mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 19:10:13 +00:00
ce00370b87
Copy the devicetree source for the H6 SoC and all existing boards from the Linux v5.18-rc1 tag. To maintain ABI compatibility with existing LTS kernels, one change moving some IP blocks to the r_intc interrupt controller is excluded. This effectively reverts Linux commits 189bef235dd3 and 73088dfee635. This commit also adds the following new board devicetrees: - sun50i-h6-pine-h64-model-b.dts - sun50i-h6-tanix-tx6-mini.dts This update should not impact any existing U-Boot functionality. Signed-off-by: Samuel Holland <samuel@sholland.org>
268 lines
5.1 KiB
Text
268 lines
5.1 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
// Copyright (C) 2018 Amarula Solutions
|
|
// Author: Jagan Teki <jagan@amarulasolutions.com>
|
|
|
|
/dts-v1/;
|
|
|
|
#include "sun50i-h6.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
model = "OrangePi One Plus";
|
|
compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
connector {
|
|
compatible = "hdmi-connector";
|
|
type = "a";
|
|
ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
|
|
|
|
port {
|
|
hdmi_con_in: endpoint {
|
|
remote-endpoint = <&hdmi_out_con>;
|
|
};
|
|
};
|
|
};
|
|
|
|
ext_osc32k: ext_osc32k_clk {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "ext_osc32k";
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led-0 {
|
|
label = "orangepi:red:power";
|
|
gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
|
|
default-state = "on";
|
|
};
|
|
|
|
led-1 {
|
|
label = "orangepi:green:status";
|
|
gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
|
|
};
|
|
};
|
|
|
|
reg_vcc5v: vcc5v {
|
|
/* board wide 5V supply directly from the DC jack */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc-5v";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
|
|
&de {
|
|
status = "okay";
|
|
};
|
|
|
|
&ehci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ehci3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpu {
|
|
mali-supply = <®_dcdcc>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi_out {
|
|
hdmi_out_con: endpoint {
|
|
remote-endpoint = <&hdmi_con_in>;
|
|
};
|
|
};
|
|
|
|
&mmc0 {
|
|
vmmc-supply = <®_cldo1>;
|
|
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
|
|
bus-width = <4>;
|
|
status = "okay";
|
|
};
|
|
|
|
&ohci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ohci3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pio {
|
|
vcc-pc-supply = <®_bldo2>;
|
|
vcc-pd-supply = <®_cldo1>;
|
|
vcc-pg-supply = <®_aldo1>;
|
|
};
|
|
|
|
&r_ir {
|
|
status = "okay";
|
|
};
|
|
|
|
&r_pio {
|
|
vcc-pm-supply = <®_bldo3>;
|
|
};
|
|
|
|
&r_rsb {
|
|
status = "okay";
|
|
|
|
axp805: pmic@745 {
|
|
compatible = "x-powers,axp805", "x-powers,axp806";
|
|
reg = <0x745>;
|
|
interrupt-parent = <&r_intc>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
x-powers,self-working-mode;
|
|
vina-supply = <®_vcc5v>;
|
|
vinb-supply = <®_vcc5v>;
|
|
vinc-supply = <®_vcc5v>;
|
|
vind-supply = <®_vcc5v>;
|
|
vine-supply = <®_vcc5v>;
|
|
aldoin-supply = <®_vcc5v>;
|
|
bldoin-supply = <®_vcc5v>;
|
|
cldoin-supply = <®_vcc5v>;
|
|
|
|
regulators {
|
|
reg_aldo1: aldo1 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-pl";
|
|
};
|
|
|
|
reg_aldo2: aldo2 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-ac200";
|
|
};
|
|
|
|
reg_aldo3: aldo3 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc25-dram";
|
|
};
|
|
|
|
reg_bldo1: bldo1 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc-bias-pll";
|
|
};
|
|
|
|
reg_bldo2: bldo2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc-efuse-pcie-hdmi-io";
|
|
};
|
|
|
|
reg_bldo3: bldo3 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc-dcxoio";
|
|
};
|
|
|
|
bldo4 {
|
|
/* unused */
|
|
};
|
|
|
|
reg_cldo1: cldo1 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-3v3";
|
|
};
|
|
|
|
reg_cldo2: cldo2 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-wifi-1";
|
|
};
|
|
|
|
reg_cldo3: cldo3 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-wifi-2";
|
|
};
|
|
|
|
reg_dcdca: dcdca {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <810000>;
|
|
regulator-max-microvolt = <1080000>;
|
|
regulator-name = "vdd-cpu";
|
|
};
|
|
|
|
reg_dcdcc: dcdcc {
|
|
regulator-enable-ramp-delay = <32000>;
|
|
regulator-min-microvolt = <810000>;
|
|
regulator-max-microvolt = <1080000>;
|
|
regulator-name = "vdd-gpu";
|
|
};
|
|
|
|
reg_dcdcd: dcdcd {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <960000>;
|
|
regulator-max-microvolt = <960000>;
|
|
regulator-name = "vdd-sys";
|
|
};
|
|
|
|
reg_dcdce: dcdce {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-name = "vcc-dram";
|
|
};
|
|
|
|
sw {
|
|
/* unused */
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&rtc {
|
|
clocks = <&ext_osc32k>;
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_ph_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2otg {
|
|
/*
|
|
* OrangePi Lite 2 and One Plus, where this DT is used, don't
|
|
* have a controllable VBUS even though they do have an ID pin.
|
|
* Using it as anything but a USB host is unsafe.
|
|
*/
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2phy {
|
|
usb0_id_det-gpios = <&pio 2 6 GPIO_ACTIVE_HIGH>; /* PC6 */
|
|
usb0_vbus-supply = <®_vcc5v>;
|
|
usb3_vbus-supply = <®_vcc5v>;
|
|
status = "okay";
|
|
};
|