mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-06 13:14:27 +00:00
9d26506a9c
The Amlogic Meson SoCs embeds a Flash oriented SPI Controller name SPIFC. This driver, ported from the Linux meson-spi-spifc driver, add support for this controller on the Amlogic Meson GX SoCs in U-Boot. Tested-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
320 lines
7.9 KiB
C
320 lines
7.9 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
|
|
* Copyright (C) 2018 BayLibre, SAS
|
|
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
|
*
|
|
* Amlogic Meson SPI Flash Controller driver
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <spi.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <regmap.h>
|
|
#include <errno.h>
|
|
#include <asm/io.h>
|
|
#include <linux/bitfield.h>
|
|
|
|
/* register map */
|
|
#define REG_CMD 0x00
|
|
#define REG_ADDR 0x04
|
|
#define REG_CTRL 0x08
|
|
#define REG_CTRL1 0x0c
|
|
#define REG_STATUS 0x10
|
|
#define REG_CTRL2 0x14
|
|
#define REG_CLOCK 0x18
|
|
#define REG_USER 0x1c
|
|
#define REG_USER1 0x20
|
|
#define REG_USER2 0x24
|
|
#define REG_USER3 0x28
|
|
#define REG_USER4 0x2c
|
|
#define REG_SLAVE 0x30
|
|
#define REG_SLAVE1 0x34
|
|
#define REG_SLAVE2 0x38
|
|
#define REG_SLAVE3 0x3c
|
|
#define REG_C0 0x40
|
|
#define REG_B8 0x60
|
|
#define REG_MAX 0x7c
|
|
|
|
/* register fields */
|
|
#define CMD_USER BIT(18)
|
|
#define CTRL_ENABLE_AHB BIT(17)
|
|
#define CLOCK_SOURCE BIT(31)
|
|
#define CLOCK_DIV_SHIFT 12
|
|
#define CLOCK_DIV_MASK (0x3f << CLOCK_DIV_SHIFT)
|
|
#define CLOCK_CNT_HIGH_SHIFT 6
|
|
#define CLOCK_CNT_HIGH_MASK (0x3f << CLOCK_CNT_HIGH_SHIFT)
|
|
#define CLOCK_CNT_LOW_SHIFT 0
|
|
#define CLOCK_CNT_LOW_MASK (0x3f << CLOCK_CNT_LOW_SHIFT)
|
|
#define USER_DIN_EN_MS BIT(0)
|
|
#define USER_CMP_MODE BIT(2)
|
|
#define USER_CLK_NOT_INV BIT(7)
|
|
#define USER_UC_DOUT_SEL BIT(27)
|
|
#define USER_UC_DIN_SEL BIT(28)
|
|
#define USER_UC_MASK ((BIT(5) - 1) << 27)
|
|
#define USER1_BN_UC_DOUT_SHIFT 17
|
|
#define USER1_BN_UC_DOUT_MASK (0xff << 16)
|
|
#define USER1_BN_UC_DIN_SHIFT 8
|
|
#define USER1_BN_UC_DIN_MASK (0xff << 8)
|
|
#define USER4_CS_POL_HIGH BIT(23)
|
|
#define USER4_IDLE_CLK_HIGH BIT(29)
|
|
#define USER4_CS_ACT BIT(30)
|
|
#define SLAVE_TRST_DONE BIT(4)
|
|
#define SLAVE_OP_MODE BIT(30)
|
|
#define SLAVE_SW_RST BIT(31)
|
|
|
|
#define SPIFC_BUFFER_SIZE 64
|
|
|
|
struct meson_spifc_priv {
|
|
struct regmap *regmap;
|
|
struct clk clk;
|
|
};
|
|
|
|
/**
|
|
* meson_spifc_drain_buffer() - copy data from device buffer to memory
|
|
* @spifc: the Meson SPI device
|
|
* @buf: the destination buffer
|
|
* @len: number of bytes to copy
|
|
*/
|
|
static void meson_spifc_drain_buffer(struct meson_spifc_priv *spifc,
|
|
u8 *buf, int len)
|
|
{
|
|
u32 data;
|
|
int i = 0;
|
|
|
|
while (i < len) {
|
|
regmap_read(spifc->regmap, REG_C0 + i, &data);
|
|
|
|
if (len - i >= 4) {
|
|
*((u32 *)buf) = data;
|
|
buf += 4;
|
|
} else {
|
|
memcpy(buf, &data, len - i);
|
|
break;
|
|
}
|
|
i += 4;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* meson_spifc_fill_buffer() - copy data from memory to device buffer
|
|
* @spifc: the Meson SPI device
|
|
* @buf: the source buffer
|
|
* @len: number of bytes to copy
|
|
*/
|
|
static void meson_spifc_fill_buffer(struct meson_spifc_priv *spifc,
|
|
const u8 *buf, int len)
|
|
{
|
|
u32 data = 0;
|
|
int i = 0;
|
|
|
|
while (i < len) {
|
|
if (len - i >= 4)
|
|
data = *(u32 *)buf;
|
|
else
|
|
memcpy(&data, buf, len - i);
|
|
|
|
regmap_write(spifc->regmap, REG_C0 + i, data);
|
|
|
|
buf += 4;
|
|
i += 4;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* meson_spifc_txrx() - transfer a chunk of data
|
|
* @spifc: the Meson SPI device
|
|
* @dout: data buffer for TX
|
|
* @din: data buffer for RX
|
|
* @offset: offset of the data to transfer
|
|
* @len: length of the data to transfer
|
|
* @last_xfer: whether this is the last transfer of the message
|
|
* @last_chunk: whether this is the last chunk of the transfer
|
|
* Return: 0 on success, a negative value on error
|
|
*/
|
|
static int meson_spifc_txrx(struct meson_spifc_priv *spifc,
|
|
const u8 *dout, u8 *din, int offset,
|
|
int len, bool last_xfer, bool last_chunk)
|
|
{
|
|
bool keep_cs = true;
|
|
u32 data;
|
|
int ret;
|
|
|
|
if (dout)
|
|
meson_spifc_fill_buffer(spifc, dout + offset, len);
|
|
|
|
/* enable DOUT stage */
|
|
regmap_update_bits(spifc->regmap, REG_USER, USER_UC_MASK,
|
|
USER_UC_DOUT_SEL);
|
|
regmap_write(spifc->regmap, REG_USER1,
|
|
(8 * len - 1) << USER1_BN_UC_DOUT_SHIFT);
|
|
|
|
/* enable data input during DOUT */
|
|
regmap_update_bits(spifc->regmap, REG_USER, USER_DIN_EN_MS,
|
|
USER_DIN_EN_MS);
|
|
|
|
if (last_chunk && last_xfer)
|
|
keep_cs = false;
|
|
|
|
regmap_update_bits(spifc->regmap, REG_USER4, USER4_CS_ACT,
|
|
keep_cs ? USER4_CS_ACT : 0);
|
|
|
|
/* clear transition done bit */
|
|
regmap_update_bits(spifc->regmap, REG_SLAVE, SLAVE_TRST_DONE, 0);
|
|
/* start transfer */
|
|
regmap_update_bits(spifc->regmap, REG_CMD, CMD_USER, CMD_USER);
|
|
|
|
/* wait for the current operation to terminate */
|
|
ret = regmap_read_poll_timeout(spifc->regmap, REG_SLAVE, data,
|
|
(data & SLAVE_TRST_DONE),
|
|
0, 5 * CONFIG_SYS_HZ);
|
|
|
|
if (!ret && din)
|
|
meson_spifc_drain_buffer(spifc, din + offset, len);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* meson_spifc_xfer() - perform a single transfer
|
|
* @dev: the SPI controller device
|
|
* @bitlen: length of the transfer
|
|
* @dout: data buffer for TX
|
|
* @din: data buffer for RX
|
|
* @flags: transfer flags
|
|
* Return: 0 on success, a negative value on error
|
|
*/
|
|
static int meson_spifc_xfer(struct udevice *slave, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
struct meson_spifc_priv *spifc = dev_get_priv(slave->parent);
|
|
int blen = bitlen / 8;
|
|
int len, done = 0, ret = 0;
|
|
|
|
if (bitlen % 8)
|
|
return -EINVAL;
|
|
|
|
debug("xfer len %d (%d) dout %p din %p\n", bitlen, blen, dout, din);
|
|
|
|
regmap_update_bits(spifc->regmap, REG_CTRL, CTRL_ENABLE_AHB, 0);
|
|
|
|
while (done < blen && !ret) {
|
|
len = min_t(int, blen - done, SPIFC_BUFFER_SIZE);
|
|
ret = meson_spifc_txrx(spifc, dout, din, done, len,
|
|
flags & SPI_XFER_END,
|
|
done + len >= blen);
|
|
done += len;
|
|
}
|
|
|
|
regmap_update_bits(spifc->regmap, REG_CTRL, CTRL_ENABLE_AHB,
|
|
CTRL_ENABLE_AHB);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* meson_spifc_set_speed() - program the clock divider
|
|
* @dev: the SPI controller device
|
|
* @speed: desired speed in Hz
|
|
*/
|
|
static int meson_spifc_set_speed(struct udevice *dev, uint speed)
|
|
{
|
|
struct meson_spifc_priv *spifc = dev_get_priv(dev);
|
|
unsigned long parent, value;
|
|
int n;
|
|
|
|
parent = clk_get_rate(&spifc->clk);
|
|
n = max_t(int, parent / speed - 1, 1);
|
|
|
|
debug("parent %lu, speed %u, n %d\n", parent, speed, n);
|
|
|
|
value = (n << CLOCK_DIV_SHIFT) & CLOCK_DIV_MASK;
|
|
value |= (n << CLOCK_CNT_LOW_SHIFT) & CLOCK_CNT_LOW_MASK;
|
|
value |= (((n + 1) / 2 - 1) << CLOCK_CNT_HIGH_SHIFT) &
|
|
CLOCK_CNT_HIGH_MASK;
|
|
|
|
regmap_write(spifc->regmap, REG_CLOCK, value);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* meson_spifc_set_mode() - setups the SPI bus mode
|
|
* @dev: the SPI controller device
|
|
* @mode: desired mode bitfield
|
|
* Return: 0 on success, -ENODEV on error
|
|
*/
|
|
static int meson_spifc_set_mode(struct udevice *dev, uint mode)
|
|
{
|
|
struct meson_spifc_priv *spifc = dev_get_priv(dev);
|
|
|
|
if (mode & (SPI_CPHA | SPI_RX_QUAD | SPI_RX_DUAL |
|
|
SPI_TX_QUAD | SPI_TX_DUAL))
|
|
return -ENODEV;
|
|
|
|
regmap_update_bits(spifc->regmap, REG_USER, USER_CLK_NOT_INV,
|
|
mode & SPI_CPOL ? USER_CLK_NOT_INV : 0);
|
|
|
|
regmap_update_bits(spifc->regmap, REG_USER4, USER4_CS_POL_HIGH,
|
|
mode & SPI_CS_HIGH ? USER4_CS_POL_HIGH : 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* meson_spifc_hw_init() - reset and initialize the SPI controller
|
|
* @spifc: the Meson SPI device
|
|
*/
|
|
static void meson_spifc_hw_init(struct meson_spifc_priv *spifc)
|
|
{
|
|
/* reset device */
|
|
regmap_update_bits(spifc->regmap, REG_SLAVE, SLAVE_SW_RST,
|
|
SLAVE_SW_RST);
|
|
/* disable compatible mode */
|
|
regmap_update_bits(spifc->regmap, REG_USER, USER_CMP_MODE, 0);
|
|
/* set master mode */
|
|
regmap_update_bits(spifc->regmap, REG_SLAVE, SLAVE_OP_MODE, 0);
|
|
}
|
|
|
|
static const struct dm_spi_ops meson_spifc_ops = {
|
|
.xfer = meson_spifc_xfer,
|
|
.set_speed = meson_spifc_set_speed,
|
|
.set_mode = meson_spifc_set_mode,
|
|
};
|
|
|
|
static int meson_spifc_probe(struct udevice *dev)
|
|
{
|
|
struct meson_spifc_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
ret = regmap_init_mem(dev_ofnode(dev), &priv->regmap);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_get_by_index(dev, 0, &priv->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_enable(&priv->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
meson_spifc_hw_init(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id meson_spifc_ids[] = {
|
|
{ .compatible = "amlogic,meson-gxbb-spifc", },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(meson_spifc) = {
|
|
.name = "meson_spifc",
|
|
.id = UCLASS_SPI,
|
|
.of_match = meson_spifc_ids,
|
|
.ops = &meson_spifc_ops,
|
|
.probe = meson_spifc_probe,
|
|
.priv_auto_alloc_size = sizeof(struct meson_spifc_priv),
|
|
};
|