
|
|
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
|
|
|
|
#define CONFIG_DIMM_SLOTS_PER_CTLR 1
|
|
#define CONFIG_CHIP_SELECTS_PER_CTRL 1
|
|
|
|
/* DDR3 Controller Settings */
|
|
#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f
|
|
#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302
|
|
#define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000
|
|
#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef
|
|
#define CONFIG_SYS_DDR_INIT_ADDR 0x00000000
|
|
#define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000
|
|
#define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000
|
|
#define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600
|
|
#define CONFIG_SYS_DDR_SR_CNTR 0x00000000
|
|
#define CONFIG_SYS_DDR_RCW_1 0x00000000
|
|
#define CONFIG_SYS_DDR_RCW_2 0x00000000
|
|
#define CONFIG_SYS_DDR_CONTROL 0xc70c0008 /* Type = DDR3 */
|
|
#define CONFIG_SYS_DDR_CONTROL_2 0x24401000
|
|
#define CONFIG_SYS_DDR_TIMING_4 0x00000001
|
|
#define CONFIG_SYS_DDR_TIMING_5 0x03402400
|
|
|
|
#define CONFIG_SYS_DDR_TIMING_3_800 0x00030000
|
|
#define CONFIG_SYS_DDR_TIMING_0_800 0x00110104
|
|
#define CONFIG_SYS_DDR_TIMING_1_800 0x6f6b8644
|
|
#define CONFIG_SYS_DDR_TIMING_2_800 0x0FA888CF
|
|
#define CONFIG_SYS_DDR_CLK_CTRL_800 0x03000000
|
|
#define CONFIG_SYS_DDR_MODE_1_800 0x00441420
|
|
#define CONFIG_SYS_DDR_MODE_2_800 0x00000000
|
|
#define CONFIG_SYS_DDR_INTERVAL_800 0x0C300100
|
|
#define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8675f608
|
|
|
|
/* settings for DDR3 at 667MT/s */
|
|
#define CONFIG_SYS_DDR_TIMING_3_667 0x00010000
|
|
#define CONFIG_SYS_DDR_TIMING_0_667 0x00110004
|
|
#define CONFIG_SYS_DDR_TIMING_1_667 0x5d59e544
|
|
#define CONFIG_SYS_DDR_TIMING_2_667 0x0FA890CD
|
|
#define CONFIG_SYS_DDR_CLK_CTRL_667 0x03000000
|
|
#define CONFIG_SYS_DDR_MODE_1_667 0x00441210
|
|
#define CONFIG_SYS_DDR_MODE_2_667 0x00000000
|
|
#define CONFIG_SYS_DDR_INTERVAL_667 0x0a280000
|
|
#define CONFIG_SYS_DDR_WRLVL_CONTROL_667 0x8675F608
|
|
|
|
#define CONFIG_SYS_CCSRBAR 0xffe00000
|
|
#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
|
|
|
|
/* Don't relocate CCSRBAR while in NAND_SPL */
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
|
|
#endif
|
|
|
|
/*
|
|
* Memory map
|
|
*
|
|
* 0x0000_0000 0x3fff_ffff DDR 1G cacheable
|
|
* 0x8000_0000 0xbfff_ffff PCI Express Mem 1.5G non-cacheable
|
|
* 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable
|
|
*
|
|
* Localbus non-cacheable
|
|
* 0xff80_0000 0xff8f_ffff NAND Flash 1M non-cacheable
|
|
* 0xffb0_0000 0xffbf_ffff Board CPLD 1M non-cacheable
|
|
* 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0
|
|
* 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable
|
|
*/
|
|
|
|
/*
|
|
* IFC Definitions
|
|
*/
|
|
/* NOR Flash on IFC */
|
|
|
|
#define CONFIG_SYS_FLASH_BASE 0xee000000
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 256 /* 32M */
|
|
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
|
|
#else
|
|
#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
|
|
#endif
|
|
|
|
#define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
|
|
CSPR_PORT_SIZE_16 | \
|
|
CSPR_MSEL_NOR | \
|
|
CSPR_V)
|
|
#define CONFIG_SYS_NOR_AMASK IFC_AMASK(32*1024*1024)
|
|
#define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(7)
|
|
/* NOR Flash Timing Params */
|
|
#define CONFIG_SYS_NOR_FTIM0 FTIM0_NOR_TACSE(0x4) | \
|
|
FTIM0_NOR_TEADC(0x5) | \
|
|
FTIM0_NOR_TEAHC(0x5)
|
|
#define CONFIG_SYS_NOR_FTIM1 FTIM1_NOR_TACO(0x1e) | \
|
|
FTIM1_NOR_TRAD_NOR(0x0f)
|
|
#define CONFIG_SYS_NOR_FTIM2 FTIM2_NOR_TCS(0x4) | \
|
|
FTIM2_NOR_TCH(0x4) | \
|
|
FTIM2_NOR_TWP(0x1c)
|
|
#define CONFIG_SYS_NOR_FTIM3 0x0
|
|
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS}
|
|
#define CONFIG_SYS_FLASH_QUIET_TEST
|
|
#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
|
|
|
|
#undef CONFIG_SYS_FLASH_CHECKSUM
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
|
|
|
|
/* CFI for NOR Flash */
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO
|
|
|
|
/* NAND Flash on IFC */
|
|
#define CONFIG_SYS_NAND_BASE 0xff800000
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull
|
|
#else
|
|
#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
|
|
#endif
|
|
|
|
#define CONFIG_MTD_PARTITION
|
|
|
|
#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
|
|
| CSPR_PORT_SIZE_8 \
|
|
| CSPR_MSEL_NAND \
|
|
| CSPR_V)
|
|
#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024)
|
|
|
|
#if defined(CONFIG_TARGET_P1010RDB_PA)
|
|
#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
|
|
| CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
|
|
| CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
|
|
| CSOR_NAND_RAL_2 /* RAL = 2 Bytes */ \
|
|
| CSOR_NAND_PGS_512 /* Page Size = 512b */ \
|
|
| CSOR_NAND_SPRZ_16 /* Spare size = 16 */ \
|
|
| CSOR_NAND_PB(32)) /* 32 Pages Per Block */
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024)
|
|
|
|
#elif defined(CONFIG_TARGET_P1010RDB_PB)
|
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
|
#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
|
|
| CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
|
|
| CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
|
|
| CSOR_NAND_RAL_3 /* RAL = 3Byes */ \
|
|
| CSOR_NAND_PGS_4K /* Page Size = 4K */ \
|
|
| CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \
|
|
| CSOR_NAND_PB(128)) /*Pages Per Block = 128 */
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024)
|
|
#endif
|
|
|
|
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
|
|
#if defined(CONFIG_TARGET_P1010RDB_PA)
|
|
/* NAND Flash Timing Params */
|
|
#define CONFIG_SYS_NAND_FTIM0 FTIM0_NAND_TCCST(0x01) | \
|
|
FTIM0_NAND_TWP(0x0C) | \
|
|
FTIM0_NAND_TWCHT(0x04) | \
|
|
FTIM0_NAND_TWH(0x05)
|
|
#define CONFIG_SYS_NAND_FTIM1 FTIM1_NAND_TADLE(0x1d) | \
|
|
FTIM1_NAND_TWBE(0x1d) | \
|
|
FTIM1_NAND_TRR(0x07) | \
|
|
FTIM1_NAND_TRP(0x0c)
|
|
#define CONFIG_SYS_NAND_FTIM2 FTIM2_NAND_TRAD(0x0c) | \
|
|
FTIM2_NAND_TREH(0x05) | \
|
|
FTIM2_NAND_TWHRE(0x0f)
|
|
#define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x04)
|
|
|
|
#elif defined(CONFIG_TARGET_P1010RDB_PB)
|
|
/* support MT29F16G08ABABAWP 4k-pagesize 2G-bytes NAND */
|
|
/* ONFI NAND Flash mode0 Timing Params */
|
|
#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07)| \
|
|
FTIM0_NAND_TWP(0x18) | \
|
|
FTIM0_NAND_TWCHT(0x07) | \
|
|
FTIM0_NAND_TWH(0x0a))
|
|
#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32)| \
|
|
FTIM1_NAND_TWBE(0x39) | \
|
|
FTIM1_NAND_TRR(0x0e) | \
|
|
FTIM1_NAND_TRP(0x18))
|
|
#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \
|
|
FTIM2_NAND_TREH(0x0a) | \
|
|
FTIM2_NAND_TWHRE(0x1e))
|
|
#define CONFIG_SYS_NAND_FTIM3 0x0
|
|
#endif
|
|
|
|
#define CONFIG_SYS_NAND_DDR_LAW 11
|
|
|
|
/* Set up IFC registers for boot location NOR/NAND */
|
|
#if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT)
|
|
#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
|
|
#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
|
|
#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
|
|
#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
|
|
#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
|
|
#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
|
|
#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
|
|
#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR
|
|
#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK
|
|
#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
|
|
#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
|
|
#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
|
|
#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
|
|
#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
|
|
#else
|
|
#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR
|
|
#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
|
|
#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
|
|
#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
|
|
#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
|
|
#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
|
|
#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
|
|
#define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR
|
|
#define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK
|
|
#define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR
|
|
#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0
|
|
#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1
|
|
#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2
|
|
#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3
|
|
#endif
|
|
|
|
/* CPLD on IFC */
|
|
#define CONFIG_SYS_CPLD_BASE 0xffb00000
|
|
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
#define CONFIG_SYS_CPLD_BASE_PHYS 0xfffb00000ull
|
|
#else
|
|
#define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE
|
|
#endif
|
|
|
|
#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
|
|
| CSPR_PORT_SIZE_8 \
|
|
| CSPR_MSEL_GPCM \
|
|
| CSPR_V)
|
|
#define CONFIG_SYS_AMASK3 IFC_AMASK(64*1024)
|
|
#define CONFIG_SYS_CSOR3 0x0
|
|
/* CPLD Timing parameters for IFC CS3 */
|
|
#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \
|
|
FTIM0_GPCM_TEADC(0x0e) | \
|
|
FTIM0_GPCM_TEAHC(0x0e))
|
|
#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \
|
|
FTIM1_GPCM_TRAD(0x1f))
|
|
#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \
|
|
FTIM2_GPCM_TCH(0x8) | \
|
|
FTIM2_GPCM_TWP(0x1f))
|
|
#define CONFIG_SYS_CS3_FTIM3 0x0
|
|
|
|
#if defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH) || \
|
|
defined(CONFIG_RAMBOOT_NAND)
|
|
#define CONFIG_SYS_RAMBOOT
|
|
#else
|
|
#undef CONFIG_SYS_RAMBOOT
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399
|
|
#if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT)
|
|
#define CONFIG_A003399_NOR_WORKAROUND
|
|
#endif
|
|
#endif
|
|
|
|
#define CONFIG_SYS_INIT_RAM_LOCK
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* End of used area in RAM */
|
|
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \
|
|
- GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
|
|
#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
|
|
#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc*/
|
|
|
|
/*
|
|
* Config the L2 Cache as L2 SRAM
|
|
*/
|
|
#if defined(CONFIG_SPL_BUILD)
|
|
#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
|
|
#define CONFIG_SYS_INIT_L2_ADDR 0xD0000000
|
|
#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
|
|
#define CONFIG_SYS_L2_SIZE (256 << 10)
|
|
#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
|
|
#define CONFIG_SPL_RELOC_TEXT_BASE 0xD0001000
|
|
#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
|
|
#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024)
|
|
#define CONFIG_SPL_RELOC_MALLOC_SIZE (128 << 10)
|
|
#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 96 * 1024)
|
|
#elif defined(CONFIG_NAND)
|
|
#ifdef CONFIG_TPL_BUILD
|
|
#define CONFIG_SYS_INIT_L2_ADDR 0xD0000000
|
|
#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
|
|
#define CONFIG_SYS_L2_SIZE (256 << 10)
|
|
#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
|
|
#define CONFIG_SPL_RELOC_TEXT_BASE 0xD0001000
|
|
#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
|
|
#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
|
|
#define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10)
|
|
#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
|
|
#else
|
|
#define CONFIG_SYS_INIT_L2_ADDR 0xD0000000
|
|
#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
|
|
#define CONFIG_SYS_L2_SIZE (256 << 10)
|
|
#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
|
|
#define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x3000)
|
|
#define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
|
|
#endif
|
|
#endif
|
|
#endif
|
|
|
|
/* Serial Port */
|
|
#undef CONFIG_SERIAL_SOFTWARE_FIFO
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE 1
|
|
#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
|
|
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
|
|
#define CONFIG_NS16550_MIN_FUNCTIONS
|
|
#endif
|
|
|
|
#define CONFIG_SYS_BAUDRATE_TABLE \
|
|
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
|
|
|
|
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
|
|
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
|
|
|
|
/* I2C */
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_FSL
|
|
#define CONFIG_SYS_FSL_I2C_SPEED 400000
|
|
#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
|
|
#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
|
|
#define CONFIG_SYS_FSL_I2C2_SPEED 400000
|
|
#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
|
|
#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
|
|
#define I2C_PCA9557_ADDR1 0x18
|
|
#define I2C_PCA9557_ADDR2 0x19
|
|
#define I2C_PCA9557_BUS_NUM 0
|
|
|
|
/* I2C EEPROM */
|
|
#if defined(CONFIG_TARGET_P1010RDB_PB)
|
|
#define CONFIG_ID_EEPROM
|
|
#ifdef CONFIG_ID_EEPROM
|
|
#define CONFIG_SYS_I2C_EEPROM_NXID
|
|
#endif
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
|
|
#define CONFIG_SYS_EEPROM_BUS_NUM 0
|
|
#define MAX_NUM_PORTS 9 /* for 128Bytes EEPROM */
|
|
#endif
|
|
/* enable read and write access to EEPROM */
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
|
|
|
|
/* RTC */
|
|
#define CONFIG_RTC_PT7C4338
|
|
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
|
|
|
|
/*
|
|
* SPI interface will not be available in case of NAND boot SPI CS0 will be
|
|
* used for SLIC
|
|
*/
|
|
#if !defined(CONFIG_NAND) || !defined(CONFIG_NAND_SECBOOT)
|
|
/* eSPI - Enhanced SPI */
|
|
#endif
|
|
|
|
#if defined(CONFIG_TSEC_ENET)
|
|
#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
|
|
#define CONFIG_TSEC1 1
|
|
#define CONFIG_TSEC1_NAME "eTSEC1"
|
|
#define CONFIG_TSEC2 1
|
|
#define CONFIG_TSEC2_NAME "eTSEC2"
|
|
#define CONFIG_TSEC3 1
|
|
#define CONFIG_TSEC3_NAME "eTSEC3"
|
|
|
|
#define TSEC1_PHY_ADDR 1
|
|
#define TSEC2_PHY_ADDR 0
|
|
#define TSEC3_PHY_ADDR 2
|
|
|
|
#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
|
|
#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
|
|
#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
|
|
|
|
#define TSEC1_PHYIDX 0
|
|
#define TSEC2_PHYIDX 0
|
|
#define TSEC3_PHYIDX 0
|
|
|
|
#define CONFIG_ETHPRIME "eTSEC1"
|
|
|
|
/* TBI PHY configuration for SGMII mode */
|
|
#define CONFIG_TSEC_TBICR_SETTINGS ( \
|
|
TBICR_PHY_RESET \
|
|
| TBICR_ANEG_ENABLE \
|
|
| TBICR_FULL_DUPLEX \
|
|
| TBICR_SPEED1_SET \
|
|
)
|
|
|
|
#endif /* CONFIG_TSEC_ENET */
|
|
|
|
/* SATA */
|
|
#define CONFIG_FSL_SATA_V2
|
|
|
|
#ifdef CONFIG_FSL_SATA
|
|
#define CONFIG_SYS_SATA_MAX_DEVICE 2
|
|
#define CONFIG_SATA1
|
|
#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
|
|
#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
|
|
#define CONFIG_SATA2
|
|
#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR
|
|
#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
|
|
|
|
#define CONFIG_LBA48
|
|
#endif /* #ifdef CONFIG_FSL_SATA */
|
|
|
|
#ifdef CONFIG_MMC
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
|
|
#endif
|
|
|
|
#define CONFIG_HAS_FSL_DR_USB
|
|
|
|
#if defined(CONFIG_HAS_FSL_DR_USB)
|
|
#ifdef CONFIG_USB_EHCI_HCD
|
|
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
|
|
#define CONFIG_USB_EHCI_FSL
|
|
#endif
|
|
#endif
|
|
|
|
/*
|
|
* Environment
|
|
*/
|
|
#if defined(CONFIG_SDCARD)
|
|
#define CONFIG_FSL_FIXED_MMC_LOCATION
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0
|
|
#define CONFIG_ENV_SIZE 0x2000
|
|
#elif defined(CONFIG_SPIFLASH)
|
|
#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
|
|
#define CONFIG_ENV_SECT_SIZE 0x10000
|
|
#define CONFIG_ENV_SIZE 0x2000
|
|
#elif defined(CONFIG_NAND)
|
|
#ifdef CONFIG_TPL_BUILD
|
|
#define CONFIG_ENV_SIZE 0x2000
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
|
|
#else
|
|
#if defined(CONFIG_TARGET_P1010RDB_PA)
|
|
#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
|
|
#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) /* 3*16=48K for env */
|
|
#elif defined(CONFIG_TARGET_P1010RDB_PB)
|
|
#define CONFIG_ENV_SIZE (16 * 1024)
|
|
#define CONFIG_ENV_RANGE (32 * CONFIG_ENV_SIZE) /* new block size 512K */
|
|
#endif
|
|
#endif
|
|
#define CONFIG_ENV_OFFSET (1024 * 1024)
|
|
#elif defined(CONFIG_SYS_RAMBOOT)
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
|
|
#define CONFIG_ENV_SIZE 0x2000
|
|
#else
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
|
|
#define CONFIG_ENV_SIZE 0x2000
|
|
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
|
|
#endif
|
|
|
|
#define CONFIG_LOADS_ECHO /* echo on for serial download */
|
|
#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
|
|
|
|
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
|
|
|
#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI_HCD) \
|
|
|| defined(CONFIG_FSL_SATA)
|
|
#endif
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 64 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */
|
|
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
|
|
#endif
|
|
|
|
/*
|
|
* Environment Configuration
|
|
*/
|
|
|
|
#if defined(CONFIG_TSEC_ENET)
|
|
#define CONFIG_HAS_ETH0
|
|
#define CONFIG_HAS_ETH1
|
|
#define CONFIG_HAS_ETH2
|
|
#endif
|
|
|
|
#define CONFIG_ROOTPATH "/opt/nfsroot"
|
|
#define CONFIG_BOOTFILE "uImage"
|
|
#define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */
|
|
|
|
/* default location for tftp and bootm */
|
|
#define CONFIG_LOADADDR 1000000
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"hwconfig=" __stringify(CONFIG_DEF_HWCONFIG) "\0" \
|
|
"netdev=eth0\0" \
|
|
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
|
|
"loadaddr=1000000\0" \
|
|
"consoledev=ttyS0\0" \
|
|
"ramdiskaddr=2000000\0" \
|
|
"ramdiskfile=rootfs.ext2.gz.uboot\0" \
|
|
"fdtaddr=1e00000\0" \
|
|
"fdtfile=p1010rdb.dtb\0" \
|
|
"bdev=sda1\0" \
|
|
"hwconfig=usb1:dr_mode=host,phy_type=utmi\0" \
|
|
"othbootargs=ramdisk_size=600000\0" \
|
|
"usbfatboot=setenv bootargs root=/dev/ram rw " \
|
|
"console=$consoledev,$baudrate $othbootargs; " \
|
|
"usb start;" \
|
|
"fatload usb 0:2 $loadaddr $bootfile;" \
|
|
"fatload usb 0:2 $fdtaddr $fdtfile;" \
|
|
"fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \
|
|
"bootm $loadaddr $ramdiskaddr $fdtaddr\0" \
|
|
"usbext2boot=setenv bootargs root=/dev/ram rw " \
|
|
"console=$consoledev,$baudrate $othbootargs; " \
|
|
"usb start;" \
|
|
"ext2load usb 0:4 $loadaddr $bootfile;" \
|
|
"ext2load usb 0:4 $fdtaddr $fdtfile;" \
|
|
"ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
|
|
"bootm $loadaddr $ramdiskaddr $fdtaddr\0" \
|
|
CONFIG_BOOTMODE
|
|
|
|
#if defined(CONFIG_TARGET_P1010RDB_PA)
|
|
#define CONFIG_BOOTMODE \
|
|
"boot_bank0=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
|
|
"mw.b ffb00011 0; mw.b ffb00009 0; reset\0" \
|
|
"boot_bank1=i2c dev 0; i2c mw 18 1 f1; i2c mw 18 3 f0;" \
|
|
"mw.b ffb00011 0; mw.b ffb00009 1; reset\0" \
|
|
"boot_nand=i2c dev 0; i2c mw 18 1 f9; i2c mw 18 3 f0;" \
|
|
"mw.b ffb00011 0; mw.b ffb00017 1; reset\0"
|
|
|
|
#elif defined(CONFIG_TARGET_P1010RDB_PB)
|
|
#define CONFIG_BOOTMODE \
|
|
"boot_bank0=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
|
|
"i2c mw 19 1 2; i2c mw 19 3 e1; reset\0" \
|
|
"boot_bank1=i2c dev 0; i2c mw 18 1 fe; i2c mw 18 3 0;" \
|
|
"i2c mw 19 1 12; i2c mw 19 3 e1; reset\0" \
|
|
"boot_nand=i2c dev 0; i2c mw 18 1 fc; i2c mw 18 3 0;" \
|
|
"i2c mw 19 1 8; i2c mw 19 3 f7; reset\0" \
|
|
"boot_spi=i2c dev 0; i2c mw 18 1 fa; i2c mw 18 3 0;" \
|
|
"i2c mw 19 1 0; i2c mw 19 3 f7; reset\0" \
|
|
"boot_sd=i2c dev 0; i2c mw 18 1 f8; i2c mw 18 3 0;" \
|
|
"i2c mw 19 1 4; i2c mw 19 3 f3; reset\0"
|
|
#endif
|
|
|
|
#define CONFIG_RAMBOOTCOMMAND \
|
|
"setenv bootargs root=/dev/ram rw " \
|
|
"console=$consoledev,$baudrate $othbootargs; " \
|
|
"tftp $ramdiskaddr $ramdiskfile;" \
|
|
"tftp $loadaddr $bootfile;" \
|
|
"tftp $fdtaddr $fdtfile;" \
|
|
"bootm $loadaddr $ramdiskaddr $fdtaddr"
|
|
|
|
#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
|
|
|
|
#include <asm/fsl_secure_boot.h>
|
|
|
|
#endif /* __CONFIG_H */
|