mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 15:37:23 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
254 lines
6 KiB
Text
254 lines
6 KiB
Text
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Samsung's Exynos4210 based Trats board device tree source
|
|
*
|
|
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "exynos4210.dtsi"
|
|
|
|
/ {
|
|
model = "Samsung Trats based on Exynos4210";
|
|
compatible = "samsung,trats", "samsung,exynos4210";
|
|
|
|
config {
|
|
samsung,dsim-device-name = "s6e8ax0";
|
|
};
|
|
|
|
aliases {
|
|
serial0 = "/serial@13800000";
|
|
console = "/serial@13820000";
|
|
i2c8 = &i2c_fg;
|
|
};
|
|
|
|
fimd@11c00000 {
|
|
compatible = "samsung,exynos-fimd";
|
|
reg = <0x11c00000 0xa4>;
|
|
|
|
samsung,vl-freq = <60>;
|
|
samsung,vl-col = <720>;
|
|
samsung,vl-row = <1280>;
|
|
samsung,vl-width = <720>;
|
|
samsung,vl-height = <1280>;
|
|
|
|
samsung,vl-clkp = <0>;
|
|
samsung,vl-oep = <0>;
|
|
samsung,vl-hsp = <1>;
|
|
samsung,vl-vsp = <1>;
|
|
samsung,vl-dp = <1>;
|
|
samsung,vl-bpix = <4>;
|
|
|
|
samsung,vl-hspw = <5>;
|
|
samsung,vl-hbpd = <10>;
|
|
samsung,vl-hfpd = <10>;
|
|
samsung,vl-vspw = <2>;
|
|
samsung,vl-vbpd = <1>;
|
|
samsung,vl-vfpd = <13>;
|
|
samsung,vl-cmd-allow-len = <0xf>;
|
|
|
|
samsung,winid = <3>;
|
|
samsung,power-on-delay = <30>;
|
|
samsung,interface-mode = <1>;
|
|
samsung,mipi-enabled = <1>;
|
|
samsung,dp-enabled;
|
|
samsung,dual-lcd-enabled;
|
|
|
|
samsung,logo-on = <1>;
|
|
samsung,resolution = <0>;
|
|
samsung,rgb-mode = <0>;
|
|
};
|
|
|
|
mipidsi@11c80000 {
|
|
compatible = "samsung,exynos-mipi-dsi";
|
|
reg = <0x11c80000 0x5c>;
|
|
|
|
samsung,dsim-config-e-interface = <1>;
|
|
samsung,dsim-config-e-virtual-ch = <0>;
|
|
samsung,dsim-config-e-pixel-format = <7>;
|
|
samsung,dsim-config-e-burst-mode = <1>;
|
|
samsung,dsim-config-e-no-data-lane = <3>;
|
|
samsung,dsim-config-e-byte-clk = <0>;
|
|
samsung,dsim-config-hfp = <1>;
|
|
|
|
samsung,dsim-config-p = <3>;
|
|
samsung,dsim-config-m = <120>;
|
|
samsung,dsim-config-s = <1>;
|
|
|
|
samsung,dsim-config-pll-stable-time = <500>;
|
|
samsung,dsim-config-esc-clk = <20000000>;
|
|
samsung,dsim-config-stop-holding-cnt = <0x7ff>;
|
|
samsung,dsim-config-bta-timeout = <0xff>;
|
|
samsung,dsim-config-rx-timeout = <0xffff>;
|
|
|
|
samsung,dsim-device-id = <0xffffffff>;
|
|
samsung,dsim-device-bus-id = <0>;
|
|
|
|
samsung,dsim-device-reverse-panel = <1>;
|
|
};
|
|
|
|
i2c_fg: fuel-gauge {
|
|
compatible = "i2c-gpio";
|
|
gpios = <&gpy4 1 0>, /* sda */
|
|
<&gpy4 0 0>; /* scl */
|
|
i2c-gpio,delay-us = <2>; /* ~100 kHz */
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&i2c_5 {
|
|
clock-frequency = <100000>;
|
|
status = "okay";
|
|
|
|
max8997-pmic@66 {
|
|
compatible = "maxim,max8997";
|
|
reg = <0x66 0 0>;
|
|
voltage-regulators {
|
|
valive_reg: LDO2 {
|
|
regulator-name = "VALIVE_1.1V_C210";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vusb_reg: LDO3 {
|
|
regulator-name = "VUSB_1.1V_C210";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
};
|
|
|
|
vmipi_reg: LDO4 {
|
|
regulator-name = "VMIPI_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vpda_reg: LDO6 {
|
|
regulator-name = "VCC_1.8V_PDA";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcam_reg: LDO7 {
|
|
regulator-name = "CAM_ISP_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vusbdac_reg: LDO8 {
|
|
regulator-name = "VUSB+VDAC_3.3V_C210";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
vccpda_reg: LDO9 {
|
|
regulator-name = "VCC_2.8V_PDA";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vpll_reg: LDO10 {
|
|
regulator-name = "VPLL_1.1V_C210";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vtcam_reg: LDO12 {
|
|
regulator-name = "VT_CAM_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vcclcd_reg: LDO13 {
|
|
regulator-name = "VCC_3.3V_LCD";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
vlcd_reg: LDO15 {
|
|
regulator-name = "VLCD_2.2V";
|
|
regulator-min-microvolt = <2200000>;
|
|
regulator-max-microvolt = <2200000>;
|
|
};
|
|
|
|
camsensor_reg: LDO16 {
|
|
regulator-name = "CAM_SENSOR_IO_1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
vddq_reg: LDO21 {
|
|
regulator-name = "VDDQ_M1M2_1.2V";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
varm_breg: BUCK1 {
|
|
/*
|
|
* HACK: The real name is VARM_1.2V_C210,
|
|
* but exynos-cpufreq does not support
|
|
* DT-based regulator lookup yet.
|
|
*/
|
|
regulator-name = "vdd_arm";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vint_breg: BUCK2 {
|
|
regulator-name = "VINT_1.1V_C210";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
camisp_breg: BUCK4 {
|
|
regulator-name = "CAM_ISP_CORE_1.2V";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
vmem_breg: BUCK5 {
|
|
regulator-name = "VMEM_1.2V_C210";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vccsub_breg: BUCK7 {
|
|
regulator-name = "VCC_SUB_2.0V";
|
|
regulator-min-microvolt = <2000000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
safe1_sreg: ESAFEOUT1 {
|
|
regulator-name = "SAFEOUT1";
|
|
};
|
|
|
|
safe2_sreg: ESAFEOUT2 {
|
|
regulator-name = "SAFEOUT2";
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&sdhci0 {
|
|
samsung,bus-width = <8>;
|
|
samsung,timing = <1 3 3>;
|
|
pwr-gpios = <&gpk0 2 0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhci2 {
|
|
samsung,bus-width = <4>;
|
|
samsung,timing = <1 2 3>;
|
|
cd-gpios = <&gpx3 4 0>;
|
|
status = "okay";
|
|
};
|