mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 15:37:23 +00:00
741280e9ac
Currently, when different spi slaves claim the bus consecutively using
spi_claim_bus(), spi_set_speed_mode() will only be executed on the first
two calls, leaving the bus in a bad state starting with the third call.
This patch drops spi_slave->speed member and adds caching of bus
speed/mode in dm_spi_bus struct. It also updates spi_claim_bus() to call
spi_set_speed_mode() if either speed or mode is different from what the
bus is currently configured for. Current behavior is to only take into
account the speed, but not the mode, which seems wrong.
Fixes: 60e2809a84
("dm: spi: Avoid setting the speed with every transfer")
Reviewed-by: Simon Glass <sjg@chromium.org>
Reported-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reported-by: Moshe, Yaniv <yanivmo@amazon.com>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
472 lines
11 KiB
C
472 lines
11 KiB
C
/*
|
|
* generic mmc spi driver
|
|
*
|
|
* Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw>
|
|
* Copyright 2019 Bhargav Shah <bhargavshah1988@gmail.com>
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
#include <common.h>
|
|
#include <errno.h>
|
|
#include <log.h>
|
|
#include <malloc.h>
|
|
#include <part.h>
|
|
#include <mmc.h>
|
|
#include <stdlib.h>
|
|
#include <linux/bitops.h>
|
|
#include <u-boot/crc.h>
|
|
#include <linux/crc7.h>
|
|
#include <asm/byteorder.h>
|
|
#include <dm.h>
|
|
#include <spi.h>
|
|
|
|
/* MMC/SD in SPI mode reports R1 status always */
|
|
#define R1_SPI_IDLE BIT(0)
|
|
#define R1_SPI_ERASE_RESET BIT(1)
|
|
#define R1_SPI_ILLEGAL_COMMAND BIT(2)
|
|
#define R1_SPI_COM_CRC BIT(3)
|
|
#define R1_SPI_ERASE_SEQ BIT(4)
|
|
#define R1_SPI_ADDRESS BIT(5)
|
|
#define R1_SPI_PARAMETER BIT(6)
|
|
/* R1 bit 7 is always zero, reuse this bit for error */
|
|
#define R1_SPI_ERROR BIT(7)
|
|
|
|
/* Response tokens used to ack each block written: */
|
|
#define SPI_MMC_RESPONSE_CODE(x) ((x) & 0x1f)
|
|
#define SPI_RESPONSE_ACCEPTED ((2 << 1)|1)
|
|
#define SPI_RESPONSE_CRC_ERR ((5 << 1)|1)
|
|
#define SPI_RESPONSE_WRITE_ERR ((6 << 1)|1)
|
|
|
|
/* Read and write blocks start with these tokens and end with crc;
|
|
* on error, read tokens act like a subset of R2_SPI_* values.
|
|
*/
|
|
/* single block write multiblock read */
|
|
#define SPI_TOKEN_SINGLE 0xfe
|
|
/* multiblock write */
|
|
#define SPI_TOKEN_MULTI_WRITE 0xfc
|
|
/* terminate multiblock write */
|
|
#define SPI_TOKEN_STOP_TRAN 0xfd
|
|
|
|
/* MMC SPI commands start with a start bit "0" and a transmit bit "1" */
|
|
#define MMC_SPI_CMD(x) (0x40 | (x))
|
|
|
|
/* bus capability */
|
|
#define MMC_SPI_VOLTAGE (MMC_VDD_32_33 | MMC_VDD_33_34)
|
|
#define MMC_SPI_MIN_CLOCK 400000 /* 400KHz to meet MMC spec */
|
|
#define MMC_SPI_MAX_CLOCK 25000000 /* SD/MMC legacy speed */
|
|
|
|
/* timeout value */
|
|
#define CMD_TIMEOUT 8
|
|
#define READ_TIMEOUT 3000000 /* 1 sec */
|
|
#define WRITE_TIMEOUT 3000000 /* 1 sec */
|
|
#define R1B_TIMEOUT 3000000 /* 1 sec */
|
|
|
|
struct mmc_spi_plat {
|
|
struct mmc_config cfg;
|
|
struct mmc mmc;
|
|
};
|
|
|
|
struct mmc_spi_priv {
|
|
struct spi_slave *spi;
|
|
};
|
|
|
|
static int mmc_spi_sendcmd(struct udevice *dev,
|
|
ushort cmdidx, u32 cmdarg, u32 resp_type,
|
|
u8 *resp, u32 resp_size,
|
|
bool resp_match, u8 resp_match_value, bool r1b)
|
|
{
|
|
int i, rpos = 0, ret = 0;
|
|
u8 cmdo[7], r;
|
|
|
|
debug("%s: cmd%d cmdarg=0x%x resp_type=0x%x "
|
|
"resp_size=%d resp_match=%d resp_match_value=0x%x\n",
|
|
__func__, cmdidx, cmdarg, resp_type,
|
|
resp_size, resp_match, resp_match_value);
|
|
|
|
cmdo[0] = 0xff;
|
|
cmdo[1] = MMC_SPI_CMD(cmdidx);
|
|
cmdo[2] = cmdarg >> 24;
|
|
cmdo[3] = cmdarg >> 16;
|
|
cmdo[4] = cmdarg >> 8;
|
|
cmdo[5] = cmdarg;
|
|
cmdo[6] = (crc7(0, &cmdo[1], 5) << 1) | 0x01;
|
|
ret = dm_spi_xfer(dev, sizeof(cmdo) * 8, cmdo, NULL, SPI_XFER_BEGIN);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = dm_spi_xfer(dev, 1 * 8, NULL, &r, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!resp || !resp_size)
|
|
return 0;
|
|
|
|
debug("%s: cmd%d", __func__, cmdidx);
|
|
|
|
if (resp_match) {
|
|
r = ~resp_match_value;
|
|
i = CMD_TIMEOUT;
|
|
while (i) {
|
|
ret = dm_spi_xfer(dev, 1 * 8, NULL, &r, 0);
|
|
if (ret)
|
|
return ret;
|
|
debug(" resp%d=0x%x", rpos, r);
|
|
rpos++;
|
|
i--;
|
|
|
|
if (r == resp_match_value)
|
|
break;
|
|
}
|
|
if (!i && (r != resp_match_value))
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
for (i = 0; i < resp_size; i++) {
|
|
if (i == 0 && resp_match) {
|
|
resp[i] = resp_match_value;
|
|
continue;
|
|
}
|
|
ret = dm_spi_xfer(dev, 1 * 8, NULL, &r, 0);
|
|
if (ret)
|
|
return ret;
|
|
debug(" resp%d=0x%x", rpos, r);
|
|
rpos++;
|
|
resp[i] = r;
|
|
}
|
|
|
|
if (r1b == true) {
|
|
i = R1B_TIMEOUT;
|
|
while (i) {
|
|
ret = dm_spi_xfer(dev, 1 * 8, NULL, &r, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
debug(" resp%d=0x%x", rpos, r);
|
|
rpos++;
|
|
i--;
|
|
|
|
if (r)
|
|
break;
|
|
}
|
|
if (!i)
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
debug("\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmc_spi_readdata(struct udevice *dev,
|
|
void *xbuf, u32 bcnt, u32 bsize)
|
|
{
|
|
u16 crc;
|
|
u8 *buf = xbuf, r1;
|
|
int i, ret = 0;
|
|
|
|
while (bcnt--) {
|
|
for (i = 0; i < READ_TIMEOUT; i++) {
|
|
ret = dm_spi_xfer(dev, 1 * 8, NULL, &r1, 0);
|
|
if (ret)
|
|
return ret;
|
|
if (r1 == SPI_TOKEN_SINGLE)
|
|
break;
|
|
}
|
|
debug("%s: data tok%d 0x%x\n", __func__, i, r1);
|
|
if (r1 == SPI_TOKEN_SINGLE) {
|
|
ret = dm_spi_xfer(dev, bsize * 8, NULL, buf, 0);
|
|
if (ret)
|
|
return ret;
|
|
ret = dm_spi_xfer(dev, 2 * 8, NULL, &crc, 0);
|
|
if (ret)
|
|
return ret;
|
|
#ifdef CONFIG_MMC_SPI_CRC_ON
|
|
if (be16_to_cpu(crc16_ccitt(0, buf, bsize)) != crc) {
|
|
debug("%s: data crc error\n", __func__);
|
|
r1 = R1_SPI_COM_CRC;
|
|
break;
|
|
}
|
|
#endif
|
|
r1 = 0;
|
|
} else {
|
|
r1 = R1_SPI_ERROR;
|
|
break;
|
|
}
|
|
buf += bsize;
|
|
}
|
|
|
|
if (r1 & R1_SPI_COM_CRC)
|
|
ret = -ECOMM;
|
|
else if (r1) /* other errors */
|
|
ret = -ETIMEDOUT;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mmc_spi_writedata(struct udevice *dev, const void *xbuf,
|
|
u32 bcnt, u32 bsize, int multi)
|
|
{
|
|
const u8 *buf = xbuf;
|
|
u8 r1, tok[2];
|
|
u16 crc;
|
|
int i, ret = 0;
|
|
|
|
tok[0] = 0xff;
|
|
tok[1] = multi ? SPI_TOKEN_MULTI_WRITE : SPI_TOKEN_SINGLE;
|
|
|
|
while (bcnt--) {
|
|
#ifdef CONFIG_MMC_SPI_CRC_ON
|
|
crc = cpu_to_be16(crc16_ccitt(0, (u8 *)buf, bsize));
|
|
#endif
|
|
dm_spi_xfer(dev, 2 * 8, tok, NULL, 0);
|
|
dm_spi_xfer(dev, bsize * 8, buf, NULL, 0);
|
|
dm_spi_xfer(dev, 2 * 8, &crc, NULL, 0);
|
|
for (i = 0; i < CMD_TIMEOUT; i++) {
|
|
dm_spi_xfer(dev, 1 * 8, NULL, &r1, 0);
|
|
if ((r1 & 0x10) == 0) /* response token */
|
|
break;
|
|
}
|
|
debug("%s: data tok%d 0x%x\n", __func__, i, r1);
|
|
if (SPI_MMC_RESPONSE_CODE(r1) == SPI_RESPONSE_ACCEPTED) {
|
|
debug("%s: data accepted\n", __func__);
|
|
for (i = 0; i < WRITE_TIMEOUT; i++) { /* wait busy */
|
|
dm_spi_xfer(dev, 1 * 8, NULL, &r1, 0);
|
|
if (i && r1 == 0xff) {
|
|
r1 = 0;
|
|
break;
|
|
}
|
|
}
|
|
if (i == WRITE_TIMEOUT) {
|
|
debug("%s: data write timeout 0x%x\n",
|
|
__func__, r1);
|
|
r1 = R1_SPI_ERROR;
|
|
break;
|
|
}
|
|
} else {
|
|
debug("%s: data error 0x%x\n", __func__, r1);
|
|
r1 = R1_SPI_COM_CRC;
|
|
break;
|
|
}
|
|
buf += bsize;
|
|
}
|
|
if (multi && bcnt == -1) { /* stop multi write */
|
|
tok[1] = SPI_TOKEN_STOP_TRAN;
|
|
dm_spi_xfer(dev, 2 * 8, tok, NULL, 0);
|
|
for (i = 0; i < WRITE_TIMEOUT; i++) { /* wait busy */
|
|
dm_spi_xfer(dev, 1 * 8, NULL, &r1, 0);
|
|
if (i && r1 == 0xff) {
|
|
r1 = 0;
|
|
break;
|
|
}
|
|
}
|
|
if (i == WRITE_TIMEOUT) {
|
|
debug("%s: data write timeout 0x%x\n", __func__, r1);
|
|
r1 = R1_SPI_ERROR;
|
|
}
|
|
}
|
|
|
|
if (r1 & R1_SPI_COM_CRC)
|
|
ret = -ECOMM;
|
|
else if (r1) /* other errors */
|
|
ret = -ETIMEDOUT;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dm_mmc_spi_set_ios(struct udevice *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int dm_mmc_spi_request(struct udevice *dev, struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
int i, multi, ret = 0;
|
|
u8 *resp = NULL;
|
|
u32 resp_size = 0;
|
|
bool resp_match = false, r1b = false;
|
|
u8 resp8 = 0, resp16[2] = { 0 }, resp40[5] = { 0 }, resp_match_value = 0;
|
|
|
|
dm_spi_claim_bus(dev);
|
|
|
|
for (i = 0; i < 4; i++)
|
|
cmd->response[i] = 0;
|
|
|
|
switch (cmd->cmdidx) {
|
|
case SD_CMD_APP_SEND_OP_COND:
|
|
case MMC_CMD_SEND_OP_COND:
|
|
resp = &resp8;
|
|
resp_size = sizeof(resp8);
|
|
cmd->cmdarg = 0x40000000;
|
|
break;
|
|
case SD_CMD_SEND_IF_COND:
|
|
resp = (u8 *)&resp40[0];
|
|
resp_size = sizeof(resp40);
|
|
resp_match = true;
|
|
resp_match_value = R1_SPI_IDLE;
|
|
break;
|
|
case MMC_CMD_SPI_READ_OCR:
|
|
resp = (u8 *)&resp40[0];
|
|
resp_size = sizeof(resp40);
|
|
break;
|
|
case MMC_CMD_SEND_STATUS:
|
|
resp = (u8 *)&resp16[0];
|
|
resp_size = sizeof(resp16);
|
|
break;
|
|
case MMC_CMD_SET_BLOCKLEN:
|
|
case MMC_CMD_SPI_CRC_ON_OFF:
|
|
resp = &resp8;
|
|
resp_size = sizeof(resp8);
|
|
resp_match = true;
|
|
resp_match_value = 0x0;
|
|
break;
|
|
case MMC_CMD_STOP_TRANSMISSION:
|
|
case MMC_CMD_ERASE:
|
|
resp = &resp8;
|
|
resp_size = sizeof(resp8);
|
|
r1b = true;
|
|
break;
|
|
case MMC_CMD_SEND_CSD:
|
|
case MMC_CMD_SEND_CID:
|
|
case MMC_CMD_READ_SINGLE_BLOCK:
|
|
case MMC_CMD_READ_MULTIPLE_BLOCK:
|
|
case MMC_CMD_WRITE_SINGLE_BLOCK:
|
|
case MMC_CMD_WRITE_MULTIPLE_BLOCK:
|
|
case MMC_CMD_APP_CMD:
|
|
case SD_CMD_ERASE_WR_BLK_START:
|
|
case SD_CMD_ERASE_WR_BLK_END:
|
|
resp = &resp8;
|
|
resp_size = sizeof(resp8);
|
|
break;
|
|
default:
|
|
resp = &resp8;
|
|
resp_size = sizeof(resp8);
|
|
resp_match = true;
|
|
resp_match_value = R1_SPI_IDLE;
|
|
break;
|
|
};
|
|
|
|
ret = mmc_spi_sendcmd(dev, cmd->cmdidx, cmd->cmdarg, cmd->resp_type,
|
|
resp, resp_size, resp_match, resp_match_value, r1b);
|
|
if (ret)
|
|
goto done;
|
|
|
|
switch (cmd->cmdidx) {
|
|
case SD_CMD_APP_SEND_OP_COND:
|
|
case MMC_CMD_SEND_OP_COND:
|
|
cmd->response[0] = (resp8 & R1_SPI_IDLE) ? 0 : OCR_BUSY;
|
|
break;
|
|
case SD_CMD_SEND_IF_COND:
|
|
case MMC_CMD_SPI_READ_OCR:
|
|
cmd->response[0] = resp40[4];
|
|
cmd->response[0] |= (uint)resp40[3] << 8;
|
|
cmd->response[0] |= (uint)resp40[2] << 16;
|
|
cmd->response[0] |= (uint)resp40[1] << 24;
|
|
break;
|
|
case MMC_CMD_SEND_STATUS:
|
|
if (resp16[0] || resp16[1])
|
|
cmd->response[0] = MMC_STATUS_ERROR;
|
|
else
|
|
cmd->response[0] = MMC_STATUS_RDY_FOR_DATA;
|
|
break;
|
|
case MMC_CMD_SEND_CID:
|
|
case MMC_CMD_SEND_CSD:
|
|
ret = mmc_spi_readdata(dev, cmd->response, 1, 16);
|
|
if (ret)
|
|
return ret;
|
|
for (i = 0; i < 4; i++)
|
|
cmd->response[i] =
|
|
cpu_to_be32(cmd->response[i]);
|
|
break;
|
|
default:
|
|
cmd->response[0] = resp8;
|
|
break;
|
|
}
|
|
|
|
debug("%s: cmd%d resp0=0x%x resp1=0x%x resp2=0x%x resp3=0x%x\n",
|
|
__func__, cmd->cmdidx, cmd->response[0], cmd->response[1],
|
|
cmd->response[2], cmd->response[3]);
|
|
|
|
if (data) {
|
|
debug("%s: data flags=0x%x blocks=%d block_size=%d\n",
|
|
__func__, data->flags, data->blocks, data->blocksize);
|
|
multi = (cmd->cmdidx == MMC_CMD_WRITE_MULTIPLE_BLOCK);
|
|
if (data->flags == MMC_DATA_READ)
|
|
ret = mmc_spi_readdata(dev, data->dest,
|
|
data->blocks, data->blocksize);
|
|
else if (data->flags == MMC_DATA_WRITE)
|
|
ret = mmc_spi_writedata(dev, data->src,
|
|
data->blocks, data->blocksize,
|
|
multi);
|
|
}
|
|
|
|
done:
|
|
dm_spi_xfer(dev, 0, NULL, NULL, SPI_XFER_END);
|
|
|
|
dm_spi_release_bus(dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mmc_spi_probe(struct udevice *dev)
|
|
{
|
|
struct mmc_spi_priv *priv = dev_get_priv(dev);
|
|
struct mmc_spi_plat *plat = dev_get_plat(dev);
|
|
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
|
|
char *name;
|
|
|
|
priv->spi = dev_get_parent_priv(dev);
|
|
if (!priv->spi->max_hz)
|
|
priv->spi->max_hz = MMC_SPI_MAX_CLOCK;
|
|
priv->spi->mode = SPI_MODE_0;
|
|
priv->spi->wordlen = 8;
|
|
|
|
name = malloc(strlen(dev->parent->name) + strlen(dev->name) + 4);
|
|
if (!name)
|
|
return -ENOMEM;
|
|
sprintf(name, "%s:%s", dev->parent->name, dev->name);
|
|
|
|
plat->cfg.name = name;
|
|
plat->cfg.host_caps = MMC_MODE_SPI;
|
|
plat->cfg.voltages = MMC_SPI_VOLTAGE;
|
|
plat->cfg.f_min = MMC_SPI_MIN_CLOCK;
|
|
plat->cfg.f_max = priv->spi->max_hz;
|
|
plat->cfg.part_type = PART_TYPE_DOS;
|
|
plat->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
|
|
|
|
plat->mmc.cfg = &plat->cfg;
|
|
plat->mmc.priv = priv;
|
|
plat->mmc.dev = dev;
|
|
|
|
upriv->mmc = &plat->mmc;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmc_spi_bind(struct udevice *dev)
|
|
{
|
|
struct mmc_spi_plat *plat = dev_get_plat(dev);
|
|
|
|
return mmc_bind(dev, &plat->mmc, &plat->cfg);
|
|
}
|
|
|
|
static const struct dm_mmc_ops mmc_spi_ops = {
|
|
.send_cmd = dm_mmc_spi_request,
|
|
.set_ios = dm_mmc_spi_set_ios,
|
|
};
|
|
|
|
static const struct udevice_id dm_mmc_spi_match[] = {
|
|
{ .compatible = "mmc-spi-slot" },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(mmc_spi) = {
|
|
.name = "mmc_spi",
|
|
.id = UCLASS_MMC,
|
|
.of_match = dm_mmc_spi_match,
|
|
.ops = &mmc_spi_ops,
|
|
.probe = mmc_spi_probe,
|
|
.bind = mmc_spi_bind,
|
|
.plat_auto = sizeof(struct mmc_spi_plat),
|
|
.priv_auto = sizeof(struct mmc_spi_priv),
|
|
};
|