mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 19:10:13 +00:00
dbd5ca2e46
Synchronise device tree with linux v6.1-rc3. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-By: Tim Harvey <tharvey@gateworks.com> #imx8m{m,n,p}-venice-*
615 lines
14 KiB
Text
615 lines
14 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright 2020 NXP
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/phy/phy-imx8-pcie.h>
|
|
#include <dt-bindings/usb/pd.h>
|
|
#include "imx8mm.dtsi"
|
|
|
|
/ {
|
|
chosen {
|
|
stdout-path = &uart2;
|
|
};
|
|
|
|
memory@40000000 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x40000000 0 0x80000000>;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpio_led>;
|
|
|
|
status {
|
|
label = "status";
|
|
gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
|
|
default-state = "on";
|
|
};
|
|
};
|
|
|
|
pcie0_refclk: pcie0-refclk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <100000000>;
|
|
};
|
|
|
|
reg_pcie0: regulator-pcie {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pcie0_reg>;
|
|
regulator-name = "MPCIE_3V3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
reg_usdhc2_vmmc: regulator-usdhc2 {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
|
|
regulator-name = "VSD_3V3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm1 0 5000000 0>;
|
|
brightness-levels = <0 255>;
|
|
num-interpolated-steps = <255>;
|
|
default-brightness-level = <250>;
|
|
};
|
|
|
|
ir-receiver {
|
|
compatible = "gpio-ir-receiver";
|
|
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ir>;
|
|
linux,autosuspend-period = <125>;
|
|
};
|
|
|
|
audio_codec_bt_sco: audio-codec-bt-sco {
|
|
compatible = "linux,bt-sco";
|
|
#sound-dai-cells = <1>;
|
|
};
|
|
|
|
wm8524: audio-codec {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "wlf,wm8524";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpio_wlf>;
|
|
wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
sound-bt-sco {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,name = "bt-sco-audio";
|
|
simple-audio-card,format = "dsp_a";
|
|
simple-audio-card,bitclock-inversion;
|
|
simple-audio-card,frame-master = <&btcpu>;
|
|
simple-audio-card,bitclock-master = <&btcpu>;
|
|
|
|
btcpu: simple-audio-card,cpu {
|
|
sound-dai = <&sai2>;
|
|
dai-tdm-slot-num = <2>;
|
|
dai-tdm-slot-width = <16>;
|
|
};
|
|
|
|
simple-audio-card,codec {
|
|
sound-dai = <&audio_codec_bt_sco 1>;
|
|
};
|
|
};
|
|
|
|
sound-wm8524 {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,name = "wm8524-audio";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,frame-master = <&cpudai>;
|
|
simple-audio-card,bitclock-master = <&cpudai>;
|
|
simple-audio-card,widgets =
|
|
"Line", "Left Line Out Jack",
|
|
"Line", "Right Line Out Jack";
|
|
simple-audio-card,routing =
|
|
"Left Line Out Jack", "LINEVOUTL",
|
|
"Right Line Out Jack", "LINEVOUTR";
|
|
|
|
cpudai: simple-audio-card,cpu {
|
|
sound-dai = <&sai3>;
|
|
dai-tdm-slot-num = <2>;
|
|
dai-tdm-slot-width = <32>;
|
|
};
|
|
|
|
simple-audio-card,codec {
|
|
sound-dai = <&wm8524>;
|
|
clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&A53_0 {
|
|
cpu-supply = <&buck2_reg>;
|
|
};
|
|
|
|
&A53_1 {
|
|
cpu-supply = <&buck2_reg>;
|
|
};
|
|
|
|
&A53_2 {
|
|
cpu-supply = <&buck2_reg>;
|
|
};
|
|
|
|
&A53_3 {
|
|
cpu-supply = <&buck2_reg>;
|
|
};
|
|
|
|
&fec1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_fec1>;
|
|
phy-mode = "rgmii-id";
|
|
phy-handle = <ðphy0>;
|
|
fsl,magic-packet;
|
|
status = "okay";
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ethphy0: ethernet-phy@0 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0>;
|
|
reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
|
|
reset-assert-us = <10000>;
|
|
qca,disable-smarteee;
|
|
vddio-supply = <&vddio>;
|
|
|
|
vddio: vddio-regulator {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
status = "okay";
|
|
|
|
pmic@4b {
|
|
compatible = "rohm,bd71847";
|
|
reg = <0x4b>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pmic>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
|
rohm,reset-snvs-powered;
|
|
|
|
#clock-cells = <0>;
|
|
clocks = <&osc_32k 0>;
|
|
clock-output-names = "clk-32k-out";
|
|
|
|
regulators {
|
|
buck1_reg: BUCK1 {
|
|
regulator-name = "buck1";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <1250>;
|
|
};
|
|
|
|
buck2_reg: BUCK2 {
|
|
regulator-name = "buck2";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-ramp-delay = <1250>;
|
|
rohm,dvs-run-voltage = <1000000>;
|
|
rohm,dvs-idle-voltage = <900000>;
|
|
};
|
|
|
|
buck3_reg: BUCK3 {
|
|
// BUCK5 in datasheet
|
|
regulator-name = "buck3";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck4_reg: BUCK4 {
|
|
// BUCK6 in datasheet
|
|
regulator-name = "buck4";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck5_reg: BUCK5 {
|
|
// BUCK7 in datasheet
|
|
regulator-name = "buck5";
|
|
regulator-min-microvolt = <1605000>;
|
|
regulator-max-microvolt = <1995000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
buck6_reg: BUCK6 {
|
|
// BUCK8 in datasheet
|
|
regulator-name = "buck6";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo1_reg: LDO1 {
|
|
regulator-name = "ldo1";
|
|
regulator-min-microvolt = <1600000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo2_reg: LDO2 {
|
|
regulator-name = "ldo2";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo3_reg: LDO3 {
|
|
regulator-name = "ldo3";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo4_reg: LDO4 {
|
|
regulator-name = "ldo4";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo6_reg: LDO6 {
|
|
regulator-name = "ldo6";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
|
status = "okay";
|
|
|
|
ptn5110: tcpc@50 {
|
|
compatible = "nxp,ptn5110";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_typec1>;
|
|
reg = <0x50>;
|
|
interrupt-parent = <&gpio2>;
|
|
interrupts = <11 8>;
|
|
status = "okay";
|
|
|
|
port {
|
|
typec1_dr_sw: endpoint {
|
|
remote-endpoint = <&usb1_drd_sw>;
|
|
};
|
|
};
|
|
|
|
typec1_con: connector {
|
|
compatible = "usb-c-connector";
|
|
label = "USB-C";
|
|
power-role = "dual";
|
|
data-role = "dual";
|
|
try-power-role = "sink";
|
|
source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
|
sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
|
|
PDO_VAR(5000, 20000, 3000)>;
|
|
op-sink-microwatt = <15000000>;
|
|
self-powered;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
|
status = "okay";
|
|
|
|
pca6416: gpio@20 {
|
|
compatible = "ti,tca6416";
|
|
reg = <0x20>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
};
|
|
|
|
&pcie_phy {
|
|
fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
|
|
fsl,tx-deemph-gen1 = <0x2d>;
|
|
fsl,tx-deemph-gen2 = <0xf>;
|
|
clocks = <&pcie0_refclk>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pcie0>;
|
|
reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
|
|
clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
|
|
<&pcie0_refclk>;
|
|
clock-names = "pcie", "pcie_aux", "pcie_bus";
|
|
assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
|
|
<&clk IMX8MM_CLK_PCIE1_CTRL>;
|
|
assigned-clock-rates = <10000000>, <250000000>;
|
|
assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
|
|
<&clk IMX8MM_SYS_PLL2_250M>;
|
|
vpcie-supply = <®_pcie0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sai2 {
|
|
#sound-dai-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sai2>;
|
|
assigned-clocks = <&clk IMX8MM_CLK_SAI2>;
|
|
assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
|
|
assigned-clock-rates = <24576000>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sai3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sai3>;
|
|
assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
|
|
assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
|
|
assigned-clock-rates = <24576000>;
|
|
status = "okay";
|
|
};
|
|
|
|
&snvs_pwrkey {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 { /* console */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg1 {
|
|
dr_mode = "otg";
|
|
hnp-disable;
|
|
srp-disable;
|
|
adp-disable;
|
|
usb-role-switch;
|
|
disable-over-current;
|
|
samsung,picophy-pre-emp-curr-control = <3>;
|
|
samsung,picophy-dc-vol-level-adjust = <7>;
|
|
status = "okay";
|
|
|
|
port {
|
|
usb1_drd_sw: endpoint {
|
|
remote-endpoint = <&typec1_dr_sw>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&usdhc2 {
|
|
assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
|
|
assigned-clock-rates = <200000000>;
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
|
|
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
|
|
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
|
|
cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
|
bus-width = <4>;
|
|
vmmc-supply = <®_usdhc2_vmmc>;
|
|
status = "okay";
|
|
};
|
|
|
|
&wdog1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_wdog>;
|
|
fsl,ext-reset-output;
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_backlight>;
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl_fec1: fec1grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3
|
|
MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
|
|
MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
|
|
MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
|
|
MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
|
|
MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
|
|
MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
|
|
MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
|
|
MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
|
|
MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
|
|
MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
|
|
MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
|
|
MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
|
|
MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
|
|
MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpio_led: gpioledgrp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19
|
|
>;
|
|
};
|
|
|
|
pinctrl_ir: irgrp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x4f
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpio_wlf: gpiowlfgrp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0xd6
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
|
|
MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c2: i2c2grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3
|
|
MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c3: i2c3grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3
|
|
MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
|
|
>;
|
|
};
|
|
|
|
pinctrl_pcie0: pcie0grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B 0x61
|
|
MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x41
|
|
>;
|
|
};
|
|
|
|
pinctrl_pcie0_reg: pcie0reggrp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x41
|
|
>;
|
|
};
|
|
|
|
pinctrl_pmic: pmicirqgrp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141
|
|
>;
|
|
};
|
|
|
|
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
|
|
>;
|
|
};
|
|
|
|
pinctrl_sai2: sai2grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6
|
|
MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6
|
|
MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6
|
|
MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6
|
|
>;
|
|
};
|
|
|
|
pinctrl_sai3: sai3grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
|
|
MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
|
|
MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6
|
|
MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
|
|
>;
|
|
};
|
|
|
|
pinctrl_typec1: typec1grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x159
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart2: uart2grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
|
|
MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2: usdhc2grp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
|
|
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
|
|
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
|
|
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
|
|
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
|
|
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
|
|
MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
|
|
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
|
|
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
|
|
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
|
|
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
|
|
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
|
|
MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
|
|
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
|
|
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
|
|
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
|
|
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
|
|
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
|
|
MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
|
|
>;
|
|
};
|
|
|
|
pinctrl_wdog: wdoggrp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x166
|
|
>;
|
|
};
|
|
|
|
pinctrl_backlight: backlightgrp {
|
|
fsl,pins = <
|
|
MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT 0x06
|
|
>;
|
|
};
|
|
};
|