mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-13 14:53:06 +00:00
fd211f85cc
Drop the pinmux setup in the board in favor of setting it up in the device tree. Device tree nodes match nodes used for the Linux device tree and are set according to the service manual. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
143 lines
3.6 KiB
Text
143 lines
3.6 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
|
/dts-v1/;
|
|
|
|
#include "tegra30-lg-x3.dtsi"
|
|
|
|
/ {
|
|
model = "LG Optimus Vu";
|
|
compatible = "lge,p895", "nvidia,tegra30";
|
|
|
|
gpio-keys {
|
|
key-volume-up {
|
|
label = "Volume Up";
|
|
gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_UP>;
|
|
};
|
|
};
|
|
|
|
pinmux@70000868 {
|
|
state_default: pinmux {
|
|
/* GNSS UART-B pinmux */
|
|
uartb_cts_rxd {
|
|
nvidia,pins = "uart2_cts_n_pj5",
|
|
"uart2_rxd_pc3";
|
|
nvidia,function = "uartb";
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
uartb_rts_txd {
|
|
nvidia,pins = "uart2_rts_n_pj6",
|
|
"uart2_txd_pc2";
|
|
nvidia,function = "uartb";
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
gps_reset {
|
|
nvidia,pins = "spdif_out_pk5";
|
|
nvidia,function = "spdif";
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
|
|
/* GPIO keys pinmux */
|
|
volume_up {
|
|
nvidia,pins = "gmi_cs7_n_pi6";
|
|
nvidia,function = "gmi";
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
memo_key {
|
|
nvidia,pins = "sdmmc3_dat1_pb6";
|
|
nvidia,function = "rsvd1";
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
|
|
/* Sensors pinmux */
|
|
current_alert_irq {
|
|
nvidia,pins = "spi1_cs0_n_px6";
|
|
nvidia,function = "gmi";
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
|
|
/* Panel pinmux */
|
|
panel_vdd {
|
|
nvidia,pins = "pbb0";
|
|
nvidia,function = "rsvd2";
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
|
|
/* AUDIO pinmux */
|
|
sub_mic_ldo {
|
|
nvidia,pins = "gmi_dqs_pi2";
|
|
nvidia,function = "gmi";
|
|
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
|
|
};
|
|
|
|
/* Modem pinmux */
|
|
usim_detect {
|
|
nvidia,pins = "clk2_out_pw5";
|
|
nvidia,function = "rsvd2";
|
|
nvidia,pull = <TEGRA_PIN_PULL_UP>;
|
|
nvidia,tristate = <TEGRA_PIN_DISABLE>;
|
|
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
|
|
};
|
|
|
|
/* GPIO power/drive control */
|
|
drive_sdmmc4 {
|
|
nvidia,pins = "drive_gma",
|
|
"drive_gmb",
|
|
"drive_gmc",
|
|
"drive_gmd";
|
|
nvidia,pull-down-strength = <9>;
|
|
nvidia,pull-up-strength = <9>;
|
|
nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
|
|
nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
|
|
};
|
|
};
|
|
};
|
|
|
|
panel: panel {
|
|
compatible = "hitachi,tx13d100vm0eaa";
|
|
|
|
reset-gpios = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
|
|
|
|
renesas,gamma = <3>;
|
|
renesas,inversion;
|
|
renesas,contrast;
|
|
|
|
vcc-supply = <&vcc_3v0_lcd>;
|
|
iovcc-supply = <&iovcc_1v8_lcd>;
|
|
|
|
backlight = <&backlight>;
|
|
};
|
|
|
|
vcc_3v0_lcd: regulator-lcd {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_3v0_lcd";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
gpio = <&gpio TEGRA_GPIO(BB, 0) GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
iovcc_1v8_lcd: regulator-lcdvio {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "iovcc_1v8_lcd";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
gpio = <&gpio TEGRA_GPIO(Y, 0) GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
};
|