u-boot/drivers/video/sunxi/sunxi_dw_hdmi.c
Jernej Skrabec 59dd8622d0 video: sunxi: dw-hdmi: read source_id later
There is no real need to read source_id at probe time. It also doesn't
make sense to store it in driver private data since it's already stored
in class platform data. While this looks like cleanup (and it is), it's
also important for DE2 driver rework because this info will be filled
later (after probe is already executed).

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-04-24 13:44:59 +02:00

383 lines
9.4 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Allwinner DW HDMI bridge
*
* (C) Copyright 2017 Jernej Skrabec <jernej.skrabec@siol.net>
*/
#include <common.h>
#include <display.h>
#include <dm.h>
#include <dw_hdmi.h>
#include <edid.h>
#include <log.h>
#include <time.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/lcdc.h>
#include <linux/bitops.h>
#include <linux/delay.h>
struct sunxi_dw_hdmi_priv {
struct dw_hdmi hdmi;
};
struct sunxi_hdmi_phy {
u32 pol;
u32 res1[3];
u32 read_en;
u32 unscramble;
u32 res2[2];
u32 ctrl;
u32 unk1;
u32 unk2;
u32 pll;
u32 clk;
u32 unk3;
u32 status;
};
#define HDMI_PHY_OFFS 0x10000
static int sunxi_dw_hdmi_get_divider(uint clock)
{
/*
* Due to missing documentaion of HDMI PHY, we know correct
* settings only for following four PHY dividers. Select one
* based on clock speed.
*/
if (clock <= 27000000)
return 11;
else if (clock <= 74250000)
return 4;
else if (clock <= 148500000)
return 2;
else
return 1;
}
static void sunxi_dw_hdmi_phy_init(void)
{
struct sunxi_hdmi_phy * const phy =
(struct sunxi_hdmi_phy *)(SUNXI_HDMI_BASE + HDMI_PHY_OFFS);
unsigned long tmo;
u32 tmp;
/*
* HDMI PHY settings are taken as-is from Allwinner BSP code.
* There is no documentation.
*/
writel(0, &phy->ctrl);
setbits_le32(&phy->ctrl, BIT(0));
udelay(5);
setbits_le32(&phy->ctrl, BIT(16));
setbits_le32(&phy->ctrl, BIT(1));
udelay(10);
setbits_le32(&phy->ctrl, BIT(2));
udelay(5);
setbits_le32(&phy->ctrl, BIT(3));
udelay(40);
setbits_le32(&phy->ctrl, BIT(19));
udelay(100);
setbits_le32(&phy->ctrl, BIT(18));
setbits_le32(&phy->ctrl, 7 << 4);
/* Note that Allwinner code doesn't fail in case of timeout */
tmo = timer_get_us() + 2000;
while ((readl(&phy->status) & 0x80) == 0) {
if (timer_get_us() > tmo) {
printf("Warning: HDMI PHY init timeout!\n");
break;
}
}
setbits_le32(&phy->ctrl, 0xf << 8);
setbits_le32(&phy->ctrl, BIT(7));
writel(0x39dc5040, &phy->pll);
writel(0x80084343, &phy->clk);
udelay(10000);
writel(1, &phy->unk3);
setbits_le32(&phy->pll, BIT(25));
udelay(100000);
tmp = (readl(&phy->status) & 0x1f800) >> 11;
setbits_le32(&phy->pll, BIT(31) | BIT(30));
setbits_le32(&phy->pll, tmp);
writel(0x01FF0F7F, &phy->ctrl);
writel(0x80639000, &phy->unk1);
writel(0x0F81C405, &phy->unk2);
/* enable read access to HDMI controller */
writel(0x54524545, &phy->read_en);
/* descramble register offsets */
writel(0x42494E47, &phy->unscramble);
}
static void sunxi_dw_hdmi_phy_set(uint clock, int phy_div)
{
struct sunxi_hdmi_phy * const phy =
(struct sunxi_hdmi_phy *)(SUNXI_HDMI_BASE + HDMI_PHY_OFFS);
int div = sunxi_dw_hdmi_get_divider(clock);
u32 tmp;
/*
* Unfortunately, we don't know much about those magic
* numbers. They are taken from Allwinner BSP driver.
*/
switch (div) {
case 1:
writel(0x30dc5fc0, &phy->pll);
writel(0x800863C0 | (phy_div - 1), &phy->clk);
mdelay(10);
writel(0x00000001, &phy->unk3);
setbits_le32(&phy->pll, BIT(25));
mdelay(200);
tmp = (readl(&phy->status) & 0x1f800) >> 11;
setbits_le32(&phy->pll, BIT(31) | BIT(30));
if (tmp < 0x3d)
setbits_le32(&phy->pll, tmp + 2);
else
setbits_le32(&phy->pll, 0x3f);
mdelay(100);
writel(0x01FFFF7F, &phy->ctrl);
writel(0x8063b000, &phy->unk1);
writel(0x0F8246B5, &phy->unk2);
break;
case 2:
writel(0x39dc5040, &phy->pll);
writel(0x80084380 | (phy_div - 1), &phy->clk);
mdelay(10);
writel(0x00000001, &phy->unk3);
setbits_le32(&phy->pll, BIT(25));
mdelay(100);
tmp = (readl(&phy->status) & 0x1f800) >> 11;
setbits_le32(&phy->pll, BIT(31) | BIT(30));
setbits_le32(&phy->pll, tmp);
writel(0x01FFFF7F, &phy->ctrl);
writel(0x8063a800, &phy->unk1);
writel(0x0F81C485, &phy->unk2);
break;
case 4:
writel(0x39dc5040, &phy->pll);
writel(0x80084340 | (phy_div - 1), &phy->clk);
mdelay(10);
writel(0x00000001, &phy->unk3);
setbits_le32(&phy->pll, BIT(25));
mdelay(100);
tmp = (readl(&phy->status) & 0x1f800) >> 11;
setbits_le32(&phy->pll, BIT(31) | BIT(30));
setbits_le32(&phy->pll, tmp);
writel(0x01FFFF7F, &phy->ctrl);
writel(0x8063b000, &phy->unk1);
writel(0x0F81C405, &phy->unk2);
break;
case 11:
writel(0x39dc5040, &phy->pll);
writel(0x80084300 | (phy_div - 1), &phy->clk);
mdelay(10);
writel(0x00000001, &phy->unk3);
setbits_le32(&phy->pll, BIT(25));
mdelay(100);
tmp = (readl(&phy->status) & 0x1f800) >> 11;
setbits_le32(&phy->pll, BIT(31) | BIT(30));
setbits_le32(&phy->pll, tmp);
writel(0x01FFFF7F, &phy->ctrl);
writel(0x8063b000, &phy->unk1);
writel(0x0F81C405, &phy->unk2);
break;
}
}
static void sunxi_dw_hdmi_pll_set(uint clk_khz, int *phy_div)
{
int value, n, m, div, diff;
int best_n = 0, best_m = 0, best_div = 0, best_diff = 0x0FFFFFFF;
/*
* Find the lowest divider resulting in a matching clock. If there
* is no match, pick the closest lower clock, as monitors tend to
* not sync to higher frequencies.
*/
for (div = 1; div <= 16; div++) {
int target = clk_khz * div;
if (target < 192000)
continue;
if (target > 912000)
continue;
for (m = 1; m <= 16; m++) {
n = (m * target) / 24000;
if (n >= 1 && n <= 128) {
value = (24000 * n) / m / div;
diff = clk_khz - value;
if (diff < best_diff) {
best_diff = diff;
best_m = m;
best_n = n;
best_div = div;
}
}
}
}
*phy_div = best_div;
clock_set_pll3_factors(best_m, best_n);
debug("dotclock: %dkHz = %dkHz: (24MHz * %d) / %d / %d\n",
clk_khz, (clock_get_pll3() / 1000) / best_div,
best_n, best_m, best_div);
}
static void sunxi_dw_hdmi_lcdc_init(int mux, const struct display_timing *edid,
int bpp)
{
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
int div = DIV_ROUND_UP(clock_get_pll3(), edid->pixelclock.typ);
struct sunxi_lcdc_reg *lcdc;
if (mux == 0) {
lcdc = (struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE;
/* Reset off */
setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_LCD0);
/* Clock on */
setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_LCD0);
writel(CCM_LCD0_CTRL_GATE | CCM_LCD0_CTRL_M(div),
&ccm->lcd0_clk_cfg);
} else {
lcdc = (struct sunxi_lcdc_reg *)SUNXI_LCD1_BASE;
/* Reset off */
setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_LCD1);
/* Clock on */
setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_LCD1);
writel(CCM_LCD1_CTRL_GATE | CCM_LCD1_CTRL_M(div),
&ccm->lcd1_clk_cfg);
}
lcdc_init(lcdc);
lcdc_tcon1_mode_set(lcdc, edid, false, false);
lcdc_enable(lcdc, bpp);
}
static int sunxi_dw_hdmi_phy_cfg(struct dw_hdmi *hdmi, uint mpixelclock)
{
int phy_div;
sunxi_dw_hdmi_pll_set(mpixelclock / 1000, &phy_div);
sunxi_dw_hdmi_phy_set(mpixelclock, phy_div);
return 0;
}
static int sunxi_dw_hdmi_read_edid(struct udevice *dev, u8 *buf, int buf_size)
{
struct sunxi_dw_hdmi_priv *priv = dev_get_priv(dev);
return dw_hdmi_read_edid(&priv->hdmi, buf, buf_size);
}
static bool sunxi_dw_hdmi_mode_valid(struct udevice *dev,
const struct display_timing *timing)
{
return timing->pixelclock.typ <= 297000000;
}
static int sunxi_dw_hdmi_enable(struct udevice *dev, int panel_bpp,
const struct display_timing *edid)
{
struct sunxi_hdmi_phy * const phy =
(struct sunxi_hdmi_phy *)(SUNXI_HDMI_BASE + HDMI_PHY_OFFS);
struct display_plat *uc_plat = dev_get_uclass_plat(dev);
struct sunxi_dw_hdmi_priv *priv = dev_get_priv(dev);
int ret;
ret = dw_hdmi_enable(&priv->hdmi, edid);
if (ret)
return ret;
sunxi_dw_hdmi_lcdc_init(uc_plat->source_id, edid, panel_bpp);
if (edid->flags & DISPLAY_FLAGS_VSYNC_LOW)
setbits_le32(&phy->pol, 0x200);
if (edid->flags & DISPLAY_FLAGS_HSYNC_LOW)
setbits_le32(&phy->pol, 0x100);
setbits_le32(&phy->ctrl, 0xf << 12);
/*
* This is last hdmi access before boot, so scramble addresses
* again or othwerwise BSP driver won't work. Dummy read is
* needed or otherwise last write doesn't get written correctly.
*/
(void)readb(SUNXI_HDMI_BASE);
writel(0, &phy->unscramble);
return 0;
}
static int sunxi_dw_hdmi_probe(struct udevice *dev)
{
struct sunxi_dw_hdmi_priv *priv = dev_get_priv(dev);
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
int ret;
/* Set pll3 to 297 MHz */
clock_set_pll3(297000000);
/* Set hdmi parent to pll3 */
clrsetbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_PLL_MASK,
CCM_HDMI_CTRL_PLL3);
/* Set ahb gating to pass */
setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_HDMI);
setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_HDMI2);
setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_HDMI);
setbits_le32(&ccm->hdmi_slow_clk_cfg, CCM_HDMI_SLOW_CTRL_DDC_GATE);
/* Clock on */
setbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_GATE);
sunxi_dw_hdmi_phy_init();
priv->hdmi.ioaddr = SUNXI_HDMI_BASE;
priv->hdmi.i2c_clk_high = 0xd8;
priv->hdmi.i2c_clk_low = 0xfe;
priv->hdmi.reg_io_width = 1;
priv->hdmi.phy_set = sunxi_dw_hdmi_phy_cfg;
ret = dw_hdmi_phy_wait_for_hpd(&priv->hdmi);
if (ret < 0) {
debug("hdmi can not get hpd signal\n");
return -1;
}
dw_hdmi_init(&priv->hdmi);
return 0;
}
static const struct dm_display_ops sunxi_dw_hdmi_ops = {
.read_edid = sunxi_dw_hdmi_read_edid,
.enable = sunxi_dw_hdmi_enable,
.mode_valid = sunxi_dw_hdmi_mode_valid,
};
U_BOOT_DRIVER(sunxi_dw_hdmi) = {
.name = "sunxi_dw_hdmi",
.id = UCLASS_DISPLAY,
.ops = &sunxi_dw_hdmi_ops,
.probe = sunxi_dw_hdmi_probe,
.priv_auto = sizeof(struct sunxi_dw_hdmi_priv),
};
U_BOOT_DRVINFO(sunxi_dw_hdmi) = {
.name = "sunxi_dw_hdmi"
};