mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 13:56:30 +00:00
72b3732d24
commit 03f1f78a9b ("spl: fit: Prefer a malloc()'d buffer for loading images")'
changed the way buffer allocation worked for SPL to a more flexible
method.
For venice this caused breakage that is resolved by increasing the size
of CONFIG_SYS_SPL_MALLOC_SIZE as the current FIT slighly exceeds 512KiB.
Additionally remove the unnecessary comment on CONFIG_SPL_BSS_MAX_SIZE
and CONFIG_SYS_SPL_MALLOC_SIZE as the size is obvious from the define.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
125 lines
3.5 KiB
C
125 lines
3.5 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright 2021 Gateworks Corporation
|
|
*/
|
|
|
|
#ifndef __IMX8MM_VENICE_H
|
|
#define __IMX8MM_VENICE_H
|
|
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <linux/sizes.h>
|
|
|
|
#define CONFIG_SPL_MAX_SIZE (148 * 1024)
|
|
#define CONFIG_SYS_MONITOR_LEN SZ_512K
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300
|
|
#define CONFIG_SYS_UBOOT_BASE \
|
|
(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define CONFIG_SPL_STACK 0x920000
|
|
#define CONFIG_SPL_BSS_START_ADDR 0x910000
|
|
#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K
|
|
#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
|
|
#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_1M
|
|
|
|
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
|
|
#define CONFIG_MALLOC_F_ADDR 0x930000
|
|
/* For RAW image gives a error info not panic */
|
|
#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
|
|
|
|
#endif
|
|
|
|
#define MEM_LAYOUT_ENV_SETTINGS \
|
|
"fdt_addr_r=0x44000000\0" \
|
|
"kernel_addr_r=0x42000000\0" \
|
|
"ramdisk_addr_r=0x46400000\0" \
|
|
"scriptaddr=0x46000000\0"
|
|
|
|
/* Link Definitions */
|
|
#define CONFIG_LOADADDR 0x40480000
|
|
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
|
|
|
/* Enable Distro Boot */
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
func(MMC, mmc, 1) \
|
|
func(MMC, mmc, 2) \
|
|
func(DHCP, dhcp, na)
|
|
#include <config_distro_bootcmd.h>
|
|
#undef CONFIG_ISO_PARTITION
|
|
#else
|
|
#define BOOTENV
|
|
#endif
|
|
|
|
/* Initial environment variables */
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
BOOTENV \
|
|
MEM_LAYOUT_ENV_SETTINGS \
|
|
"script=boot.scr\0" \
|
|
"bootm_size=0x10000000\0" \
|
|
"ipaddr=192.168.1.22\0" \
|
|
"serverip=192.168.1.146\0" \
|
|
"dev=2\0" \
|
|
"preboot=gsc wd-disable\0" \
|
|
"console=ttymxc1,115200\0" \
|
|
"update_firmware=" \
|
|
"tftpboot $loadaddr $image && " \
|
|
"setexpr blkcnt $filesize + 0x1ff && " \
|
|
"setexpr blkcnt $blkcnt / 0x200 && " \
|
|
"mmc dev $dev && " \
|
|
"mmc write $loadaddr 0x42 $blkcnt\0" \
|
|
"boot_net=" \
|
|
"tftpboot $kernel_addr_r $image && " \
|
|
"booti $kernel_addr_r - $fdtcontroladdr\0" \
|
|
"update_rootfs=" \
|
|
"tftpboot $loadaddr $image && " \
|
|
"gzwrite mmc $dev $loadaddr $filesize 100000 1000000\0" \
|
|
"update_all=" \
|
|
"tftpboot $loadaddr $image && " \
|
|
"gzwrite mmc $dev $loadaddr $filesize\0" \
|
|
"erase_env=mmc dev $dev; mmc erase 0x7f08 0x40\0"
|
|
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
|
|
#define CONFIG_SYS_INIT_RAM_SIZE SZ_2M
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN SZ_32M
|
|
#define CONFIG_SYS_SDRAM_BASE 0x40000000
|
|
|
|
/* SDRAM configuration */
|
|
#define PHYS_SDRAM 0x40000000
|
|
#define PHYS_SDRAM_SIZE SZ_1G /* 1GB DDR */
|
|
#define CONFIG_SYS_BOOTM_LEN SZ_256M
|
|
|
|
/* UART */
|
|
#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
|
|
|
|
/* Monitor Command Prompt */
|
|
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
|
#define CONFIG_SYS_CBSIZE SZ_2K
|
|
#define CONFIG_SYS_MAXARGS 64
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
|
sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
|
|
/* USDHC */
|
|
#define CONFIG_SYS_FSL_USDHC_NUM 2
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
|
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
|
|
|
|
/* I2C */
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
|
|
/* FEC */
|
|
#define CONFIG_ETHPRIME "eth0"
|
|
#define CONFIG_FEC_XCV_TYPE RGMII
|
|
#define CONFIG_FEC_MXC_PHYADDR 0
|
|
#define FEC_QUIRK_ENET_MAC
|
|
#define IMX_FEC_BASE 0x30BE0000
|
|
|
|
#endif
|