mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
2e8d47c641
Import Amlogic DT changes from Linux commit 7d2a07b76933 ("Linux 5.14"), dt-bindings clock changes and new meson-g12b-gsking-x.dts, meson-sm1-bananapi-m5 & odroid-hc4 boards. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
319 lines
6.5 KiB
Text
319 lines
6.5 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2018 BayLibre, SAS.
|
|
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
|
* Author: Jerome Brunet <jbrunet@baylibre.com>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/sound/meson-aiu.h>
|
|
|
|
#include "meson-gxl-s805x.dtsi"
|
|
|
|
/ {
|
|
compatible = "libretech,aml-s805x-ac", "amlogic,s805x",
|
|
"amlogic,meson-gxl";
|
|
model = "Libre Computer AML-S805X-AC";
|
|
|
|
aliases {
|
|
serial0 = &uart_AO;
|
|
ethernet0 = ðmac;
|
|
spi0 = &spifc;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
cvbs-connector {
|
|
/*
|
|
* The pads are present but no connector is soldered on
|
|
* 2J2, so keep this off by default.
|
|
*/
|
|
status = "disabled";
|
|
compatible = "composite-video-connector";
|
|
|
|
port {
|
|
cvbs_connector_in: endpoint {
|
|
remote-endpoint = <&cvbs_vdac_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
dc_5v: regulator-dc_5v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "DC_5V";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
emmc_pwrseq: emmc-pwrseq {
|
|
compatible = "mmc-pwrseq-emmc";
|
|
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
hdmi-connector {
|
|
compatible = "hdmi-connector";
|
|
type = "a";
|
|
|
|
port {
|
|
hdmi_connector_in: endpoint {
|
|
remote-endpoint = <&hdmi_tx_tmds_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x0 0x0 0x20000000>;
|
|
};
|
|
|
|
vcck: regulator-vcck {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VCCK";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&dc_5v>;
|
|
|
|
/*
|
|
* This is controlled by GPIOAO_9 we reserve this but
|
|
* claiming it as done below reset the board anyway
|
|
* Need to investigate this
|
|
*
|
|
* gpio = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
|
|
* enable-active-high;
|
|
*/
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcc_3v3: regulator-vcc_3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VCC_3V3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&dc_5v>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vddio_ao18: regulator-vddio_ao18 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VDDIO_AO18";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vcc_3v3>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vddio_boot: regulator-vddio_boot {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VDDIO_BOOT";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vcc_3v3>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
sound {
|
|
compatible = "amlogic,gx-sound-card";
|
|
model = "LIBRETECH-AC";
|
|
audio-widgets = "Speaker", "9J5-3 LEFT",
|
|
"Speaker", "9J5-2 RIGHT";
|
|
audio-routing = "9J5-3 LEFT", "ACODEC LOLN",
|
|
"9J5-2 RIGHT", "ACODEC LORN";
|
|
assigned-clocks = <&clkc CLKID_MPLL0>,
|
|
<&clkc CLKID_MPLL1>,
|
|
<&clkc CLKID_MPLL2>;
|
|
assigned-clock-parents = <0>, <0>, <0>;
|
|
assigned-clock-rates = <294912000>,
|
|
<270950400>,
|
|
<393216000>;
|
|
status = "okay";
|
|
|
|
dai-link-0 {
|
|
sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
|
|
};
|
|
|
|
dai-link-1 {
|
|
sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
|
|
dai-format = "i2s";
|
|
mclk-fs = <256>;
|
|
|
|
codec-0 {
|
|
sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
|
|
};
|
|
|
|
codec-1 {
|
|
sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
|
|
};
|
|
};
|
|
|
|
dai-link-2 {
|
|
sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
|
|
|
|
codec-0 {
|
|
sound-dai = <&hdmi_tx>;
|
|
};
|
|
};
|
|
|
|
dai-link-3 {
|
|
sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
|
|
|
|
codec-0 {
|
|
sound-dai = <&acodec>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&acodec {
|
|
AVDD-supply = <&vddio_ao18>;
|
|
status = "okay";
|
|
};
|
|
|
|
&aiu {
|
|
status = "okay";
|
|
};
|
|
|
|
&cec_AO {
|
|
status = "okay";
|
|
pinctrl-0 = <&ao_cec_pins>;
|
|
pinctrl-names = "default";
|
|
hdmi-phandle = <&hdmi_tx>;
|
|
};
|
|
|
|
&cvbs_vdac_port {
|
|
cvbs_vdac_out: endpoint {
|
|
remote-endpoint = <&cvbs_connector_in>;
|
|
};
|
|
};
|
|
|
|
ðmac {
|
|
status = "okay";
|
|
};
|
|
|
|
&internal_phy {
|
|
pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
&ir {
|
|
status = "okay";
|
|
pinctrl-0 = <&remote_input_ao_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
&hdmi_tx {
|
|
status = "okay";
|
|
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
&hdmi_tx_tmds_port {
|
|
hdmi_tx_tmds_out: endpoint {
|
|
remote-endpoint = <&hdmi_connector_in>;
|
|
};
|
|
};
|
|
|
|
&gpio_ao {
|
|
gpio-line-names = "UART TX",
|
|
"UART RX",
|
|
"7J1 Header Pin31",
|
|
"", "", "", "",
|
|
"IR In",
|
|
"HDMI CEC",
|
|
"5V VCCK Regulator",
|
|
/* GPIO_TEST_N */
|
|
"";
|
|
};
|
|
|
|
&gpio {
|
|
gpio-line-names = /* Bank GPIOZ */
|
|
"", "", "", "", "", "", "",
|
|
"", "", "", "", "", "", "",
|
|
"Eth Link LED", "Eth Activity LED",
|
|
/* Bank GPIOH */
|
|
"HDMI HPD", "HDMI SDA", "HDMI SCL",
|
|
"", "7J1 Header Pin13",
|
|
"7J1 Header Pin15",
|
|
"7J1 Header Pin7",
|
|
"7J1 Header Pin12",
|
|
"7J1 Header Pin16",
|
|
"7J1 Header Pin18",
|
|
/* Bank BOOT */
|
|
"eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3",
|
|
"eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7",
|
|
"eMMC Clk", "eMMC Reset", "eMMC CMD",
|
|
"SPI NOR MOSI", "SPI NOR MISO", "SPI NOR Clk",
|
|
"", "SPI NOR Chip Select",
|
|
/* Bank CARD */
|
|
"", "", "", "", "", "", "",
|
|
/* Bank GPIODV */
|
|
"", "", "", "", "", "", "", "", "", "", "", "",
|
|
"", "", "", "", "", "", "", "", "", "", "", "",
|
|
"7J1 Header Pin27", "7J1 Header Pin28", "",
|
|
"7J1 Header Pin29",
|
|
"VCCK Regulator", "VDDEE Regulator",
|
|
/* Bank GPIOX */
|
|
"7J1 Header Pin22", "7J1 Header Pin26",
|
|
"7J1 Header Pin36", "7J1 Header Pin38",
|
|
"7J1 Header Pin40", "7J1 Header Pin37",
|
|
"7J1 Header Pin33", "7J1 Header Pin35",
|
|
"7J1 Header Pin19", "7J1 Header Pin21",
|
|
"7J1 Header Pin24", "7J1 Header Pin23",
|
|
"7J1 Header Pin8", "7J1 Header Pin10",
|
|
"", "", "7J1 Header Pin32", "", "",
|
|
/* Bank GPIOCLK */
|
|
"", "";
|
|
};
|
|
|
|
&saradc {
|
|
status = "okay";
|
|
vref-supply = <&vddio_boot>;
|
|
};
|
|
|
|
/* eMMC */
|
|
&sd_emmc_c {
|
|
status = "okay";
|
|
pinctrl-0 = <&emmc_pins>;
|
|
pinctrl-1 = <&emmc_clk_gate_pins>;
|
|
pinctrl-names = "default", "clk-gate";
|
|
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
mmc-ddr-1_8v;
|
|
mmc-hs200-1_8v;
|
|
max-frequency = <200000000>;
|
|
disable-wp;
|
|
|
|
mmc-pwrseq = <&emmc_pwrseq>;
|
|
vmmc-supply = <&vcc_3v3>;
|
|
vqmmc-supply = <&vddio_boot>;
|
|
};
|
|
|
|
&spifc {
|
|
status = "okay";
|
|
pinctrl-0 = <&nor_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
w25q32: spi-flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <3000000>;
|
|
};
|
|
};
|
|
|
|
&uart_AO {
|
|
status = "okay";
|
|
pinctrl-0 = <&uart_ao_a_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
&usb {
|
|
status = "okay";
|
|
dr_mode = "host";
|
|
};
|