mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 19:10:13 +00:00
bc4adc97cf
This patch adds general board files based on MT7988 SoCs. MT7988 uses one mmc controller for booting from both SD and eMMC, and the pins of mmc controller booting from SD are also shared with one of spi controllers. So two configs are need for these boot types: 1. mt7988_rfb_defconfig - SPI-NOR, SPI-NAND and eMMC 2. mt7988_sd_rfb_defconfig - SPI-NAND and SD Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
134 lines
2.1 KiB
Text
134 lines
2.1 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2022 MediaTek Inc.
|
|
* Author: Sam Shih <sam.shih@mediatek.com>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "mt7988.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
model = "mt7988-rfb";
|
|
compatible = "mediatek,mt7988-rfb", "mediatek,mt7988-sd-rfb";
|
|
|
|
chosen {
|
|
stdout-path = &uart0;
|
|
};
|
|
|
|
memory@40000000 {
|
|
device_type = "memory";
|
|
reg = <0 0x40000000 0 0x10000000>;
|
|
};
|
|
|
|
reg_3p3v: regulator-3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
ð {
|
|
status = "okay";
|
|
mediatek,gmac-id = <0>;
|
|
phy-mode = "usxgmii";
|
|
mediatek,switch = "mt7988";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
|
|
&pinctrl {
|
|
i2c1_pins: i2c1-pins {
|
|
mux {
|
|
function = "i2c";
|
|
groups = "i2c1_0";
|
|
};
|
|
};
|
|
|
|
pwm_pins: pwm-pins {
|
|
mux {
|
|
function = "pwm";
|
|
groups = "pwm0", "pwm1", "pwm2", "pwm3", "pwm4",
|
|
"pwm5", "pwm6", "pwm7";
|
|
};
|
|
};
|
|
|
|
spi0_pins: spi0-pins {
|
|
mux {
|
|
function = "spi";
|
|
groups = "spi0", "spi0_wp_hold";
|
|
};
|
|
};
|
|
|
|
mmc1_pins_default: mmc1default {
|
|
mux {
|
|
function = "flash";
|
|
groups = "emmc_45";
|
|
};
|
|
|
|
conf-cmd-dat {
|
|
pins = "SPI2_CSB", "SPI2_MISO", "SPI2_MOSI",
|
|
"SPI2_CLK", "SPI2_HOLD";
|
|
input-enable;
|
|
};
|
|
|
|
conf-clk {
|
|
pins = "SPI2_WP";
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwm {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&spi0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi0_pins>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "okay";
|
|
must_tx;
|
|
enhance_timing;
|
|
dma_ext;
|
|
ipm_design;
|
|
support_quad;
|
|
tick_dly = <2>;
|
|
sample_sel = <0>;
|
|
|
|
spi_nand@0 {
|
|
compatible = "spi-nand";
|
|
reg = <0>;
|
|
spi-max-frequency = <52000000>;
|
|
};
|
|
};
|
|
|
|
&mmc0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc1_pins_default>;
|
|
max-frequency = <52000000>;
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
vmmc-supply = <®_3p3v>;
|
|
vqmmc-supply = <®_3p3v>;
|
|
status = "okay";
|
|
};
|