u-boot/include/configs/imx8mn_venice.h
Tom Rini 439cc7fb05 Finish converting CONFIG_BOOTM_NETBSD et al to Kconfig
This converts the following to Kconfig:
   CONFIG_BOOTM_NETBSD
   CONFIG_BOOTM_RTEMS
   CONFIG_DESIGNWARE_WATCHDOG
   CONFIG_DISPLAY_CPUINFO
   CONFIG_DM_ETH
   CONFIG_DM_MMC
   CONFIG_DM_REGULATOR
   CONFIG_DM_SPI
   CONFIG_DM_SPI_FLASH
   CONFIG_ISO_PARTITION
   CONFIG_OF_SEPARATE
   CONFIG_SPI_FLASH_WINBOND
   CONFIG_SPL_ETH
   CONFIG_TIMER
   CONFIG_USB_DWC3
   CONFIG_USB_DWC3_GADGET
   CONFIG_USB_DWC3_OMAP
   CONFIG_USB_DWC3_PHY_OMAP
   CONFIG_USB_EHCI_TEGRA
   CONFIG_USB_GADGET_DOWNLOAD
   CONFIG_USB_GADGET_DUALSPEED
   CONFIG_USB_GADGET_MANUFACTURER
   CONFIG_USB_GADGET_PRODUCT_NUM
   CONFIG_USB_GADGET_VBUS_DRAW
   CONFIG_USB_GADGET_VENDOR_NUM

This catches a number of cases where board config files were #undef
various CONFIG options when building SPL, and that doesn't work.  Clean
up the related comments as well.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:45 -04:00

102 lines
2.8 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2022 Gateworks Corporation
*/
#ifndef __IMX8MM_VENICE_H
#define __IMX8MM_VENICE_H
#include <asm/arch/imx-regs.h>
#include <linux/sizes.h>
#define CONFIG_SPL_MAX_SIZE (148 * 1024)
#define CONFIG_SYS_MONITOR_LEN SZ_512K
#define CONFIG_SYS_UBOOT_BASE \
(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SPL_STACK 0x980000
#define CONFIG_SPL_BSS_START_ADDR 0x950000
#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K /* 8 KB */
#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */
/* For RAW image gives a error info not panic */
#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
#endif
#define MEM_LAYOUT_ENV_SETTINGS \
"fdt_addr_r=0x44000000\0" \
"kernel_addr_r=0x42000000\0" \
"ramdisk_addr_r=0x46400000\0" \
"scriptaddr=0x46000000\0"
/* Enable Distro Boot */
#ifndef CONFIG_SPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 1) \
func(MMC, mmc, 2) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
#else
#define BOOTENV
#endif
/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS \
BOOTENV \
MEM_LAYOUT_ENV_SETTINGS \
"script=boot.scr\0" \
"bootm_size=0x10000000\0" \
"dev=2\0" \
"preboot=gsc wd-disable\0" \
"console=ttymxc1,115200\0" \
"update_firmware=" \
"tftpboot $loadaddr $image && " \
"setexpr blkcnt $filesize + 0x1ff && " \
"setexpr blkcnt $blkcnt / 0x200 && " \
"mmc dev $dev && " \
"mmc write $loadaddr 0x40 $blkcnt\0" \
"boot_net=" \
"tftpboot $kernel_addr_r $image && " \
"booti $kernel_addr_r - $fdtcontroladdr\0" \
"update_rootfs=" \
"tftpboot $loadaddr $image && " \
"gzwrite mmc $dev $loadaddr $filesize 100000 1000000\0" \
"update_all=" \
"tftpboot $loadaddr $image && " \
"gzwrite mmc $dev $loadaddr $filesize\0" \
"erase_env=mmc dev $dev; mmc erase 0x7f08 0x40\0"
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
#define CONFIG_SYS_INIT_RAM_SIZE SZ_2M
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
#define CONFIG_SYS_SDRAM_BASE 0x40000000
/* SDRAM configuration */
#define PHYS_SDRAM 0x40000000
#define PHYS_SDRAM_SIZE SZ_1G
#define CONFIG_SYS_BOOTM_LEN SZ_256M
/* UART */
#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE SZ_2K
#define CONFIG_SYS_MAXARGS 64
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
/* USDHC */
#define CONFIG_SYS_FSL_USDHC_NUM 2
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
/* FEC */
#define CONFIG_FEC_MXC_PHYADDR 0
#define FEC_QUIRK_ENET_MAC
#endif