mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
8e2c0ee3ba
Sync the devicetree files from the Linux kernel repo, v6.2-rc2. This is covering the 64-bit SoCs, from arch/arm64/boot/dts/allwinner. This enables GPU power management in the kernel for the H6, enables Bluetooth on the Pinebook, and adds USB to the H616 devices (just for newer Linux kernels at the moment, U-Boot support is pending). As before, this omits the non-backwards compatible changes to the R_INTC controller, to remain compatible with older kernels. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
1126 lines
28 KiB
Text
1126 lines
28 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
|
|
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/sun50i-h6-ccu.h>
|
|
#include <dt-bindings/clock/sun50i-h6-r-ccu.h>
|
|
#include <dt-bindings/clock/sun6i-rtc.h>
|
|
#include <dt-bindings/clock/sun8i-de2.h>
|
|
#include <dt-bindings/clock/sun8i-tcon-top.h>
|
|
#include <dt-bindings/reset/sun50i-h6-ccu.h>
|
|
#include <dt-bindings/reset/sun50i-h6-r-ccu.h>
|
|
#include <dt-bindings/reset/sun8i-de2.h>
|
|
#include <dt-bindings/thermal/thermal.h>
|
|
|
|
/ {
|
|
interrupt-parent = <&gic>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
compatible = "arm,cortex-a53";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
enable-method = "psci";
|
|
clocks = <&ccu CLK_CPUX>;
|
|
clock-latency-ns = <244144>; /* 8 32k periods */
|
|
#cooling-cells = <2>;
|
|
};
|
|
|
|
cpu1: cpu@1 {
|
|
compatible = "arm,cortex-a53";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
enable-method = "psci";
|
|
clocks = <&ccu CLK_CPUX>;
|
|
clock-latency-ns = <244144>; /* 8 32k periods */
|
|
#cooling-cells = <2>;
|
|
};
|
|
|
|
cpu2: cpu@2 {
|
|
compatible = "arm,cortex-a53";
|
|
device_type = "cpu";
|
|
reg = <2>;
|
|
enable-method = "psci";
|
|
clocks = <&ccu CLK_CPUX>;
|
|
clock-latency-ns = <244144>; /* 8 32k periods */
|
|
#cooling-cells = <2>;
|
|
};
|
|
|
|
cpu3: cpu@3 {
|
|
compatible = "arm,cortex-a53";
|
|
device_type = "cpu";
|
|
reg = <3>;
|
|
enable-method = "psci";
|
|
clocks = <&ccu CLK_CPUX>;
|
|
clock-latency-ns = <244144>; /* 8 32k periods */
|
|
#cooling-cells = <2>;
|
|
};
|
|
};
|
|
|
|
de: display-engine {
|
|
compatible = "allwinner,sun50i-h6-display-engine";
|
|
allwinner,pipelines = <&mixer0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
osc24M: osc24M_clk {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "osc24M";
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a53-pmu";
|
|
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
|
|
};
|
|
|
|
psci {
|
|
compatible = "arm,psci-0.2";
|
|
method = "smc";
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
arm,no-tick-in-suspend;
|
|
interrupts = <GIC_PPI 13
|
|
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
|
|
<GIC_PPI 14
|
|
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
|
|
<GIC_PPI 11
|
|
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
|
|
<GIC_PPI 10
|
|
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
};
|
|
|
|
soc {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
bus@1000000 {
|
|
compatible = "allwinner,sun50i-h6-de3",
|
|
"allwinner,sun50i-a64-de2";
|
|
reg = <0x1000000 0x400000>;
|
|
allwinner,sram = <&de2_sram 1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x1000000 0x400000>;
|
|
|
|
display_clocks: clock@0 {
|
|
compatible = "allwinner,sun50i-h6-de3-clk";
|
|
reg = <0x0 0x10000>;
|
|
clocks = <&ccu CLK_BUS_DE>,
|
|
<&ccu CLK_DE>;
|
|
clock-names = "bus",
|
|
"mod";
|
|
resets = <&ccu RST_BUS_DE>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
mixer0: mixer@100000 {
|
|
compatible = "allwinner,sun50i-h6-de3-mixer-0";
|
|
reg = <0x100000 0x100000>;
|
|
clocks = <&display_clocks CLK_BUS_MIXER0>,
|
|
<&display_clocks CLK_MIXER0>;
|
|
clock-names = "bus",
|
|
"mod";
|
|
resets = <&display_clocks RST_MIXER0>;
|
|
iommus = <&iommu 0>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
mixer0_out: port@1 {
|
|
reg = <1>;
|
|
|
|
mixer0_out_tcon_top_mixer0: endpoint {
|
|
remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
video-codec-g2@1c00000 {
|
|
compatible = "allwinner,sun50i-h6-vpu-g2";
|
|
reg = <0x01c00000 0x1000>;
|
|
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_VP9>, <&ccu CLK_VP9>;
|
|
clock-names = "bus", "mod";
|
|
resets = <&ccu RST_BUS_VP9>;
|
|
iommus = <&iommu 5>;
|
|
};
|
|
|
|
video-codec@1c0e000 {
|
|
compatible = "allwinner,sun50i-h6-video-engine";
|
|
reg = <0x01c0e000 0x2000>;
|
|
clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
|
|
<&ccu CLK_MBUS_VE>;
|
|
clock-names = "ahb", "mod", "ram";
|
|
resets = <&ccu RST_BUS_VE>;
|
|
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
|
|
allwinner,sram = <&ve_sram 1>;
|
|
iommus = <&iommu 3>;
|
|
};
|
|
|
|
gpu: gpu@1800000 {
|
|
compatible = "allwinner,sun50i-h6-mali",
|
|
"arm,mali-t720";
|
|
reg = <0x01800000 0x4000>;
|
|
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "job", "mmu", "gpu";
|
|
clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>;
|
|
clock-names = "core", "bus";
|
|
resets = <&ccu RST_BUS_GPU>;
|
|
#cooling-cells = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
crypto: crypto@1904000 {
|
|
compatible = "allwinner,sun50i-h6-crypto";
|
|
reg = <0x01904000 0x1000>;
|
|
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>, <&ccu CLK_MBUS_CE>;
|
|
clock-names = "bus", "mod", "ram";
|
|
resets = <&ccu RST_BUS_CE>;
|
|
};
|
|
|
|
syscon: syscon@3000000 {
|
|
compatible = "allwinner,sun50i-h6-system-control",
|
|
"allwinner,sun50i-a64-system-control";
|
|
reg = <0x03000000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
sram_c: sram@28000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0x00028000 0x1e000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x00028000 0x1e000>;
|
|
|
|
de2_sram: sram-section@0 {
|
|
compatible = "allwinner,sun50i-h6-sram-c",
|
|
"allwinner,sun50i-a64-sram-c";
|
|
reg = <0x0000 0x1e000>;
|
|
};
|
|
};
|
|
|
|
sram_c1: sram@1a00000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0x01a00000 0x200000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x01a00000 0x200000>;
|
|
|
|
ve_sram: sram-section@0 {
|
|
compatible = "allwinner,sun50i-h6-sram-c1",
|
|
"allwinner,sun4i-a10-sram-c1";
|
|
reg = <0x000000 0x200000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
ccu: clock@3001000 {
|
|
compatible = "allwinner,sun50i-h6-ccu";
|
|
reg = <0x03001000 0x1000>;
|
|
clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>;
|
|
clock-names = "hosc", "losc", "iosc";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
dma: dma-controller@3002000 {
|
|
compatible = "allwinner,sun50i-h6-dma";
|
|
reg = <0x03002000 0x1000>;
|
|
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
|
|
clock-names = "bus", "mbus";
|
|
dma-channels = <16>;
|
|
dma-requests = <46>;
|
|
resets = <&ccu RST_BUS_DMA>;
|
|
#dma-cells = <1>;
|
|
};
|
|
|
|
msgbox: mailbox@3003000 {
|
|
compatible = "allwinner,sun50i-h6-msgbox",
|
|
"allwinner,sun6i-a31-msgbox";
|
|
reg = <0x03003000 0x1000>;
|
|
clocks = <&ccu CLK_BUS_MSGBOX>;
|
|
resets = <&ccu RST_BUS_MSGBOX>;
|
|
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
|
|
#mbox-cells = <1>;
|
|
};
|
|
|
|
sid: efuse@3006000 {
|
|
compatible = "allwinner,sun50i-h6-sid";
|
|
reg = <0x03006000 0x400>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
ths_calibration: thermal-sensor-calibration@14 {
|
|
reg = <0x14 0x8>;
|
|
};
|
|
|
|
cpu_speed_grade: cpu-speed-grade@1c {
|
|
reg = <0x1c 0x4>;
|
|
};
|
|
};
|
|
|
|
timer@3009000 {
|
|
compatible = "allwinner,sun50i-h6-timer",
|
|
"allwinner,sun8i-a23-timer";
|
|
reg = <0x03009000 0xa0>;
|
|
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&osc24M>;
|
|
};
|
|
|
|
watchdog: watchdog@30090a0 {
|
|
compatible = "allwinner,sun50i-h6-wdt",
|
|
"allwinner,sun6i-a31-wdt";
|
|
reg = <0x030090a0 0x20>;
|
|
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&osc24M>;
|
|
/* Broken on some H6 boards */
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm: pwm@300a000 {
|
|
compatible = "allwinner,sun50i-h6-pwm";
|
|
reg = <0x0300a000 0x400>;
|
|
clocks = <&osc24M>, <&ccu CLK_BUS_PWM>;
|
|
clock-names = "mod", "bus";
|
|
resets = <&ccu RST_BUS_PWM>;
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pio: pinctrl@300b000 {
|
|
compatible = "allwinner,sun50i-h6-pinctrl";
|
|
reg = <0x0300b000 0x400>;
|
|
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>;
|
|
clock-names = "apb", "hosc", "losc";
|
|
gpio-controller;
|
|
#gpio-cells = <3>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
|
|
ext_rgmii_pins: rgmii-pins {
|
|
pins = "PD0", "PD1", "PD2", "PD3", "PD4",
|
|
"PD5", "PD7", "PD8", "PD9", "PD10",
|
|
"PD11", "PD12", "PD13", "PD19", "PD20";
|
|
function = "emac";
|
|
drive-strength = <40>;
|
|
};
|
|
|
|
hdmi_pins: hdmi-pins {
|
|
pins = "PH8", "PH9", "PH10";
|
|
function = "hdmi";
|
|
};
|
|
|
|
i2c0_pins: i2c0-pins {
|
|
pins = "PD25", "PD26";
|
|
function = "i2c0";
|
|
};
|
|
|
|
i2c1_pins: i2c1-pins {
|
|
pins = "PH5", "PH6";
|
|
function = "i2c1";
|
|
};
|
|
|
|
i2c2_pins: i2c2-pins {
|
|
pins = "PD23", "PD24";
|
|
function = "i2c2";
|
|
};
|
|
|
|
mmc0_pins: mmc0-pins {
|
|
pins = "PF0", "PF1", "PF2", "PF3",
|
|
"PF4", "PF5";
|
|
function = "mmc0";
|
|
drive-strength = <30>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
/omit-if-no-ref/
|
|
mmc1_pins: mmc1-pins {
|
|
pins = "PG0", "PG1", "PG2", "PG3",
|
|
"PG4", "PG5";
|
|
function = "mmc1";
|
|
drive-strength = <30>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
mmc2_pins: mmc2-pins {
|
|
pins = "PC1", "PC4", "PC5", "PC6",
|
|
"PC7", "PC8", "PC9", "PC10",
|
|
"PC11", "PC12", "PC13", "PC14";
|
|
function = "mmc2";
|
|
drive-strength = <30>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
/omit-if-no-ref/
|
|
spi0_pins: spi0-pins {
|
|
pins = "PC0", "PC2", "PC3";
|
|
function = "spi0";
|
|
};
|
|
|
|
/* pin shared with MMC2-CMD (eMMC) */
|
|
/omit-if-no-ref/
|
|
spi0_cs_pin: spi0-cs-pin {
|
|
pins = "PC5";
|
|
function = "spi0";
|
|
};
|
|
|
|
/omit-if-no-ref/
|
|
spi1_pins: spi1-pins {
|
|
pins = "PH4", "PH5", "PH6";
|
|
function = "spi1";
|
|
};
|
|
|
|
/omit-if-no-ref/
|
|
spi1_cs_pin: spi1-cs-pin {
|
|
pins = "PH3";
|
|
function = "spi1";
|
|
};
|
|
|
|
spdif_tx_pin: spdif-tx-pin {
|
|
pins = "PH7";
|
|
function = "spdif";
|
|
};
|
|
|
|
uart0_ph_pins: uart0-ph-pins {
|
|
pins = "PH0", "PH1";
|
|
function = "uart0";
|
|
};
|
|
|
|
uart1_pins: uart1-pins {
|
|
pins = "PG6", "PG7";
|
|
function = "uart1";
|
|
};
|
|
|
|
uart1_rts_cts_pins: uart1-rts-cts-pins {
|
|
pins = "PG8", "PG9";
|
|
function = "uart1";
|
|
};
|
|
};
|
|
|
|
gic: interrupt-controller@3021000 {
|
|
compatible = "arm,gic-400";
|
|
reg = <0x03021000 0x1000>,
|
|
<0x03022000 0x2000>,
|
|
<0x03024000 0x2000>,
|
|
<0x03026000 0x2000>;
|
|
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
};
|
|
|
|
iommu: iommu@30f0000 {
|
|
compatible = "allwinner,sun50i-h6-iommu";
|
|
reg = <0x030f0000 0x10000>;
|
|
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_IOMMU>;
|
|
resets = <&ccu RST_BUS_IOMMU>;
|
|
#iommu-cells = <1>;
|
|
};
|
|
|
|
mmc0: mmc@4020000 {
|
|
compatible = "allwinner,sun50i-h6-mmc",
|
|
"allwinner,sun50i-a64-mmc";
|
|
reg = <0x04020000 0x1000>;
|
|
clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
|
|
clock-names = "ahb", "mmc";
|
|
resets = <&ccu RST_BUS_MMC0>;
|
|
reset-names = "ahb";
|
|
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc0_pins>;
|
|
max-frequency = <150000000>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
mmc1: mmc@4021000 {
|
|
compatible = "allwinner,sun50i-h6-mmc",
|
|
"allwinner,sun50i-a64-mmc";
|
|
reg = <0x04021000 0x1000>;
|
|
clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
|
|
clock-names = "ahb", "mmc";
|
|
resets = <&ccu RST_BUS_MMC1>;
|
|
reset-names = "ahb";
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc1_pins>;
|
|
max-frequency = <150000000>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
mmc2: mmc@4022000 {
|
|
compatible = "allwinner,sun50i-h6-emmc",
|
|
"allwinner,sun50i-a64-emmc";
|
|
reg = <0x04022000 0x1000>;
|
|
clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
|
|
clock-names = "ahb", "mmc";
|
|
resets = <&ccu RST_BUS_MMC2>;
|
|
reset-names = "ahb";
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc2_pins>;
|
|
max-frequency = <150000000>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
uart0: serial@5000000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x05000000 0x400>;
|
|
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&ccu CLK_BUS_UART0>;
|
|
resets = <&ccu RST_BUS_UART0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@5000400 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x05000400 0x400>;
|
|
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&ccu CLK_BUS_UART1>;
|
|
resets = <&ccu RST_BUS_UART1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@5000800 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x05000800 0x400>;
|
|
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&ccu CLK_BUS_UART2>;
|
|
resets = <&ccu RST_BUS_UART2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@5000c00 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x05000c00 0x400>;
|
|
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&ccu CLK_BUS_UART3>;
|
|
resets = <&ccu RST_BUS_UART3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c0: i2c@5002000 {
|
|
compatible = "allwinner,sun50i-h6-i2c",
|
|
"allwinner,sun6i-a31-i2c";
|
|
reg = <0x05002000 0x400>;
|
|
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_I2C0>;
|
|
resets = <&ccu RST_BUS_I2C0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
i2c1: i2c@5002400 {
|
|
compatible = "allwinner,sun50i-h6-i2c",
|
|
"allwinner,sun6i-a31-i2c";
|
|
reg = <0x05002400 0x400>;
|
|
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_I2C1>;
|
|
resets = <&ccu RST_BUS_I2C1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
i2c2: i2c@5002800 {
|
|
compatible = "allwinner,sun50i-h6-i2c",
|
|
"allwinner,sun6i-a31-i2c";
|
|
reg = <0x05002800 0x400>;
|
|
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_I2C2>;
|
|
resets = <&ccu RST_BUS_I2C2>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c2_pins>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
spi0: spi@5010000 {
|
|
compatible = "allwinner,sun50i-h6-spi",
|
|
"allwinner,sun8i-h3-spi";
|
|
reg = <0x05010000 0x1000>;
|
|
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
|
|
clock-names = "ahb", "mod";
|
|
dmas = <&dma 22>, <&dma 22>;
|
|
dma-names = "rx", "tx";
|
|
resets = <&ccu RST_BUS_SPI0>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
spi1: spi@5011000 {
|
|
compatible = "allwinner,sun50i-h6-spi",
|
|
"allwinner,sun8i-h3-spi";
|
|
reg = <0x05011000 0x1000>;
|
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
|
|
clock-names = "ahb", "mod";
|
|
dmas = <&dma 23>, <&dma 23>;
|
|
dma-names = "rx", "tx";
|
|
resets = <&ccu RST_BUS_SPI1>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
emac: ethernet@5020000 {
|
|
compatible = "allwinner,sun50i-h6-emac",
|
|
"allwinner,sun50i-a64-emac";
|
|
syscon = <&syscon>;
|
|
reg = <0x05020000 0x10000>;
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "macirq";
|
|
resets = <&ccu RST_BUS_EMAC>;
|
|
reset-names = "stmmaceth";
|
|
clocks = <&ccu CLK_BUS_EMAC>;
|
|
clock-names = "stmmaceth";
|
|
status = "disabled";
|
|
|
|
mdio: mdio {
|
|
compatible = "snps,dwmac-mdio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
i2s1: i2s@5091000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "allwinner,sun50i-h6-i2s";
|
|
reg = <0x05091000 0x1000>;
|
|
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
|
|
clock-names = "apb", "mod";
|
|
dmas = <&dma 4>, <&dma 4>;
|
|
resets = <&ccu RST_BUS_I2S1>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spdif: spdif@5093000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "allwinner,sun50i-h6-spdif";
|
|
reg = <0x05093000 0x400>;
|
|
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
|
|
clock-names = "apb", "spdif";
|
|
resets = <&ccu RST_BUS_SPDIF>;
|
|
dmas = <&dma 2>;
|
|
dma-names = "tx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spdif_tx_pin>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb2otg: usb@5100000 {
|
|
compatible = "allwinner,sun50i-h6-musb",
|
|
"allwinner,sun8i-a33-musb";
|
|
reg = <0x05100000 0x0400>;
|
|
clocks = <&ccu CLK_BUS_OTG>;
|
|
resets = <&ccu RST_BUS_OTG>;
|
|
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "mc";
|
|
phys = <&usb2phy 0>;
|
|
phy-names = "usb";
|
|
extcon = <&usb2phy 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb2phy: phy@5100400 {
|
|
compatible = "allwinner,sun50i-h6-usb-phy";
|
|
reg = <0x05100400 0x24>,
|
|
<0x05101800 0x4>,
|
|
<0x05311800 0x4>;
|
|
reg-names = "phy_ctrl",
|
|
"pmu0",
|
|
"pmu3";
|
|
clocks = <&ccu CLK_USB_PHY0>,
|
|
<&ccu CLK_USB_PHY3>;
|
|
clock-names = "usb0_phy",
|
|
"usb3_phy";
|
|
resets = <&ccu RST_USB_PHY0>,
|
|
<&ccu RST_USB_PHY3>;
|
|
reset-names = "usb0_reset",
|
|
"usb3_reset";
|
|
status = "disabled";
|
|
#phy-cells = <1>;
|
|
};
|
|
|
|
ehci0: usb@5101000 {
|
|
compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
|
|
reg = <0x05101000 0x100>;
|
|
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_OHCI0>,
|
|
<&ccu CLK_BUS_EHCI0>,
|
|
<&ccu CLK_USB_OHCI0>;
|
|
resets = <&ccu RST_BUS_OHCI0>,
|
|
<&ccu RST_BUS_EHCI0>;
|
|
phys = <&usb2phy 0>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
ohci0: usb@5101400 {
|
|
compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
|
|
reg = <0x05101400 0x100>;
|
|
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_OHCI0>,
|
|
<&ccu CLK_USB_OHCI0>;
|
|
resets = <&ccu RST_BUS_OHCI0>;
|
|
phys = <&usb2phy 0>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
dwc3: usb@5200000 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x05200000 0x10000>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_XHCI>,
|
|
<&ccu CLK_BUS_XHCI>,
|
|
<&rtc CLK_OSC32K>;
|
|
clock-names = "ref", "bus_early", "suspend";
|
|
resets = <&ccu RST_BUS_XHCI>;
|
|
/*
|
|
* The datasheet of the chip doesn't declare the
|
|
* peripheral function, and there's no boards known
|
|
* to have a USB Type-B port routed to the port.
|
|
* In addition, no one has tested the peripheral
|
|
* function yet.
|
|
* So set the dr_mode to "host" in the DTSI file.
|
|
*/
|
|
dr_mode = "host";
|
|
phys = <&usb3phy>;
|
|
phy-names = "usb3-phy";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb3phy: phy@5210000 {
|
|
compatible = "allwinner,sun50i-h6-usb3-phy";
|
|
reg = <0x5210000 0x10000>;
|
|
clocks = <&ccu CLK_USB_PHY1>;
|
|
resets = <&ccu RST_USB_PHY1>;
|
|
#phy-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ehci3: usb@5311000 {
|
|
compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
|
|
reg = <0x05311000 0x100>;
|
|
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_OHCI3>,
|
|
<&ccu CLK_BUS_EHCI3>,
|
|
<&ccu CLK_USB_OHCI3>;
|
|
resets = <&ccu RST_BUS_OHCI3>,
|
|
<&ccu RST_BUS_EHCI3>;
|
|
phys = <&usb2phy 3>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
ohci3: usb@5311400 {
|
|
compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
|
|
reg = <0x05311400 0x100>;
|
|
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_OHCI3>,
|
|
<&ccu CLK_USB_OHCI3>;
|
|
resets = <&ccu RST_BUS_OHCI3>;
|
|
phys = <&usb2phy 3>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
hdmi: hdmi@6000000 {
|
|
compatible = "allwinner,sun50i-h6-dw-hdmi";
|
|
reg = <0x06000000 0x10000>;
|
|
reg-io-width = <1>;
|
|
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>,
|
|
<&ccu CLK_HDMI>, <&ccu CLK_HDMI_CEC>,
|
|
<&ccu CLK_HDCP>, <&ccu CLK_BUS_HDCP>;
|
|
clock-names = "iahb", "isfr", "tmds", "cec", "hdcp",
|
|
"hdcp-bus";
|
|
resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>;
|
|
reset-names = "ctrl", "hdcp";
|
|
phys = <&hdmi_phy>;
|
|
phy-names = "phy";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hdmi_pins>;
|
|
status = "disabled";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
hdmi_in: port@0 {
|
|
reg = <0>;
|
|
|
|
hdmi_in_tcon_top: endpoint {
|
|
remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
|
|
};
|
|
};
|
|
|
|
hdmi_out: port@1 {
|
|
reg = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
hdmi_phy: hdmi-phy@6010000 {
|
|
compatible = "allwinner,sun50i-h6-hdmi-phy";
|
|
reg = <0x06010000 0x10000>;
|
|
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>;
|
|
clock-names = "bus", "mod";
|
|
resets = <&ccu RST_BUS_HDMI>;
|
|
reset-names = "phy";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
tcon_top: tcon-top@6510000 {
|
|
compatible = "allwinner,sun50i-h6-tcon-top";
|
|
reg = <0x06510000 0x1000>;
|
|
clocks = <&ccu CLK_BUS_TCON_TOP>,
|
|
<&ccu CLK_TCON_TV0>;
|
|
clock-names = "bus",
|
|
"tcon-tv0";
|
|
clock-output-names = "tcon-top-tv0";
|
|
resets = <&ccu RST_BUS_TCON_TOP>;
|
|
#clock-cells = <1>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
tcon_top_mixer0_in: port@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
|
|
tcon_top_mixer0_in_mixer0: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&mixer0_out_tcon_top_mixer0>;
|
|
};
|
|
};
|
|
|
|
tcon_top_mixer0_out: port@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
|
|
tcon_top_mixer0_out_tcon_tv: endpoint@2 {
|
|
reg = <2>;
|
|
remote-endpoint = <&tcon_tv_in_tcon_top_mixer0>;
|
|
};
|
|
};
|
|
|
|
tcon_top_hdmi_in: port@4 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <4>;
|
|
|
|
tcon_top_hdmi_in_tcon_tv: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&tcon_tv_out_tcon_top>;
|
|
};
|
|
};
|
|
|
|
tcon_top_hdmi_out: port@5 {
|
|
reg = <5>;
|
|
|
|
tcon_top_hdmi_out_hdmi: endpoint {
|
|
remote-endpoint = <&hdmi_in_tcon_top>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tcon_tv: lcd-controller@6515000 {
|
|
compatible = "allwinner,sun50i-h6-tcon-tv",
|
|
"allwinner,sun8i-r40-tcon-tv";
|
|
reg = <0x06515000 0x1000>;
|
|
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_TCON_TV0>,
|
|
<&tcon_top CLK_TCON_TOP_TV0>;
|
|
clock-names = "ahb",
|
|
"tcon-ch1";
|
|
resets = <&ccu RST_BUS_TCON_TV0>;
|
|
reset-names = "lcd";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
tcon_tv_in: port@0 {
|
|
reg = <0>;
|
|
|
|
tcon_tv_in_tcon_top_mixer0: endpoint {
|
|
remote-endpoint = <&tcon_top_mixer0_out_tcon_tv>;
|
|
};
|
|
};
|
|
|
|
tcon_tv_out: port@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
|
|
tcon_tv_out_tcon_top: endpoint@1 {
|
|
reg = <1>;
|
|
remote-endpoint = <&tcon_top_hdmi_in_tcon_tv>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
rtc: rtc@7000000 {
|
|
compatible = "allwinner,sun50i-h6-rtc";
|
|
reg = <0x07000000 0x400>;
|
|
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-output-names = "osc32k", "osc32k-out", "iosc";
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
r_ccu: clock@7010000 {
|
|
compatible = "allwinner,sun50i-h6-r-ccu";
|
|
reg = <0x07010000 0x400>;
|
|
clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
|
|
<&ccu CLK_PLL_PERIPH0>;
|
|
clock-names = "hosc", "losc", "iosc", "pll-periph";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
r_watchdog: watchdog@7020400 {
|
|
compatible = "allwinner,sun50i-h6-wdt",
|
|
"allwinner,sun6i-a31-wdt";
|
|
reg = <0x07020400 0x20>;
|
|
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&osc24M>;
|
|
};
|
|
|
|
r_intc: interrupt-controller@7021000 {
|
|
compatible = "allwinner,sun50i-h6-r-intc",
|
|
"allwinner,sun6i-a31-r-intc";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x07021000 0x400>;
|
|
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
r_pio: pinctrl@7022000 {
|
|
compatible = "allwinner,sun50i-h6-r-pinctrl";
|
|
reg = <0x07022000 0x400>;
|
|
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&r_ccu CLK_R_APB1>, <&osc24M>,
|
|
<&rtc CLK_OSC32K>;
|
|
clock-names = "apb", "hosc", "losc";
|
|
gpio-controller;
|
|
#gpio-cells = <3>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
|
|
r_i2c_pins: r-i2c-pins {
|
|
pins = "PL0", "PL1";
|
|
function = "s_i2c";
|
|
};
|
|
|
|
r_ir_rx_pin: r-ir-rx-pin {
|
|
pins = "PL9";
|
|
function = "s_cir_rx";
|
|
};
|
|
|
|
r_rsb_pins: r-rsb-pins {
|
|
pins = "PL0", "PL1";
|
|
function = "s_rsb";
|
|
};
|
|
};
|
|
|
|
r_ir: ir@7040000 {
|
|
compatible = "allwinner,sun50i-h6-ir",
|
|
"allwinner,sun6i-a31-ir";
|
|
reg = <0x07040000 0x400>;
|
|
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&r_ccu CLK_R_APB1_IR>,
|
|
<&r_ccu CLK_IR>;
|
|
clock-names = "apb", "ir";
|
|
resets = <&r_ccu RST_R_APB1_IR>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&r_ir_rx_pin>;
|
|
status = "disabled";
|
|
};
|
|
|
|
r_i2c: i2c@7081400 {
|
|
compatible = "allwinner,sun50i-h6-i2c",
|
|
"allwinner,sun6i-a31-i2c";
|
|
reg = <0x07081400 0x400>;
|
|
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&r_ccu CLK_R_APB2_I2C>;
|
|
resets = <&r_ccu RST_R_APB2_I2C>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&r_i2c_pins>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
r_rsb: rsb@7083000 {
|
|
compatible = "allwinner,sun8i-a23-rsb";
|
|
reg = <0x07083000 0x400>;
|
|
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&r_ccu CLK_R_APB2_RSB>;
|
|
clock-frequency = <3000000>;
|
|
resets = <&r_ccu RST_R_APB2_RSB>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&r_rsb_pins>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
ths: thermal-sensor@5070400 {
|
|
compatible = "allwinner,sun50i-h6-ths";
|
|
reg = <0x05070400 0x100>;
|
|
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&ccu CLK_BUS_THS>;
|
|
clock-names = "bus";
|
|
resets = <&ccu RST_BUS_THS>;
|
|
nvmem-cells = <&ths_calibration>;
|
|
nvmem-cell-names = "calibration";
|
|
#thermal-sensor-cells = <1>;
|
|
};
|
|
};
|
|
|
|
thermal-zones {
|
|
cpu-thermal {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-sensors = <&ths 0>;
|
|
|
|
trips {
|
|
cpu_alert: cpu-alert {
|
|
temperature = <85000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
|
|
cpu-crit {
|
|
temperature = <100000>;
|
|
hysteresis = <0>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map0 {
|
|
trip = <&cpu_alert>;
|
|
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
};
|
|
|
|
gpu-thermal {
|
|
polling-delay-passive = <1000>;
|
|
polling-delay = <2000>;
|
|
thermal-sensors = <&ths 1>;
|
|
|
|
trips {
|
|
gpu_alert0: gpu-alert-0 {
|
|
temperature = <95000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
|
|
gpu_alert1: gpu-alert-1 {
|
|
temperature = <100000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
|
|
gpu_alert2: gpu-alert-2 {
|
|
temperature = <105000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
|
|
gpu-crit {
|
|
temperature = <115000>;
|
|
hysteresis = <0>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
// Forbid the GPU to go over 756MHz
|
|
map0 {
|
|
trip = <&gpu_alert0>;
|
|
cooling-device = <&gpu 1 THERMAL_NO_LIMIT>;
|
|
};
|
|
|
|
// Forbid the GPU to go over 624MHz
|
|
map1 {
|
|
trip = <&gpu_alert1>;
|
|
cooling-device = <&gpu 2 THERMAL_NO_LIMIT>;
|
|
};
|
|
|
|
// Forbid the GPU to go over 576MHz
|
|
map2 {
|
|
trip = <&gpu_alert2>;
|
|
cooling-device = <&gpu 3 THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|