mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 19:10:13 +00:00
ce040932b5
For correct spi bus detection the spi0 alias is needed in the DT. Otherwise this error will ocurr in U-Boot: Invalid bus 0 (err=-19) Failed to initialize SPI flash at 0:0 (error -19) Signed-off-by: Stefan Roese <sr@denx.de> Cc: Dennis Gilmore <dgilmore@redhat.com> Tested-by: Dennis Gilmore <dgilmore@redhat.com>
231 lines
4.8 KiB
Text
231 lines
4.8 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Device Tree file for Marvell Armada XP development board
|
|
* (DB-MV784MP-GP)
|
|
*
|
|
* Copyright (C) 2013-2014 Marvell
|
|
*
|
|
* Lior Amsalem <alior@marvell.com>
|
|
* Gregory CLEMENT <gregory.clement@free-electrons.com>
|
|
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
|
*
|
|
* Note: this Device Tree assumes that the bootloader has remapped the
|
|
* internal registers to 0xf1000000 (instead of the default
|
|
* 0xd0000000). The 0xf1000000 is the default used by the recent,
|
|
* DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
|
|
* boards were delivered with an older version of the bootloader that
|
|
* left internal registers mapped at 0xd0000000. If you are in this
|
|
* situation, you should either update your bootloader (preferred
|
|
* solution) or the below Device Tree should be adjusted.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include "armada-xp-mv78460.dtsi"
|
|
|
|
/ {
|
|
model = "Marvell Armada XP Development Board DB-MV784MP-GP";
|
|
compatible = "marvell,axp-gp", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
aliases {
|
|
spi0 = &spi0;
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
/*
|
|
* 8 GB of plug-in RAM modules by default.The amount
|
|
* of memory available can be changed by the
|
|
* bootloader according the size of the module
|
|
* actually plugged. However, memory between
|
|
* 0xF0000000 to 0xFFFFFFFF cannot be used, as it is
|
|
* the address range used for I/O (internal registers,
|
|
* MBus windows).
|
|
*/
|
|
reg = <0x00000000 0x00000000 0x00000000 0xf0000000>,
|
|
<0x00000001 0x00000000 0x00000001 0x00000000>;
|
|
};
|
|
|
|
cpus {
|
|
pm_pic {
|
|
ctrl-gpios = <&gpio0 16 GPIO_ACTIVE_LOW>,
|
|
<&gpio0 17 GPIO_ACTIVE_LOW>,
|
|
<&gpio0 18 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
soc {
|
|
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
|
|
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
|
|
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
|
|
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
|
|
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
|
|
MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
|
|
|
|
devbus-bootcs {
|
|
status = "okay";
|
|
|
|
/* Device Bus parameters are required */
|
|
|
|
/* Read parameters */
|
|
devbus,bus-width = <16>;
|
|
devbus,turn-off-ps = <60000>;
|
|
devbus,badr-skew-ps = <0>;
|
|
devbus,acc-first-ps = <124000>;
|
|
devbus,acc-next-ps = <248000>;
|
|
devbus,rd-setup-ps = <0>;
|
|
devbus,rd-hold-ps = <0>;
|
|
|
|
/* Write parameters */
|
|
devbus,sync-enable = <0>;
|
|
devbus,wr-high-ps = <60000>;
|
|
devbus,wr-low-ps = <60000>;
|
|
devbus,ale-wr-ps = <60000>;
|
|
|
|
/* NOR 16 MiB */
|
|
nor@0 {
|
|
compatible = "cfi-flash";
|
|
reg = <0 0x1000000>;
|
|
bank-width = <2>;
|
|
};
|
|
};
|
|
|
|
internal-regs {
|
|
serial@12000 {
|
|
status = "okay";
|
|
};
|
|
serial@12100 {
|
|
status = "okay";
|
|
};
|
|
serial@12200 {
|
|
status = "okay";
|
|
};
|
|
serial@12300 {
|
|
status = "okay";
|
|
};
|
|
pinctrl {
|
|
pinctrl-0 = <&pic_pins>;
|
|
pinctrl-names = "default";
|
|
pic_pins: pic-pins-0 {
|
|
marvell,pins = "mpp16", "mpp17",
|
|
"mpp18";
|
|
marvell,function = "gpio";
|
|
};
|
|
};
|
|
sata@a0000 {
|
|
nr-ports = <2>;
|
|
status = "okay";
|
|
};
|
|
|
|
ethernet@70000 {
|
|
status = "okay";
|
|
phy = <&phy0>;
|
|
phy-mode = "qsgmii";
|
|
buffer-manager = <&bm>;
|
|
bm,pool-long = <0>;
|
|
};
|
|
ethernet@74000 {
|
|
status = "okay";
|
|
phy = <&phy1>;
|
|
phy-mode = "qsgmii";
|
|
buffer-manager = <&bm>;
|
|
bm,pool-long = <1>;
|
|
};
|
|
ethernet@30000 {
|
|
status = "okay";
|
|
phy = <&phy2>;
|
|
phy-mode = "qsgmii";
|
|
buffer-manager = <&bm>;
|
|
bm,pool-long = <2>;
|
|
};
|
|
ethernet@34000 {
|
|
status = "okay";
|
|
phy = <&phy3>;
|
|
phy-mode = "qsgmii";
|
|
buffer-manager = <&bm>;
|
|
bm,pool-long = <3>;
|
|
};
|
|
|
|
/* Front-side USB slot */
|
|
usb@50000 {
|
|
status = "okay";
|
|
};
|
|
|
|
/* Back-side USB slot */
|
|
usb@51000 {
|
|
status = "okay";
|
|
};
|
|
|
|
bm@c0000 {
|
|
status = "okay";
|
|
};
|
|
|
|
nand@d0000 {
|
|
status = "okay";
|
|
label = "pxa3xx_nand-0";
|
|
num-cs = <1>;
|
|
marvell,nand-keep-config;
|
|
nand-on-flash-bbt;
|
|
};
|
|
};
|
|
|
|
bm-bppi {
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
|
|
&pciec {
|
|
status = "okay";
|
|
|
|
/*
|
|
* The 3 slots are physically present as
|
|
* standard PCIe slots on the board.
|
|
*/
|
|
pcie@1,0 {
|
|
/* Port 0, Lane 0 */
|
|
status = "okay";
|
|
};
|
|
pcie@9,0 {
|
|
/* Port 2, Lane 0 */
|
|
status = "okay";
|
|
};
|
|
pcie@a,0 {
|
|
/* Port 3, Lane 0 */
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
phy0: ethernet-phy@0 {
|
|
reg = <16>;
|
|
};
|
|
|
|
phy1: ethernet-phy@1 {
|
|
reg = <17>;
|
|
};
|
|
|
|
phy2: ethernet-phy@2 {
|
|
reg = <18>;
|
|
};
|
|
|
|
phy3: ethernet-phy@3 {
|
|
reg = <19>;
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
status = "okay";
|
|
|
|
spi-flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "n25q128a13", "jedec,spi-nor";
|
|
reg = <0>; /* Chip select 0 */
|
|
spi-max-frequency = <108000000>;
|
|
};
|
|
};
|