mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-07 05:34:28 +00:00
81 lines
3.2 KiB
ReStructuredText
81 lines
3.2 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+
|
||
|
||
Xen guest ARM64 board
|
||
=====================
|
||
|
||
This board specification
|
||
------------------------
|
||
|
||
This board is to be run as a virtual Xen [1] guest with U-boot as its primary
|
||
bootloader. Xen is a type 1 hypervisor that allows multiple operating systems
|
||
to run simultaneously on a single physical server. Xen is capable of running
|
||
virtual machines in both full virtualization and para-virtualization (PV)
|
||
modes. Xen runs virtual machines, which are called “domains”.
|
||
|
||
Paravirtualized drivers are a special type of device drivers that are used in
|
||
a guest system in the Xen domain and perform I/O operations using a special
|
||
interface provided by the virtualization system and the host system.
|
||
|
||
Xen support for U-boot is implemented by introducing a new Xen guest ARM64
|
||
board and porting essential drivers from MiniOS [3] as well as some of the work
|
||
previously done by NXP [4]:
|
||
|
||
- PV block device frontend driver with XenStore based device enumeration and
|
||
UCLASS_PVBLOCK class;
|
||
- PV serial console device frontend driver;
|
||
- Xen hypervisor support with minimal set of the essential headers adapted from
|
||
the Linux kernel;
|
||
- Xen grant table support;
|
||
- Xen event channel support in polling mode;
|
||
- XenBus support;
|
||
- dynamic RAM size as defined in the device tree instead of the statically
|
||
defined values;
|
||
- position-independent pre-relocation code is used as we cannot statically
|
||
define any start addresses at compile time which is up to Xen to choose at
|
||
run-time;
|
||
- new defconfig introduced: xenguest_arm64_defconfig.
|
||
|
||
|
||
Board limitations
|
||
-----------------
|
||
|
||
1. U-boot runs without MMU enabled at the early stages.
|
||
According to Xen on ARM ABI (xen/include/public/arch-arm.h): all memory
|
||
which is shared with other entities in the system (including the hypervisor
|
||
and other guests) must reside in memory which is mapped as Normal Inner
|
||
Write-Back Outer Write-Back Inner-Shareable.
|
||
Thus, page attributes must be equally set for all the entities working with
|
||
that page.
|
||
Before MMU is set up the data cache is turned off and pages are seen by the
|
||
vCPU and Xen in different ways - cacheable by Xen and non-cacheable by vCPU.
|
||
So it means that manual data cache maintenance is required at the early
|
||
stages.
|
||
|
||
2. No serial console until MMU is up.
|
||
Because data cache maintenance is required until the MMU setup the
|
||
early/debug serial console is not implemented. Therefore, we do not have
|
||
usual prints like U-boot’s banner etc. until the serial driver is
|
||
initialized.
|
||
|
||
3. Single RAM bank supported.
|
||
If a Xen guest is given much memory it is possible that Xen allocates two
|
||
memory banks for it. The first one is allocated under 4GB address space and
|
||
in some cases may represent the whole guest’s memory. It is assumed that
|
||
U-boot most likely won’t require high memory bank for its work andlaunching
|
||
OS, so it is enough to take the first one.
|
||
|
||
|
||
Board default configuration
|
||
---------------------------
|
||
|
||
One can select the configuration as follows:
|
||
|
||
- make xenguest_arm64_defconfig
|
||
|
||
[1] - https://xenproject.org/
|
||
|
||
[2] - https://wiki.xenproject.org/wiki/Paravirtualization_(PV)
|
||
|
||
[3] - https://wiki.xenproject.org/wiki/Mini-OS
|
||
|
||
[4] - https://source.codeaurora.org/external/imx/uboot-imx/tree/?h=imx_v2018.03_4.14.98_2.0.0_ga
|