mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-07 05:34:28 +00:00
c25e9e04a1
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - i2c/nx_i2c.c: Some adaptions mainly because of changes in "struct udevice". - several Bugfixes in nx_i2c.c. - the driver has been for s5p6818 only. Code extended appropriately in order s5p4418 is also working. - "probe_chip" added. - pinctrl-driver/dt is used instead of configuring the i2c I/O-pins in the i2c-driver. - '#ifdef CONFIG...' changed to 'if (IS_ENABLED(CONFIG...))' where possible (and similar). - livetree API (dev_read_...) is used instead of fdt one (fdt...). Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
28 lines
773 B
Text
28 lines
773 B
Text
I2C controller embedded in Nexell's/Samsung's SoC S5P4418 and S5P6818
|
|
|
|
Driver:
|
|
- drivers/i2c/nx_i2c.c
|
|
|
|
Required properties:
|
|
- #address-cells = <1>;
|
|
- #size-cells = <0>;
|
|
- compatible = "nexell,s5pxx18-i2c";
|
|
- reg = <i2c_base 0x100>;
|
|
Where i2c_base has to be the base address of the i2c-register set.
|
|
I2C0: 0xc00a4000
|
|
I2C1: 0xc00a5000
|
|
I2C2: 0xc00a6000
|
|
|
|
Optional properties:
|
|
- clock-frequency: Desired I2C bus frequency in Hz, default value is 100000.
|
|
- i2c-sda-delay-ns (S5P6818 only): SDA delay in ns, default value is 0.
|
|
- Child nodes conforming to i2c bus binding.
|
|
|
|
Example:
|
|
i2c0:i2c@c00a4000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "nexell,s5pxx18-i2c";
|
|
reg = <0xc00a4000 0x100>;
|
|
clock-frequency = <400000>;
|
|
};
|