mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
6cd6ed9da5
Add Radxa ROCK 3 Model A support. sync rk3308-rock-pi-s.dts from Linux 6.2.0-rc7. ROCK Pi S is RK3308 based SBC from radxa.com. ROCK Pi S has a, - 256MB/512MB DDR3 RAM - SD, NAND flash (optional on board 1/2/4/8Gb) - 100MB ethernet, PoE (optional) - Onboard 802.11 b/g/n wifi + Bluetooth 4.0 Module - USB2.0 Type-A HOST x1 - USB3.0 Type-C OTG x1 - 26-pin expansion header - USB Type-C DC 5V Power Supply Linux commit commit for the same, <2e04c25b1320> ("arm64: dts: rockchip: add ROCK Pi S DTS support") Signed-off-by: Akash Gajjar <gajjar04akash@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
228 lines
4.5 KiB
Text
228 lines
4.5 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
|
|
* Copyright (C) 2023 Akash Gajjar <gajjar04akash@gmail.com>
|
|
* Copyright (c) 2023 Jagan Teki <jagan@openedev.com>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/input/input.h>
|
|
#include "rk3308.dtsi"
|
|
|
|
/ {
|
|
model = "Radxa ROCK Pi S";
|
|
compatible = "radxa,rockpis", "rockchip,rk3308";
|
|
|
|
aliases {
|
|
ethernet0 = &mac;
|
|
mmc0 = &emmc;
|
|
mmc1 = &sdmmc;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:1500000n8";
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&green_led_gio>, <&heartbeat_led_gpio>;
|
|
|
|
green-led {
|
|
default-state = "on";
|
|
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
|
label = "rockpis:green:power";
|
|
linux,default-trigger = "default-on";
|
|
};
|
|
|
|
blue-led {
|
|
default-state = "on";
|
|
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
|
label = "rockpis:blue:user";
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
};
|
|
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
pinctrl-0 = <&wifi_enable_h>;
|
|
pinctrl-names = "default";
|
|
reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
vcc_1v8: vcc-1v8 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_1v8";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vcc_io>;
|
|
};
|
|
|
|
vcc_io: vcc-io {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_io";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
vcc_ddr: vcc-ddr {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_ddr";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
vcc5v0_otg: vcc5v0-otg {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&otg_vbus_drv>;
|
|
regulator-name = "vcc5v0_otg";
|
|
regulator-always-on;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
vcc5v0_sys: vcc5v0-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
};
|
|
|
|
vdd_core: vdd-core {
|
|
compatible = "pwm-regulator";
|
|
pwms = <&pwm0 0 5000 1>;
|
|
pwm-supply = <&vcc5v0_sys>;
|
|
regulator-name = "vdd_core";
|
|
regulator-min-microvolt = <827000>;
|
|
regulator-max-microvolt = <1340000>;
|
|
regulator-init-microvolt = <1015000>;
|
|
regulator-settling-time-up-us = <250>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vdd_log: vdd-log {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vdd_log";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1050000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <&vdd_core>;
|
|
};
|
|
|
|
&emmc {
|
|
bus-width = <4>;
|
|
cap-mmc-highspeed;
|
|
mmc-hs200-1_8v;
|
|
non-removable;
|
|
vmmc-supply = <&vcc_io>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mac {
|
|
clock_in_out = "output";
|
|
phy-supply = <&vcc_io>;
|
|
snps,reset-gpio = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
|
|
snps,reset-active-low;
|
|
snps,reset-delays-us = <0 50000 50000>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rtc_32k>;
|
|
|
|
leds {
|
|
green_led_gio: green-led-gpio {
|
|
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
heartbeat_led_gpio: heartbeat-led-gpio {
|
|
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
usb {
|
|
otg_vbus_drv: otg-vbus-drv {
|
|
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
sdio-pwrseq {
|
|
wifi_enable_h: wifi-enable-h {
|
|
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
wifi_host_wake: wifi-host-wake {
|
|
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwm0 {
|
|
status = "okay";
|
|
pinctrl-0 = <&pwm0_pin_pull_down>;
|
|
};
|
|
|
|
&saradc {
|
|
vref-supply = <&vcc_1v8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cap-sd-highspeed;
|
|
cap-sdio-irq;
|
|
keep-power-in-suspend;
|
|
max-frequency = <1000000>;
|
|
mmc-pwrseq = <&sdio_pwrseq>;
|
|
non-removable;
|
|
sd-uhs-sdr104;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc {
|
|
cap-sd-highspeed;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart4 {
|
|
status = "okay";
|
|
|
|
bluetooth {
|
|
compatible = "realtek,rtl8723bs-bt";
|
|
device-wake-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
|
|
host-wake-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
&wdt {
|
|
status = "okay";
|
|
};
|