Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-25 04:23:46 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/mmc/am654_sdhci.c
Andreas Dannenberg 70942db4dd mmc: am654_sdhci: Allow driver to probe without PDs specified 
We would like to use the driver even without power domains being
specified for cases such as during early boot when the required power
domains have already gotten enabled by the SoC's boot ROM and such
explicit initialization is not needed and possible.

Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-07-17 11:12:54 -04:00

333 lines
7.9 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
*
* Texas Instruments' K3 SD Host Controller Interface
*/
#include <clk.h>
#include <common.h>
#include <dm.h>
#include <malloc.h>
#include <power-domain.h>
#include <regmap.h>
#include <sdhci.h>
/* CTL_CFG Registers */
#define CTL_CFG_2 0x14
#define SLOTTYPE_MASK GENMASK(31, 30)
#define SLOTTYPE_EMBEDDED BIT(30)
/* PHY Registers */
#define PHY_CTRL1 0x100
#define PHY_CTRL2 0x104
#define PHY_CTRL3 0x108
#define PHY_CTRL4 0x10C
#define PHY_CTRL5 0x110
#define PHY_CTRL6 0x114
#define PHY_STAT1 0x130
#define PHY_STAT2 0x134
#define IOMUX_ENABLE_SHIFT 31
#define IOMUX_ENABLE_MASK BIT(IOMUX_ENABLE_SHIFT)
#define OTAPDLYENA_SHIFT 20
#define OTAPDLYENA_MASK BIT(OTAPDLYENA_SHIFT)
#define OTAPDLYSEL_SHIFT 12
#define OTAPDLYSEL_MASK GENMASK(15, 12)
#define STRBSEL_SHIFT 24
#define STRBSEL_MASK GENMASK(27, 24)
#define SEL50_SHIFT 8
#define SEL50_MASK BIT(SEL50_SHIFT)
#define SEL100_SHIFT 9
#define SEL100_MASK BIT(SEL100_SHIFT)
#define DLL_TRIM_ICP_SHIFT 4
#define DLL_TRIM_ICP_MASK GENMASK(7, 4)
#define DR_TY_SHIFT 20
#define DR_TY_MASK GENMASK(22, 20)
#define ENDLL_SHIFT 1
#define ENDLL_MASK BIT(ENDLL_SHIFT)
#define DLLRDY_SHIFT 0
#define DLLRDY_MASK BIT(DLLRDY_SHIFT)
#define PDB_SHIFT 0
#define PDB_MASK BIT(PDB_SHIFT)
#define CALDONE_SHIFT 1
#define CALDONE_MASK BIT(CALDONE_SHIFT)
#define RETRIM_SHIFT 17
#define RETRIM_MASK BIT(RETRIM_SHIFT)
#define DRIVER_STRENGTH_50_OHM 0x0
#define DRIVER_STRENGTH_33_OHM 0x1
#define DRIVER_STRENGTH_66_OHM 0x2
#define DRIVER_STRENGTH_100_OHM 0x3
#define DRIVER_STRENGTH_40_OHM 0x4
#define AM654_SDHCI_MIN_FREQ 400000
struct am654_sdhci_plat {
struct mmc_config cfg;
struct mmc mmc;
struct regmap *base;
bool non_removable;
u32 otap_del_sel;
u32 trm_icp;
u32 drv_strength;
bool dll_on;
};
static void am654_sdhci_set_control_reg(struct sdhci_host *host)
{
struct mmc *mmc = (struct mmc *)host->mmc;
u32 reg;
if (IS_SD(host->mmc) &&
mmc->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);
reg |= SDHCI_CTRL_VDD_180;
sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);
}
sdhci_set_uhs_timing(host);
}
static int am654_sdhci_set_ios_post(struct sdhci_host *host)
{
struct udevice *dev = host->mmc->dev;
struct am654_sdhci_plat *plat = dev_get_platdata(dev);
unsigned int speed = host->mmc->clock;
int sel50, sel100;
u32 mask, val;
int ret;
/* Reset SD Clock Enable */
val = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
val &= ~SDHCI_CLOCK_CARD_EN;
sdhci_writew(host, val, SDHCI_CLOCK_CONTROL);
/* power off phy */
if (plat->dll_on) {
regmap_update_bits(plat->base, PHY_CTRL1, ENDLL_MASK, 0);
plat->dll_on = false;
}
/* restart clock */
sdhci_set_clock(host->mmc, speed);
/* switch phy back on */
if (speed > AM654_SDHCI_MIN_FREQ) {
mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK;
val = (1 << OTAPDLYENA_SHIFT) |
(plat->otap_del_sel << OTAPDLYSEL_SHIFT);
regmap_update_bits(plat->base, PHY_CTRL4, mask, val);
switch (speed) {
case 200000000:
sel50 = 0;
sel100 = 0;
break;
case 100000000:
sel50 = 0;
sel100 = 1;
break;
default:
sel50 = 1;
sel100 = 0;
}
/* Configure PHY DLL frequency */
mask = SEL50_MASK | SEL100_MASK;
val = (sel50 << SEL50_SHIFT) | (sel100 << SEL100_SHIFT);
regmap_update_bits(plat->base, PHY_CTRL5, mask, val);
/* Enable DLL */
regmap_update_bits(plat->base, PHY_CTRL1, ENDLL_MASK,
0x1 << ENDLL_SHIFT);
/*
* Poll for DLL ready. Use a one second timeout.
* Works in all experiments done so far
*/
ret = regmap_read_poll_timeout(plat->base, PHY_STAT1, val,
val & DLLRDY_MASK, 1000, 1000000);
if (ret)
return ret;
plat->dll_on = true;
}
return 0;
}
const struct sdhci_ops am654_sdhci_ops = {
.set_ios_post = &am654_sdhci_set_ios_post,
.set_control_reg = &am654_sdhci_set_control_reg,
};
int am654_sdhci_init(struct am654_sdhci_plat *plat)
{
u32 ctl_cfg_2 = 0;
u32 mask, val;
int ret;
/* Reset OTAP to default value */
mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK;
regmap_update_bits(plat->base, PHY_CTRL4, mask, 0x0);
regmap_read(plat->base, PHY_STAT1, &val);
if (~val & CALDONE_MASK) {
/* Calibrate IO lines */
regmap_update_bits(plat->base, PHY_CTRL1, PDB_MASK, PDB_MASK);
ret = regmap_read_poll_timeout(plat->base, PHY_STAT1, val,
val & CALDONE_MASK, 1, 20);
if (ret)
return ret;
}
/* Configure DLL TRIM */
mask = DLL_TRIM_ICP_MASK;
val = plat->trm_icp << DLL_TRIM_ICP_SHIFT;
/* Configure DLL driver strength */
mask |= DR_TY_MASK;
val |= plat->drv_strength << DR_TY_SHIFT;
regmap_update_bits(plat->base, PHY_CTRL1, mask, val);
/* Enable pins by setting IO mux to 0 */
regmap_update_bits(plat->base, PHY_CTRL1, IOMUX_ENABLE_MASK, 0);
/* Set slot type based on SD or eMMC */
if (plat->non_removable)
ctl_cfg_2 = SLOTTYPE_EMBEDDED;
regmap_update_bits(plat->base, CTL_CFG_2, SLOTTYPE_MASK, ctl_cfg_2);
return 0;
}
static int am654_sdhci_probe(struct udevice *dev)
{
struct am654_sdhci_plat *plat = dev_get_platdata(dev);
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
struct sdhci_host *host = dev_get_priv(dev);
struct mmc_config *cfg = &plat->cfg;
struct power_domain sdhci_pwrdmn;
struct clk clk;
unsigned long clock;
int ret;
ret = power_domain_get_by_index(dev, &sdhci_pwrdmn, 0);
if (!ret) {
ret = power_domain_on(&sdhci_pwrdmn);
if (ret) {
dev_err(dev, "Power domain on failed (%d)\n", ret);
return ret;
}
} else if (ret != -ENOENT && ret != -ENODEV && ret != -ENOSYS) {
dev_err(dev, "failed to get power domain (%d)\n", ret);
return ret;
}
ret = clk_get_by_index(dev, 0, &clk);
if (ret) {
dev_err(dev, "failed to get clock\n");
return ret;
}
clock = clk_get_rate(&clk);
if (IS_ERR_VALUE(clock)) {
dev_err(dev, "failed to get rate\n");
return clock;
}
host->max_clk = clock;
host->mmc = &plat->mmc;
host->mmc->dev = dev;
ret = sdhci_setup_cfg(cfg, host, cfg->f_max,
AM654_SDHCI_MIN_FREQ);
if (ret)
return ret;
host->ops = &am654_sdhci_ops;
host->mmc->priv = host;
upriv->mmc = host->mmc;
regmap_init_mem_index(dev_ofnode(dev), &plat->base, 1);
am654_sdhci_init(plat);
return sdhci_probe(dev);
}
static int am654_sdhci_ofdata_to_platdata(struct udevice *dev)
{
struct am654_sdhci_plat *plat = dev_get_platdata(dev);
struct sdhci_host *host = dev_get_priv(dev);
struct mmc_config *cfg = &plat->cfg;
u32 drv_strength;
int ret;
host->name = dev->name;
host->ioaddr = (void *)dev_read_addr(dev);
plat->non_removable = dev_read_bool(dev, "non-removable");
ret = dev_read_u32(dev, "ti,trm-icp", &plat->trm_icp);
if (ret)
return ret;
ret = dev_read_u32(dev, "ti,otap-del-sel", &plat->otap_del_sel);
if (ret)
return ret;
ret = dev_read_u32(dev, "ti,driver-strength-ohm", &drv_strength);
if (ret)
return ret;
switch (drv_strength) {
case 50:
plat->drv_strength = DRIVER_STRENGTH_50_OHM;
break;
case 33:
plat->drv_strength = DRIVER_STRENGTH_33_OHM;
break;
case 66:
plat->drv_strength = DRIVER_STRENGTH_66_OHM;
break;
case 100:
plat->drv_strength = DRIVER_STRENGTH_100_OHM;
break;
case 40:
plat->drv_strength = DRIVER_STRENGTH_40_OHM;
break;
default:
dev_err(dev, "Invalid driver strength\n");
return -EINVAL;
}
ret = mmc_of_parse(dev, cfg);
if (ret)
return ret;
return 0;
}
static int am654_sdhci_bind(struct udevice *dev)
{
struct am654_sdhci_plat *plat = dev_get_platdata(dev);
return sdhci_bind(dev, &plat->mmc, &plat->cfg);
}
static const struct udevice_id am654_sdhci_ids[] = {
{ .compatible = "ti,am654-sdhci-5.1" },
{ }
};
U_BOOT_DRIVER(am654_sdhci_drv) = {
.name = "am654_sdhci",
.id = UCLASS_MMC,
.of_match = am654_sdhci_ids,
.ofdata_to_platdata = am654_sdhci_ofdata_to_platdata,
.ops = &sdhci_ops,
.bind = am654_sdhci_bind,
.probe = am654_sdhci_probe,
.priv_auto_alloc_size = sizeof(struct sdhci_host),
.platdata_auto_alloc_size = sizeof(struct am654_sdhci_plat),
};
Reference in a new issue View git blame Copy permalink