Vitaly Andrianov 89f44bb0ce keystone2: ecc: add ddr3 error detection and correction support ... This patch adds the DDR3 ECC support to enable ECC in the DDR3 EMIF controller for Keystone II devices. By default, ECC will only be enabled if RMW is supported in the DDR EMIF controller. The entire DDR memory will be scrubbed to zero using an EDMA channel after ECC is enabled and before u-boot is re-located to DDR memory. An ecc_test environment variable is added for ECC testing. If ecc_test is set to 0, a detection of 2-bit error will reset the device, if ecc_test is set to 1, 2-bit error detection will not reset the device, user can still boot the kernel to check the ECC error handling in kernel. Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>		2014-10-23 11:27:29 -04:00
..
clock-k2e.c	keystone2: use EFUSE_BOOTROM information to configure PLLs	2014-08-25 10:48:12 -04:00
clock-k2hk.c	keystone2: use EFUSE_BOOTROM information to configure PLLs	2014-08-25 10:48:12 -04:00
clock-k2l.c	keystone2: clock: add K2L clock definitions and commands	2014-10-23 11:27:04 -04:00
clock.c	ARM: keystone: clock: add support for K2E SoCs	2014-10-23 11:27:29 -04:00
cmd_clock.c	ARM: cmd_clock: generalize command usage description	2014-10-23 11:27:04 -04:00
cmd_mon.c	k2hk: add support for k2hk SOC and EVM	2014-04-17 17:24:38 -04:00
ddr3.c	keystone2: ecc: add ddr3 error detection and correction support	2014-10-23 11:27:29 -04:00
init.c	keystone2: enable OSR clock domain for K2L SoC	2014-10-23 11:27:05 -04:00
Kconfig	keystone2: k2l-evm: add board support	2014-10-23 11:27:05 -04:00
keystone.c	k2hk: use common KS2_ prefix for all hardware definitions	2014-07-25 16:26:10 -04:00
Makefile	ARM: keystone2: spl: move board specific code	2014-10-23 11:27:05 -04:00
msmc.c	ARM: keystone: msmc: extend functionality of SES	2014-10-23 11:27:29 -04:00
psc.c	keystone2: use readl/writel functions instead of redefinition	2014-09-04 13:06:00 -04:00