mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
127e57c671
Update the H6 DT files from the Linux 5.12 release. The changes are minimal (many LED node renames), but also help to enable USB port 0 in U-Boot (later), enable the RSB device (not yet used in U-Boot), and also introduce an MMC frequency limit. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
334 lines
6.4 KiB
Text
334 lines
6.4 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io>
|
|
|
|
/dts-v1/;
|
|
|
|
#include "sun50i-h6.dtsi"
|
|
#include "sun50i-h6-cpu-opp.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
model = "Pine H64 model A";
|
|
compatible = "pine64,pine-h64", "allwinner,sun50i-h6";
|
|
|
|
aliases {
|
|
ethernet0 = &emac;
|
|
serial0 = &uart0;
|
|
spi0 = &spi0;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
ext_osc32k: ext_osc32k_clk {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "ext_osc32k";
|
|
};
|
|
|
|
hdmi_connector: connector {
|
|
compatible = "hdmi-connector";
|
|
type = "a";
|
|
ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
|
|
|
|
port {
|
|
hdmi_con_in: endpoint {
|
|
remote-endpoint = <&hdmi_out_con>;
|
|
};
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led-0 {
|
|
label = "pine-h64:green:heartbeat";
|
|
gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
|
|
};
|
|
|
|
led-1 {
|
|
label = "pine-h64:white:link";
|
|
gpios = <&r_pio 0 3 GPIO_ACTIVE_HIGH>; /* PL3 */
|
|
};
|
|
|
|
led-2 {
|
|
label = "pine-h64:blue:status";
|
|
gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
|
|
};
|
|
};
|
|
|
|
reg_gmac_3v3: gmac-3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc-gmac-3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
startup-delay-us = <100000>;
|
|
gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_usb_vbus: vbus {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "usb-vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
startup-delay-us = <100000>;
|
|
gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <®_dcdca>;
|
|
};
|
|
|
|
&de {
|
|
status = "okay";
|
|
};
|
|
|
|
&ehci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ehci3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&emac {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ext_rgmii_pins>;
|
|
phy-mode = "rgmii-id";
|
|
phy-handle = <&ext_rgmii_phy>;
|
|
phy-supply = <®_gmac_3v3>;
|
|
allwinner,rx-delay-ps = <200>;
|
|
allwinner,tx-delay-ps = <200>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gpu {
|
|
mali-supply = <®_dcdcc>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi_out {
|
|
hdmi_out_con: endpoint {
|
|
remote-endpoint = <&hdmi_con_in>;
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
ext_rgmii_phy: ethernet-phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
&mmc0 {
|
|
vmmc-supply = <®_cldo1>;
|
|
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
|
|
bus-width = <4>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc2 {
|
|
vmmc-supply = <®_cldo1>;
|
|
vqmmc-supply = <®_bldo2>;
|
|
non-removable;
|
|
cap-mmc-hw-reset;
|
|
mmc-hs200-1_8v;
|
|
bus-width = <8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&ohci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ohci3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pio {
|
|
vcc-pc-supply = <®_bldo2>;
|
|
vcc-pd-supply = <®_cldo1>;
|
|
vcc-pg-supply = <®_aldo1>;
|
|
};
|
|
|
|
&r_i2c {
|
|
status = "okay";
|
|
|
|
axp805: pmic@36 {
|
|
compatible = "x-powers,axp805", "x-powers,axp806";
|
|
reg = <0x36>;
|
|
interrupt-parent = <&r_intc>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
x-powers,self-working-mode;
|
|
|
|
regulators {
|
|
reg_aldo1: aldo1 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-pl";
|
|
};
|
|
|
|
reg_aldo2: aldo2 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-ac200";
|
|
regulator-enable-ramp-delay = <100000>;
|
|
};
|
|
|
|
reg_aldo3: aldo3 {
|
|
/* This regulator is connected with CLDO1 */
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-3v3-1";
|
|
};
|
|
|
|
reg_bldo1: bldo1 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc-bias-pll";
|
|
};
|
|
|
|
reg_bldo2: bldo2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc-efuse-pcie-hdmi-io";
|
|
};
|
|
|
|
reg_bldo3: bldo3 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc-dcxoio";
|
|
};
|
|
|
|
bldo4 {
|
|
/* unused */
|
|
};
|
|
|
|
reg_cldo1: cldo1 {
|
|
/* This regulator is connected with ALDO3 */
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-3v3-2";
|
|
};
|
|
|
|
reg_cldo2: cldo2 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-wifi-1";
|
|
};
|
|
|
|
reg_cldo3: cldo3 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-wifi-2";
|
|
};
|
|
|
|
reg_dcdca: dcdca {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <810000>;
|
|
regulator-max-microvolt = <1160000>;
|
|
regulator-ramp-delay = <2500>;
|
|
regulator-name = "vdd-cpu";
|
|
};
|
|
|
|
reg_dcdcc: dcdcc {
|
|
regulator-enable-ramp-delay = <32000>;
|
|
regulator-min-microvolt = <810000>;
|
|
regulator-max-microvolt = <1080000>;
|
|
regulator-ramp-delay = <2500>;
|
|
regulator-name = "vdd-gpu";
|
|
};
|
|
|
|
reg_dcdcd: dcdcd {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <960000>;
|
|
regulator-max-microvolt = <960000>;
|
|
regulator-name = "vdd-sys";
|
|
};
|
|
|
|
reg_dcdce: dcdce {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-name = "vcc-dram";
|
|
};
|
|
|
|
sw {
|
|
/* unused */
|
|
};
|
|
};
|
|
};
|
|
|
|
pcf8563: rtc@51 {
|
|
compatible = "nxp,pcf8563";
|
|
reg = <0x51>;
|
|
interrupt-parent = <&r_intc>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
#clock-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&r_ir {
|
|
status = "okay";
|
|
};
|
|
|
|
&r_pio {
|
|
vcc-pm-supply = <®_aldo1>;
|
|
};
|
|
|
|
&rtc {
|
|
clocks = <&ext_osc32k>;
|
|
};
|
|
|
|
/*
|
|
* The CS pin is shared with the MMC2 CMD pin, so we cannot have the SPI
|
|
* flash and eMMC at the same time, as one of them would fail probing.
|
|
* Disable SPI0 in here, to prefer the more useful eMMC. U-Boot can
|
|
* fix this up in no eMMC is connected.
|
|
*/
|
|
&spi0 {
|
|
pinctrl-0 = <&spi0_pins>, <&spi0_cs_pin>;
|
|
pinctrl-names = "default";
|
|
status = "disabled";
|
|
|
|
flash@0 {
|
|
compatible = "winbond,w25q128", "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <4000000>;
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_ph_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2otg {
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2phy {
|
|
usb0_vbus-supply = <®_usb_vbus>;
|
|
usb3_vbus-supply = <®_usb_vbus>;
|
|
status = "okay";
|
|
};
|