u-boot/board/netstal/hcu4/hcu4.c
Stefan Roese 39ff7d5f4c POST: Remove duplicated post_hotkey_pressed() functions
This patch introduces a weak default function for post_hotkey_pressed(),
returning 0, for boards without hotkey support. The long-running tests
won't be started on those boards. This default function was implemented
in many board directories. By implementing this weak default we can
remove all those duplicate versions.

Boards with hotkey support, can override this weak default function
by defining one in their board specific code.

Signed-off-by: Stefan Roese <sr@denx.de>
2009-12-07 22:44:31 +01:00

198 lines
5 KiB
C

/*
*(C) Copyright 2005-2008 Netstal Maschinen AG
* Niklaus Giger (Niklaus.Giger@netstal.com)
*
* This source code is free software; you can redistribute it
* and/or modify it in source code form under the terms of the GNU
* General Public License as published by the Free Software
* Foundation; either version 2 of the License, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
*/
#include <common.h>
#include <ppc4xx.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm-ppc/u-boot.h>
#include "../common/nm.h"
DECLARE_GLOBAL_DATA_PTR;
#define HCU_MACH_VERSIONS_REGISTER (0x7C000000 + 0xF00000)
#define HCU_SLOT_ADDRESS (0x7C000000 + 0x400000)
#define HCU_DIGITAL_IO_REGISTER (0x7C000000 + 0x500000)
#define HCU_SW_INSTALL_REQUESTED 0x10
/*
* This function is run very early, out of flash, and before devices are
* initialized. It is called by lib_ppc/board.c:board_init_f by virtue
* of being in the init_sequence array.
*
* The SDRAM has been initialized already -- start.S:start called
* init.S:init_sdram early on -- but it is not yet being used for
* anything, not even stack. So be careful.
*/
/* Attention: If you want 1 microsecs times from the external oscillator
* 0x00004051 is okay for u-boot/linux, but different from old vxworks values
* 0x00804051 causes problems with u-boot and linux!
*/
#define CPC0_CR0_VALUE 0x0030103c
#define CPC0_CR1_VALUE 0x00004051
int board_early_init_f (void)
{
/*
* Interrupt controller setup for the HCU4 board.
* Note: IRQ 0-15 405GP internally generated; high; level sensitive
* IRQ 16 405GP internally generated; low; level sensitive
* IRQ 17-24 RESERVED/UNUSED
* IRQ 31 (EXT IRQ 6) (unused)
*/
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
mtdcr(UIC0ER, 0x00000000); /* disable all ints */
mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical */
mtdcr(UIC0PR, 0xFFFFE000); /* set int polarities */
mtdcr(UIC0TR, 0x00000000); /* set int trigger levels */
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
mtdcr(CPC0_CR1, CPC0_CR1_VALUE);
mtdcr(CPC0_ECR, 0x60606000);
mtdcr(CPC0_EIRR, 0x7C000000);
return 0;
}
#ifdef CONFIG_BOARD_PRE_INIT
int board_pre_init (void)
{
return board_early_init_f ();
}
#endif
int sys_install_requested(void)
{
u16 ioValue = in_be16((u16 *)HCU_DIGITAL_IO_REGISTER);
return (ioValue & HCU_SW_INSTALL_REQUESTED) != 0;
}
int checkboard (void)
{
u16 boardVersReg = in_be16((u16 *)HCU_MACH_VERSIONS_REGISTER);
u16 generation = boardVersReg & 0xf0;
u16 index = boardVersReg & 0x0f;
/* Cannot be done in board_early_init */
mtdcr(CPC0_CR0, CPC0_CR0_VALUE);
/* Force /RTS to active. The board it not wired quite
* correctly to use cts/rtc flow control, so just force the
* /RST active and forget about it.
*/
writeb (readb (0xef600404) | 0x03, 0xef600404);
nm_show_print(generation, index, 0);
return 0;
}
u32 hcu_led_get(void)
{
return (~(in_be32((u32 *)GPIO0_OR)) >> 23) & 0xff;
}
/*
* hcu_led_set value to be placed into the LEDs (max 6 bit)
*/
void hcu_led_set(u32 value)
{
u32 tmp = ~value;
tmp = (tmp << 23) | 0x7FFFFF;
out_be32((u32 *)GPIO0_OR, tmp);
}
/*
* hcu_get_slot
*/
u32 hcu_get_slot(void)
{
u16 slot = in_be16((u16 *)HCU_SLOT_ADDRESS);
return slot & 0x7f;
}
/*
* get_serial_number
*/
u32 get_serial_number(void)
{
u32 serial = in_be32((u32 *)CONFIG_SYS_FLASH_BASE);
if (serial == 0xffffffff)
return 0;
return serial;
}
/*
* misc_init_r.
*/
int misc_init_r(void)
{
common_misc_init_r();
set_params_for_sw_install( sys_install_requested(), "hcu4" );
return 0;
}
phys_size_t initdram(int board_type)
{
long dram_size = 0;
u16 boardVersReg = in_be16((u16 *)HCU_MACH_VERSIONS_REGISTER);
u16 generation = boardVersReg & 0xf0;
u16 index = boardVersReg & 0x0f;
if (generation == HW_GENERATION_HCU3 && index < 0xf)
dram_size = 32 << 20; /* 32 MB - RAM */
else
dram_size = 64 << 20; /* 64 MB - RAM */
init_ppc405_sdram(dram_size);
#ifdef DEBUG
show_sdram_registers();
#endif
return dram_size;
}
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
/*
* Hardcoded flash setup:
* Flash 0 is a non-CFI AMD AM29F040 flash, 8 bit flash / 8 bit bus.
*/
ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
{
if (banknum == 0) { /* non-CFI boot flash */
info->portwidth = 1;
info->chipwidth = 1;
info->interface = FLASH_CFI_X8;
return 1;
} else
return 0;
}