u-boot/arch/arm/dts/zynqmp.dtsi
Thippeswamy Havalige df2ed08b2d arm64: zynqmp: Update ECAM size to discover up to 256 buses
Update ECAM size to discover up to 256 buses

Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
Acked-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/087391c3e1f60b0a765fca081d47ce632fda8f06.1694441445.git.michal.simek@amd.com
2023-09-21 13:20:11 +02:00

1019 lines
27 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
/*
* dts file for Xilinx ZynqMP
*
* (C) Copyright 2014 - 2021, Xilinx, Inc.
*
* Michal Simek <michal.simek@amd.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*/
#include <dt-bindings/dma/xlnx-zynqmp-dpdma.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/power/xlnx-zynqmp-power.h>
#include <dt-bindings/reset/xlnx-zynqmp-resets.h>
/ {
compatible = "xlnx,zynqmp";
#address-cells = <2>;
#size-cells = <2>;
options {
u-boot {
compatible = "u-boot,config";
bootscr-address = /bits/ 64 <0x20000000>;
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
compatible = "arm,cortex-a53";
device_type = "cpu";
enable-method = "psci";
operating-points-v2 = <&cpu_opp_table>;
reg = <0x0>;
cpu-idle-states = <&CPU_SLEEP_0>;
next-level-cache = <&L2>;
};
cpu1: cpu@1 {
compatible = "arm,cortex-a53";
device_type = "cpu";
enable-method = "psci";
reg = <0x1>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP_0>;
next-level-cache = <&L2>;
};
cpu2: cpu@2 {
compatible = "arm,cortex-a53";
device_type = "cpu";
enable-method = "psci";
reg = <0x2>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP_0>;
next-level-cache = <&L2>;
};
cpu3: cpu@3 {
compatible = "arm,cortex-a53";
device_type = "cpu";
enable-method = "psci";
reg = <0x3>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP_0>;
next-level-cache = <&L2>;
};
L2: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-unified;
};
idle-states {
entry-method = "psci";
CPU_SLEEP_0: cpu-sleep-0 {
compatible = "arm,idle-state";
arm,psci-suspend-param = <0x40000000>;
local-timer-stop;
entry-latency-us = <300>;
exit-latency-us = <600>;
min-residency-us = <10000>;
};
};
};
cpu_opp_table: opp-table-cpu {
compatible = "operating-points-v2";
opp-shared;
opp00 {
opp-hz = /bits/ 64 <1199999988>;
opp-microvolt = <1000000>;
clock-latency-ns = <500000>;
};
opp01 {
opp-hz = /bits/ 64 <599999994>;
opp-microvolt = <1000000>;
clock-latency-ns = <500000>;
};
opp02 {
opp-hz = /bits/ 64 <399999996>;
opp-microvolt = <1000000>;
clock-latency-ns = <500000>;
};
opp03 {
opp-hz = /bits/ 64 <299999997>;
opp-microvolt = <1000000>;
clock-latency-ns = <500000>;
};
};
zynqmp_ipi: zynqmp_ipi {
bootph-all;
compatible = "xlnx,zynqmp-ipi-mailbox";
interrupt-parent = <&gic>;
interrupts = <0 35 4>;
xlnx,ipi-id = <0>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
ipi_mailbox_pmu1: mailbox@ff9905c0 {
bootph-all;
reg = <0x0 0xff9905c0 0x0 0x20>,
<0x0 0xff9905e0 0x0 0x20>,
<0x0 0xff990e80 0x0 0x20>,
<0x0 0xff990ea0 0x0 0x20>;
reg-names = "local_request_region",
"local_response_region",
"remote_request_region",
"remote_response_region";
#mbox-cells = <1>;
xlnx,ipi-id = <4>;
};
};
dcc: dcc {
compatible = "arm,dcc";
status = "disabled";
bootph-all;
};
pmu {
compatible = "arm,armv8-pmuv3";
interrupt-parent = <&gic>;
interrupts = <0 143 4>,
<0 144 4>,
<0 145 4>,
<0 146 4>;
interrupt-affinity = <&cpu0>,
<&cpu1>,
<&cpu2>,
<&cpu3>;
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
firmware {
optee: optee {
compatible = "linaro,optee-tz";
method = "smc";
};
zynqmp_firmware: zynqmp-firmware {
compatible = "xlnx,zynqmp-firmware";
#power-domain-cells = <1>;
method = "smc";
bootph-all;
zynqmp_power: zynqmp-power {
bootph-all;
compatible = "xlnx,zynqmp-power";
interrupt-parent = <&gic>;
interrupts = <0 35 4>;
mboxes = <&ipi_mailbox_pmu1 0>, <&ipi_mailbox_pmu1 1>;
mbox-names = "tx", "rx";
};
nvmem_firmware {
compatible = "xlnx,zynqmp-nvmem-fw";
#address-cells = <1>;
#size-cells = <1>;
soc_revision: soc_revision@0 {
reg = <0x0 0x4>;
};
};
zynqmp_pcap: pcap {
compatible = "xlnx,zynqmp-pcap-fpga";
};
xlnx_aes: zynqmp-aes {
compatible = "xlnx,zynqmp-aes";
};
zynqmp_reset: reset-controller {
compatible = "xlnx,zynqmp-reset";
#reset-cells = <1>;
};
pinctrl0: pinctrl {
compatible = "xlnx,zynqmp-pinctrl";
status = "disabled";
};
modepin_gpio: gpio {
compatible = "xlnx,zynqmp-gpio-modepin";
gpio-controller;
#gpio-cells = <2>;
};
};
};
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
interrupts = <1 13 0xf08>,
<1 14 0xf08>,
<1 11 0xf08>,
<1 10 0xf08>;
};
edac {
compatible = "arm,cortex-a53-edac";
};
fpga_full: fpga-full {
compatible = "fpga-region";
fpga-mgr = <&zynqmp_pcap>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
power-domains = <&zynqmp_firmware PD_PL>;
};
amba: axi {
compatible = "simple-bus";
bootph-all;
#address-cells = <2>;
#size-cells = <2>;
ranges;
can0: can@ff060000 {
compatible = "xlnx,zynq-can-1.0";
status = "disabled";
clock-names = "can_clk", "pclk";
reg = <0x0 0xff060000 0x0 0x1000>;
interrupts = <0 23 4>;
interrupt-parent = <&gic>;
tx-fifo-depth = <0x40>;
rx-fifo-depth = <0x40>;
resets = <&zynqmp_reset ZYNQMP_RESET_CAN0>;
power-domains = <&zynqmp_firmware PD_CAN_0>;
};
can1: can@ff070000 {
compatible = "xlnx,zynq-can-1.0";
status = "disabled";
clock-names = "can_clk", "pclk";
reg = <0x0 0xff070000 0x0 0x1000>;
interrupts = <0 24 4>;
interrupt-parent = <&gic>;
tx-fifo-depth = <0x40>;
rx-fifo-depth = <0x40>;
resets = <&zynqmp_reset ZYNQMP_RESET_CAN1>;
power-domains = <&zynqmp_firmware PD_CAN_1>;
};
cci: cci@fd6e0000 {
compatible = "arm,cci-400";
status = "disabled";
reg = <0x0 0xfd6e0000 0x0 0x9000>;
ranges = <0x0 0x0 0xfd6e0000 0x10000>;
#address-cells = <1>;
#size-cells = <1>;
pmu@9000 {
compatible = "arm,cci-400-pmu,r1";
reg = <0x9000 0x5000>;
interrupt-parent = <&gic>;
interrupts = <0 123 4>,
<0 123 4>,
<0 123 4>,
<0 123 4>,
<0 123 4>;
};
};
/* GDMA */
fpd_dma_chan1: dma-controller@fd500000 {
status = "disabled";
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xfd500000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 124 4>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <128>;
iommus = <&smmu 0x14e8>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan2: dma-controller@fd510000 {
status = "disabled";
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xfd510000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 125 4>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <128>;
iommus = <&smmu 0x14e9>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan3: dma-controller@fd520000 {
status = "disabled";
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xfd520000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 126 4>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <128>;
iommus = <&smmu 0x14ea>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan4: dma-controller@fd530000 {
status = "disabled";
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xfd530000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 127 4>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <128>;
iommus = <&smmu 0x14eb>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan5: dma-controller@fd540000 {
status = "disabled";
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xfd540000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 128 4>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <128>;
iommus = <&smmu 0x14ec>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan6: dma-controller@fd550000 {
status = "disabled";
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xfd550000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 129 4>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <128>;
iommus = <&smmu 0x14ed>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan7: dma-controller@fd560000 {
status = "disabled";
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xfd560000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 130 4>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <128>;
iommus = <&smmu 0x14ee>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
fpd_dma_chan8: dma-controller@fd570000 {
status = "disabled";
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xfd570000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 131 4>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <128>;
iommus = <&smmu 0x14ef>;
power-domains = <&zynqmp_firmware PD_GDMA>;
};
gic: interrupt-controller@f9010000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
reg = <0x0 0xf9010000 0x0 0x10000>,
<0x0 0xf9020000 0x0 0x20000>,
<0x0 0xf9040000 0x0 0x20000>,
<0x0 0xf9060000 0x0 0x20000>;
interrupt-controller;
interrupt-parent = <&gic>;
interrupts = <1 9 0xf04>;
};
gpu: gpu@fd4b0000 {
status = "disabled";
compatible = "xlnx,zynqmp-mali", "arm,mali-400";
reg = <0x0 0xfd4b0000 0x0 0x10000>;
interrupt-parent = <&gic>;
interrupts = <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>;
interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1", "ppmmu1";
clock-names = "bus", "core";
power-domains = <&zynqmp_firmware PD_GPU>;
};
/* LPDDMA default allows only secured access. inorder to enable
* These dma channels, Users should ensure that these dma
* Channels are allowed for non secure access.
*/
lpd_dma_chan1: dma-controller@ffa80000 {
status = "disabled";
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xffa80000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 77 4>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <64>;
iommus = <&smmu 0x868>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan2: dma-controller@ffa90000 {
status = "disabled";
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xffa90000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 78 4>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <64>;
iommus = <&smmu 0x869>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan3: dma-controller@ffaa0000 {
status = "disabled";
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xffaa0000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 79 4>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <64>;
iommus = <&smmu 0x86a>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan4: dma-controller@ffab0000 {
status = "disabled";
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xffab0000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 80 4>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <64>;
iommus = <&smmu 0x86b>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan5: dma-controller@ffac0000 {
status = "disabled";
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xffac0000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 81 4>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <64>;
iommus = <&smmu 0x86c>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan6: dma-controller@ffad0000 {
status = "disabled";
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xffad0000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 82 4>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <64>;
iommus = <&smmu 0x86d>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan7: dma-controller@ffae0000 {
status = "disabled";
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xffae0000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 83 4>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <64>;
iommus = <&smmu 0x86e>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
lpd_dma_chan8: dma-controller@ffaf0000 {
status = "disabled";
compatible = "xlnx,zynqmp-dma-1.0";
reg = <0x0 0xffaf0000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 84 4>;
clock-names = "clk_main", "clk_apb";
#dma-cells = <1>;
xlnx,bus-width = <64>;
iommus = <&smmu 0x86f>;
power-domains = <&zynqmp_firmware PD_ADMA>;
};
mc: memory-controller@fd070000 {
compatible = "xlnx,zynqmp-ddrc-2.40a";
reg = <0x0 0xfd070000 0x0 0x30000>;
interrupt-parent = <&gic>;
interrupts = <0 112 4>;
};
nand0: nand-controller@ff100000 {
compatible = "xlnx,zynqmp-nand-controller", "arasan,nfc-v3p10";
status = "disabled";
reg = <0x0 0xff100000 0x0 0x1000>;
clock-names = "controller", "bus";
interrupt-parent = <&gic>;
interrupts = <0 14 4>;
#address-cells = <1>;
#size-cells = <0>;
iommus = <&smmu 0x872>;
power-domains = <&zynqmp_firmware PD_NAND>;
};
gem0: ethernet@ff0b0000 {
compatible = "xlnx,zynqmp-gem", "cdns,gem";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 57 4>, <0 57 4>;
reg = <0x0 0xff0b0000 0x0 0x1000>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
#address-cells = <1>;
#size-cells = <0>;
iommus = <&smmu 0x874>;
power-domains = <&zynqmp_firmware PD_ETH_0>;
resets = <&zynqmp_reset ZYNQMP_RESET_GEM0>;
reset-names = "gem0_rst";
};
gem1: ethernet@ff0c0000 {
compatible = "xlnx,zynqmp-gem", "cdns,gem";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 59 4>, <0 59 4>;
reg = <0x0 0xff0c0000 0x0 0x1000>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
#address-cells = <1>;
#size-cells = <0>;
iommus = <&smmu 0x875>;
power-domains = <&zynqmp_firmware PD_ETH_1>;
resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>;
reset-names = "gem1_rst";
};
gem2: ethernet@ff0d0000 {
compatible = "xlnx,zynqmp-gem", "cdns,gem";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 61 4>, <0 61 4>;
reg = <0x0 0xff0d0000 0x0 0x1000>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
#address-cells = <1>;
#size-cells = <0>;
iommus = <&smmu 0x876>;
power-domains = <&zynqmp_firmware PD_ETH_2>;
resets = <&zynqmp_reset ZYNQMP_RESET_GEM2>;
reset-names = "gem2_rst";
};
gem3: ethernet@ff0e0000 {
compatible = "xlnx,zynqmp-gem", "cdns,gem";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 63 4>, <0 63 4>;
reg = <0x0 0xff0e0000 0x0 0x1000>;
clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
#address-cells = <1>;
#size-cells = <0>;
iommus = <&smmu 0x877>;
power-domains = <&zynqmp_firmware PD_ETH_3>;
resets = <&zynqmp_reset ZYNQMP_RESET_GEM3>;
reset-names = "gem3_rst";
};
gpio: gpio@ff0a0000 {
compatible = "xlnx,zynqmp-gpio-1.0";
status = "disabled";
#gpio-cells = <0x2>;
gpio-controller;
interrupt-parent = <&gic>;
interrupts = <0 16 4>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0xff0a0000 0x0 0x1000>;
power-domains = <&zynqmp_firmware PD_GPIO>;
};
i2c0: i2c@ff020000 {
compatible = "cdns,i2c-r1p14";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 17 4>;
clock-frequency = <400000>;
reg = <0x0 0xff020000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&zynqmp_firmware PD_I2C_0>;
};
i2c1: i2c@ff030000 {
compatible = "cdns,i2c-r1p14";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 18 4>;
clock-frequency = <400000>;
reg = <0x0 0xff030000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&zynqmp_firmware PD_I2C_1>;
};
ocm: memory-controller@ff960000 {
compatible = "xlnx,zynqmp-ocmc-1.0";
reg = <0x0 0xff960000 0x0 0x1000>;
interrupt-parent = <&gic>;
interrupts = <0 10 4>;
};
pcie: pcie@fd0e0000 {
compatible = "xlnx,nwl-pcie-2.11";
status = "disabled";
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
msi-controller;
device_type = "pci";
interrupt-parent = <&gic>;
interrupts = <0 118 4>,
<0 117 4>,
<0 116 4>,
<0 115 4>, /* MSI_1 [63...32] */
<0 114 4>; /* MSI_0 [31...0] */
interrupt-names = "misc", "dummy", "intx",
"msi1", "msi0";
msi-parent = <&pcie>;
reg = <0x0 0xfd0e0000 0x0 0x1000>,
<0x0 0xfd480000 0x0 0x1000>,
<0x80 0x00000000 0x0 0x10000000>;
reg-names = "breg", "pcireg", "cfg";
ranges = <0x02000000 0x00000000 0xe0000000 0x00000000 0xe0000000 0x00000000 0x10000000>,/* non-prefetchable memory */
<0x43000000 0x00000006 0x00000000 0x00000006 0x00000000 0x00000002 0x00000000>;/* prefetchable memory */
bus-range = <0x00 0xff>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
iommus = <&smmu 0x4d0>;
power-domains = <&zynqmp_firmware PD_PCIE>;
pcie_intc: legacy-interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
};
};
qspi: spi@ff0f0000 {
bootph-all;
compatible = "xlnx,zynqmp-qspi-1.0";
status = "disabled";
clock-names = "ref_clk", "pclk";
interrupts = <0 15 4>;
interrupt-parent = <&gic>;
num-cs = <1>;
reg = <0x0 0xff0f0000 0x0 0x1000>,
<0x0 0xc0000000 0x0 0x8000000>;
#address-cells = <1>;
#size-cells = <0>;
iommus = <&smmu 0x873>;
power-domains = <&zynqmp_firmware PD_QSPI>;
};
psgtr: phy@fd400000 {
compatible = "xlnx,zynqmp-psgtr-v1.1";
status = "disabled";
reg = <0x0 0xfd400000 0x0 0x40000>,
<0x0 0xfd3d0000 0x0 0x1000>;
reg-names = "serdes", "siou";
#phy-cells = <4>;
};
rtc: rtc@ffa60000 {
compatible = "xlnx,zynqmp-rtc";
status = "disabled";
reg = <0x0 0xffa60000 0x0 0x100>;
interrupt-parent = <&gic>;
interrupts = <0 26 4>, <0 27 4>;
interrupt-names = "alarm", "sec";
calibration = <0x7FFF>;
};
sata: ahci@fd0c0000 {
compatible = "ceva,ahci-1v84";
status = "disabled";
reg = <0x0 0xfd0c0000 0x0 0x2000>;
interrupt-parent = <&gic>;
interrupts = <0 133 4>;
power-domains = <&zynqmp_firmware PD_SATA>;
resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
iommus = <&smmu 0x4c0>, <&smmu 0x4c1>,
<&smmu 0x4c2>, <&smmu 0x4c3>;
/* dma-coherent; */
};
sdhci0: mmc@ff160000 {
bootph-all;
compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 48 4>;
reg = <0x0 0xff160000 0x0 0x1000>;
clock-names = "clk_xin", "clk_ahb";
iommus = <&smmu 0x870>;
#clock-cells = <1>;
clock-output-names = "clk_out_sd0", "clk_in_sd0";
power-domains = <&zynqmp_firmware PD_SD_0>;
resets = <&zynqmp_reset ZYNQMP_RESET_SDIO0>;
};
sdhci1: mmc@ff170000 {
bootph-all;
compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 49 4>;
reg = <0x0 0xff170000 0x0 0x1000>;
clock-names = "clk_xin", "clk_ahb";
iommus = <&smmu 0x871>;
#clock-cells = <1>;
clock-output-names = "clk_out_sd1", "clk_in_sd1";
power-domains = <&zynqmp_firmware PD_SD_1>;
resets = <&zynqmp_reset ZYNQMP_RESET_SDIO1>;
};
smmu: iommu@fd800000 {
compatible = "arm,mmu-500";
reg = <0x0 0xfd800000 0x0 0x20000>;
#iommu-cells = <1>;
status = "disabled";
#global-interrupts = <1>;
interrupt-parent = <&gic>;
interrupts = <0 155 4>,
<0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
<0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
<0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
<0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>;
};
spi0: spi@ff040000 {
compatible = "cdns,spi-r1p6";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 19 4>;
reg = <0x0 0xff040000 0x0 0x1000>;
clock-names = "ref_clk", "pclk";
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&zynqmp_firmware PD_SPI_0>;
};
spi1: spi@ff050000 {
compatible = "cdns,spi-r1p6";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 20 4>;
reg = <0x0 0xff050000 0x0 0x1000>;
clock-names = "ref_clk", "pclk";
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&zynqmp_firmware PD_SPI_1>;
};
ttc0: timer@ff110000 {
compatible = "cdns,ttc";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
reg = <0x0 0xff110000 0x0 0x1000>;
timer-width = <32>;
power-domains = <&zynqmp_firmware PD_TTC_0>;
};
ttc1: timer@ff120000 {
compatible = "cdns,ttc";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
reg = <0x0 0xff120000 0x0 0x1000>;
timer-width = <32>;
power-domains = <&zynqmp_firmware PD_TTC_1>;
};
ttc2: timer@ff130000 {
compatible = "cdns,ttc";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
reg = <0x0 0xff130000 0x0 0x1000>;
timer-width = <32>;
power-domains = <&zynqmp_firmware PD_TTC_2>;
};
ttc3: timer@ff140000 {
compatible = "cdns,ttc";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
reg = <0x0 0xff140000 0x0 0x1000>;
timer-width = <32>;
power-domains = <&zynqmp_firmware PD_TTC_3>;
};
uart0: serial@ff000000 {
bootph-all;
compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 21 4>;
reg = <0x0 0xff000000 0x0 0x1000>;
clock-names = "uart_clk", "pclk";
power-domains = <&zynqmp_firmware PD_UART_0>;
};
uart1: serial@ff010000 {
bootph-all;
compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 22 4>;
reg = <0x0 0xff010000 0x0 0x1000>;
clock-names = "uart_clk", "pclk";
power-domains = <&zynqmp_firmware PD_UART_1>;
};
usb0: usb@ff9d0000 {
#address-cells = <2>;
#size-cells = <2>;
status = "disabled";
compatible = "xlnx,zynqmp-dwc3";
reg = <0x0 0xff9d0000 0x0 0x100>;
clock-names = "bus_clk", "ref_clk";
power-domains = <&zynqmp_firmware PD_USB_0>;
resets = <&zynqmp_reset ZYNQMP_RESET_USB0_CORERESET>,
<&zynqmp_reset ZYNQMP_RESET_USB0_HIBERRESET>,
<&zynqmp_reset ZYNQMP_RESET_USB0_APB>;
reset-names = "usb_crst", "usb_hibrst", "usb_apbrst";
reset-gpios = <&modepin_gpio 1 GPIO_ACTIVE_LOW>;
ranges;
dwc3_0: usb@fe200000 {
compatible = "snps,dwc3";
status = "disabled";
reg = <0x0 0xfe200000 0x0 0x40000>;
interrupt-parent = <&gic>;
interrupt-names = "dwc_usb3", "otg", "hiber";
interrupts = <0 65 4>, <0 69 4>, <0 75 4>;
iommus = <&smmu 0x860>;
snps,quirk-frame-length-adjustment = <0x20>;
clock-names = "ref";
snps,enable_guctl1_ipd_quirk;
snps,xhci-stream-quirk;
snps,resume-hs-terminations;
/* dma-coherent; */
};
};
usb1: usb@ff9e0000 {
#address-cells = <2>;
#size-cells = <2>;
status = "disabled";
compatible = "xlnx,zynqmp-dwc3";
reg = <0x0 0xff9e0000 0x0 0x100>;
clock-names = "bus_clk", "ref_clk";
power-domains = <&zynqmp_firmware PD_USB_1>;
resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>,
<&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>,
<&zynqmp_reset ZYNQMP_RESET_USB1_APB>;
reset-names = "usb_crst", "usb_hibrst", "usb_apbrst";
ranges;
dwc3_1: usb@fe300000 {
compatible = "snps,dwc3";
status = "disabled";
reg = <0x0 0xfe300000 0x0 0x40000>;
interrupt-parent = <&gic>;
interrupt-names = "dwc_usb3", "otg", "hiber";
interrupts = <0 70 4>, <0 74 4>, <0 76 4>;
iommus = <&smmu 0x861>;
snps,quirk-frame-length-adjustment = <0x20>;
clock-names = "ref";
snps,enable_guctl1_ipd_quirk;
snps,xhci-stream-quirk;
snps,resume-hs-terminations;
/* dma-coherent; */
};
};
watchdog0: watchdog@fd4d0000 {
compatible = "cdns,wdt-r1p2";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 113 1>;
reg = <0x0 0xfd4d0000 0x0 0x1000>;
timeout-sec = <60>;
reset-on-timeout;
};
lpd_watchdog: watchdog@ff150000 {
compatible = "cdns,wdt-r1p2";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 52 1>;
reg = <0x0 0xff150000 0x0 0x1000>;
timeout-sec = <10>;
};
xilinx_ams: ams@ffa50000 {
compatible = "xlnx,zynqmp-ams";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 56 4>;
reg = <0x0 0xffa50000 0x0 0x800>;
#address-cells = <1>;
#size-cells = <1>;
#io-channel-cells = <1>;
ranges = <0 0 0xffa50800 0x800>;
ams_ps: ams-ps@0 {
compatible = "xlnx,zynqmp-ams-ps";
status = "disabled";
reg = <0x0 0x400>;
};
ams_pl: ams-pl@400 {
compatible = "xlnx,zynqmp-ams-pl";
status = "disabled";
reg = <0x400 0x400>;
#address-cells = <1>;
#size-cells = <0>;
};
};
zynqmp_dpdma: dma-controller@fd4c0000 {
compatible = "xlnx,zynqmp-dpdma";
status = "disabled";
reg = <0x0 0xfd4c0000 0x0 0x1000>;
interrupts = <0 122 4>;
interrupt-parent = <&gic>;
clock-names = "axi_clk";
power-domains = <&zynqmp_firmware PD_DP>;
#dma-cells = <1>;
};
zynqmp_dpsub: display@fd4a0000 {
bootph-all;
compatible = "xlnx,zynqmp-dpsub-1.7";
status = "disabled";
reg = <0x0 0xfd4a0000 0x0 0x1000>,
<0x0 0xfd4aa000 0x0 0x1000>,
<0x0 0xfd4ab000 0x0 0x1000>,
<0x0 0xfd4ac000 0x0 0x1000>;
reg-names = "dp", "blend", "av_buf", "aud";
interrupts = <0 119 4>;
interrupt-parent = <&gic>;
clock-names = "dp_apb_clk", "dp_aud_clk",
"dp_vtc_pixel_clk_in";
power-domains = <&zynqmp_firmware PD_DP>;
resets = <&zynqmp_reset ZYNQMP_RESET_DP>;
dma-names = "vid0", "vid1", "vid2", "gfx0";
dmas = <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO0>,
<&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO1>,
<&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO2>,
<&zynqmp_dpdma ZYNQMP_DPDMA_GRAPHICS>;
};
};
};