mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
08002ffd08
Device tree alignment with Linux kernel v6.3: - f5a058023239 - ARM: dts: stm32: add i2c nodes into stm32mp131.dtsi - 8539ebb435a5 - ARM: dts: stm32: enable i2c1 and i2c5 on stm32mp135f-dk.dts - 8539ebb435a5 - ARM: dts: stm32: add spi nodes into stm32mp131.dtsi - 15f72e0da4da - ARM: dts: stm32: add pinctrl and disabled spi5 node in stm32mp135f-dk - ea99a5a02ebc - ARM: dts: stm32: Create separate pinmux for qspi cs pin in stm32mp15-pinctrl.dtsi - a306d8962a24 - ARM: dts: stm32: Rename mdio0 to mdio - 0a5ebb1f3367 - ARM: dts: stm32: Replace SAI format with dai-format DT property - ccdab19738a6 - ARM: dts: stm32: add adc support to stm32mp13 - 022932ab55fd - ARM: dts: stm32: add adc pins muxing on stm32mp135f-dk - ab2806ddad9d - ARM: dts: stm32: add dummy vdd_adc regulator on stm32mp135f-dk - e46a180c060f - ARM: dts: stm32: add adc support on stm32mp135f-dk - 9ebf215fbae1 - ARM: dts: stm32: add PWR fixed regulators on stm32mp131 - 16f4ff60519a - ARM: dts: stm32: add USBPHYC and dual USB HS PHY support on stm32mp131 - 4a47f0f3e936 - ARM: dts: stm32: add UBSH EHCI and OHCI support on stm32mp131 - 2a46bb66c47f - ARM: dts: stm32: add USB OTG HS support on stm32mp131 - 9ebf215fbae1 - ARM: dts: stm32: add fixed regulators to support usb on stm32mp135f-dk - 16f4ff60519a - ARM: dts: stm32: enable USB HS phys on stm32mp135f-dk - c4e7254cf6dc - ARM: dts: stm32: enable USB Host EHCI on stm32mp135f-dk - 44978e135916 - ARM: dts: stm32: add pins for stm32g0 typec controller on stm32mp13 - 4f532403b1e5 - ARM: dts: stm32: enable USB OTG in dual role mode on stm32mp135f-dk - e1f15571c96c - ARM: dts: stm32: add mcp23017 pinctrl entry for stm32mp13 - 6cc71374002e - ARM: dts: stm32: add mcp23017 IO expander on I2C1 on stm32mp135f-dk - 7ffd2266bd32 - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcor-som - 21d83512bf2b - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcom-som - 732dbcf52f74 - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp151a-prtt1l - 003b7c6b24f4 - ARM: dts: stm32: remove sai kernel clock on stm32mp15xx-dkx - f2b17b39bfff - ARM: dts: stm32: rename sound card on stm32mp15xx-dkx - dee3cb759d3d - ARM: dts: stm32: Remove the pins-are-numbered property - ae8cf3b48727 - ARM: dts: stm32: add i2s nodes on stm32mp131 - 619746a27bd0 - ARM: dts: stm32: add sai nodes on stm32mp131 - c5e05d08ef90 - ARM: dts: stm32: add spdifrx node on stm32mp131 - 0a5afd3ee0d0 - ARM: dts: stm32: add dfsdm node on stm32mp131 - bf9d876bea2e - ARM: dts: stm32: add timers support on stm32mp131 - a3183748371d - ARM: dts: stm32: add timer pins muxing for stm32mp135f-dk - a9060c1326bc - ARM: dts: stm32: add timers support on stm32mp135f-dk - a12154058f75 - ARM: dts: stm32: Fix User button on stm32mp135f-dk - 2f33df889e99 - ARM: dts: stm32: Use new media bus type macros - 366384e49551 - ARM: dts: stm32: Update part number NVMEM description on stm32mp131 Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
221 lines
4.6 KiB
Text
221 lines
4.6 KiB
Text
// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
|
|
/*
|
|
* Copyright (C) Linaro Ltd 2019 - All Rights Reserved
|
|
* Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
* Copyright (C) 2020 Marek Vasut <marex@denx.de>
|
|
*/
|
|
|
|
#include "stm32mp15-pinctrl.dtsi"
|
|
#include "stm32mp15xxac-pinctrl.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/mfd/st,stpmic1.h>
|
|
|
|
/ {
|
|
aliases {
|
|
spi0 = &qspi;
|
|
};
|
|
|
|
memory@c0000000 {
|
|
device_type = "memory";
|
|
reg = <0xc0000000 0x40000000>;
|
|
};
|
|
};
|
|
|
|
&crc1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&dts {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c4_pins_a>;
|
|
i2c-scl-rising-time-ns = <185>;
|
|
i2c-scl-falling-time-ns = <20>;
|
|
status = "okay";
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
|
|
pmic: stpmic@33 {
|
|
compatible = "st,stpmic1";
|
|
reg = <0x33>;
|
|
interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
status = "okay";
|
|
|
|
regulators {
|
|
compatible = "st,stpmic1-regulators";
|
|
|
|
ldo1-supply = <&v3v3>;
|
|
ldo2-supply = <&v3v3>;
|
|
ldo3-supply = <&vdd_ddr>;
|
|
ldo5-supply = <&v3v3>;
|
|
ldo6-supply = <&v3v3>;
|
|
pwr_sw1-supply = <&bst_out>;
|
|
pwr_sw2-supply = <&bst_out>;
|
|
|
|
vddcore: buck1 {
|
|
regulator-name = "vddcore";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-initial-mode = <0>;
|
|
regulator-over-current-protection;
|
|
};
|
|
|
|
vdd_ddr: buck2 {
|
|
regulator-name = "vdd_ddr";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-initial-mode = <0>;
|
|
regulator-over-current-protection;
|
|
};
|
|
|
|
vdd: buck3 {
|
|
regulator-name = "vdd";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-initial-mode = <0>;
|
|
regulator-over-current-protection;
|
|
};
|
|
|
|
v3v3: buck4 {
|
|
regulator-name = "v3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-over-current-protection;
|
|
regulator-initial-mode = <0>;
|
|
};
|
|
|
|
vdda: ldo1 {
|
|
regulator-name = "vdda";
|
|
regulator-min-microvolt = <2900000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
interrupts = <IT_CURLIM_LDO1 0>;
|
|
};
|
|
|
|
v2v8: ldo2 {
|
|
regulator-name = "v2v8";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
interrupts = <IT_CURLIM_LDO2 0>;
|
|
};
|
|
|
|
vtt_ddr: ldo3 {
|
|
regulator-name = "vtt_ddr";
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <750000>;
|
|
regulator-always-on;
|
|
regulator-over-current-protection;
|
|
};
|
|
|
|
vdd_usb: ldo4 {
|
|
regulator-name = "vdd_usb";
|
|
interrupts = <IT_CURLIM_LDO4 0>;
|
|
};
|
|
|
|
vdd_sd: ldo5 {
|
|
regulator-name = "vdd_sd";
|
|
regulator-min-microvolt = <2900000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
interrupts = <IT_CURLIM_LDO5 0>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
v1v8: ldo6 {
|
|
regulator-name = "v1v8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
interrupts = <IT_CURLIM_LDO6 0>;
|
|
regulator-enable-ramp-delay = <300000>;
|
|
};
|
|
|
|
vref_ddr: vref_ddr {
|
|
regulator-name = "vref_ddr";
|
|
regulator-always-on;
|
|
};
|
|
|
|
bst_out: boost {
|
|
regulator-name = "bst_out";
|
|
interrupts = <IT_OCP_BOOST 0>;
|
|
};
|
|
|
|
vbus_otg: pwr_sw1 {
|
|
regulator-name = "vbus_otg";
|
|
interrupts = <IT_OCP_OTG 0>;
|
|
regulator-active-discharge = <1>;
|
|
};
|
|
|
|
vbus_sw: pwr_sw2 {
|
|
regulator-name = "vbus_sw";
|
|
interrupts = <IT_OCP_SWOUT 0>;
|
|
regulator-active-discharge = <1>;
|
|
};
|
|
};
|
|
|
|
onkey {
|
|
compatible = "st,stpmic1-onkey";
|
|
interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
|
|
interrupt-names = "onkey-falling", "onkey-rising";
|
|
status = "okay";
|
|
};
|
|
|
|
watchdog {
|
|
compatible = "st,stpmic1-wdt";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
eeprom@53 {
|
|
compatible = "atmel,24c02";
|
|
reg = <0x53>;
|
|
pagesize = <16>;
|
|
};
|
|
};
|
|
|
|
&iwdg2 {
|
|
timeout-sec = <32>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pwr_regulators {
|
|
vdd-supply = <&vdd>;
|
|
vdd_3v3_usbfs-supply = <&vdd_usb>;
|
|
};
|
|
|
|
&qspi {
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&qspi_clk_pins_a
|
|
&qspi_bk1_pins_a
|
|
&qspi_cs1_pins_a>;
|
|
pinctrl-1 = <&qspi_clk_sleep_pins_a
|
|
&qspi_bk1_sleep_pins_a
|
|
&qspi_cs1_sleep_pins_a>;
|
|
reg = <0x58003000 0x1000>, <0x70000000 0x200000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "okay";
|
|
|
|
flash0: flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-rx-bus-width = <4>;
|
|
spi-max-frequency = <50000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
};
|
|
};
|
|
|
|
&rng1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&rtc {
|
|
status = "okay";
|
|
};
|