mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 17:58:23 +00:00
48ba1969c1
T210 CBoot is now doing the full pinmux and GPIO init, based on the DTB tables. Remove pinmux/GPIO init tables & code from all T210-based builds below: p2371-2180 aka TX1 p2371-0000 e2220-1170 p2571 Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com>
174 lines
4.1 KiB
C
174 lines
4.1 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2013-2019
|
|
* NVIDIA Corporation <www.nvidia.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <env.h>
|
|
#include <fdtdec.h>
|
|
#include <i2c.h>
|
|
#include <linux/libfdt.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/pinmux.h>
|
|
#include <asm/arch-tegra/cboot.h>
|
|
#include "../p2571/max77620_init.h"
|
|
|
|
void pin_mux_mmc(void)
|
|
{
|
|
struct udevice *dev;
|
|
uchar val;
|
|
int ret;
|
|
|
|
/* Turn on MAX77620 LDO2 to 3.3V for SD card power */
|
|
debug("%s: Set LDO2 for VDDIO_SDMMC_AP power to 3.3V\n", __func__);
|
|
ret = i2c_get_chip_for_busnum(0, MAX77620_I2C_ADDR_7BIT, 1, &dev);
|
|
if (ret) {
|
|
printf("%s: Cannot find MAX77620 I2C chip\n", __func__);
|
|
return;
|
|
}
|
|
/* 0xF2 for 3.3v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
|
|
val = 0xF2;
|
|
ret = dm_i2c_write(dev, MAX77620_CNFG1_L2_REG, &val, 1);
|
|
if (ret)
|
|
printf("i2c_write 0 0x3c 0x27 failed: %d\n", ret);
|
|
|
|
/* Disable LDO4 discharge */
|
|
ret = dm_i2c_read(dev, MAX77620_CNFG2_L4_REG, &val, 1);
|
|
if (ret) {
|
|
printf("i2c_read 0 0x3c 0x2c failed: %d\n", ret);
|
|
} else {
|
|
val &= ~BIT(1); /* ADE */
|
|
ret = dm_i2c_write(dev, MAX77620_CNFG2_L4_REG, &val, 1);
|
|
if (ret)
|
|
printf("i2c_write 0 0x3c 0x2c failed: %d\n", ret);
|
|
}
|
|
|
|
/* Set MBLPD */
|
|
ret = dm_i2c_read(dev, MAX77620_CNFGGLBL1_REG, &val, 1);
|
|
if (ret) {
|
|
printf("i2c_write 0 0x3c 0x00 failed: %d\n", ret);
|
|
} else {
|
|
val |= BIT(6); /* MBLPD */
|
|
ret = dm_i2c_write(dev, MAX77620_CNFGGLBL1_REG, &val, 1);
|
|
if (ret)
|
|
printf("i2c_write 0 0x3c 0x00 failed: %d\n", ret);
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_PCI_TEGRA
|
|
int tegra_pcie_board_init(void)
|
|
{
|
|
struct udevice *dev;
|
|
uchar val;
|
|
int ret;
|
|
|
|
/* Turn on MAX77620 LDO1 to 1.05V for PEX power */
|
|
debug("%s: Set LDO1 for PEX power to 1.05V\n", __func__);
|
|
ret = i2c_get_chip_for_busnum(0, MAX77620_I2C_ADDR_7BIT, 1, &dev);
|
|
if (ret) {
|
|
printf("%s: Cannot find MAX77620 I2C chip\n", __func__);
|
|
return -1;
|
|
}
|
|
/* 0xCA for 1.05v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
|
|
val = 0xCA;
|
|
ret = dm_i2c_write(dev, MAX77620_CNFG1_L1_REG, &val, 1);
|
|
if (ret)
|
|
printf("i2c_write 0 0x3c 0x25 failed: %d\n", ret);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* PCI */
|
|
|
|
static void ft_mac_address_setup(void *fdt)
|
|
{
|
|
const void *cboot_fdt = (const void *)cboot_boot_x0;
|
|
uint8_t mac[ETH_ALEN], local_mac[ETH_ALEN];
|
|
const char *path;
|
|
int offset, err;
|
|
|
|
err = cboot_get_ethaddr(cboot_fdt, local_mac);
|
|
if (err < 0)
|
|
memset(local_mac, 0, ETH_ALEN);
|
|
|
|
path = fdt_get_alias(fdt, "ethernet");
|
|
if (!path)
|
|
return;
|
|
|
|
debug("ethernet alias found: %s\n", path);
|
|
|
|
offset = fdt_path_offset(fdt, path);
|
|
if (offset < 0) {
|
|
printf("ethernet alias points to absent node %s\n", path);
|
|
return;
|
|
}
|
|
|
|
if (is_valid_ethaddr(local_mac)) {
|
|
err = fdt_setprop(fdt, offset, "local-mac-address", local_mac,
|
|
ETH_ALEN);
|
|
if (!err)
|
|
debug("Local MAC address set: %pM\n", local_mac);
|
|
}
|
|
|
|
if (eth_env_get_enetaddr("ethaddr", mac)) {
|
|
if (memcmp(local_mac, mac, ETH_ALEN) != 0) {
|
|
err = fdt_setprop(fdt, offset, "mac-address", mac,
|
|
ETH_ALEN);
|
|
if (!err)
|
|
debug("MAC address set: %pM\n", mac);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int ft_copy_carveout(void *dst, const void *src, const char *node)
|
|
{
|
|
struct fdt_memory fb;
|
|
int err;
|
|
|
|
err = fdtdec_get_carveout(src, node, "memory-region", 0, &fb);
|
|
if (err < 0) {
|
|
if (err != -FDT_ERR_NOTFOUND)
|
|
printf("failed to get carveout for %s: %d\n", node,
|
|
err);
|
|
|
|
return err;
|
|
}
|
|
|
|
err = fdtdec_set_carveout(dst, node, "memory-region", 0, "framebuffer",
|
|
&fb);
|
|
if (err < 0) {
|
|
printf("failed to set carveout for %s: %d\n", node, err);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ft_carveout_setup(void *fdt)
|
|
{
|
|
const void *cboot_fdt = (const void *)cboot_boot_x0;
|
|
static const char * const nodes[] = {
|
|
"/host1x@50000000/dc@54200000",
|
|
"/host1x@50000000/dc@54240000",
|
|
};
|
|
unsigned int i;
|
|
int err;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(nodes); i++) {
|
|
err = ft_copy_carveout(fdt, cboot_fdt, nodes[i]);
|
|
if (err < 0) {
|
|
if (err != -FDT_ERR_NOTFOUND)
|
|
printf("failed to copy carveout for %s: %d\n",
|
|
nodes[i], err);
|
|
continue;
|
|
}
|
|
}
|
|
}
|
|
|
|
int ft_board_setup(void *fdt, bd_t *bd)
|
|
{
|
|
ft_mac_address_setup(fdt);
|
|
ft_carveout_setup(fdt);
|
|
|
|
return 0;
|
|
}
|