Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-03 01:50:25 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/ddr/fsl/options.c
Tom Rini 6e7df1d151 global: Finish CONFIG -> CFG migration 
At this point, the remaining places where we have a symbol that is
defined as CONFIG_... are in fairly odd locations. While as much dead
code has been removed as possible, some of these locations are simply
less obvious at first. In other cases, this code is used, but was
defined in such a way as to have been missed by earlier checks.  Perform
a rename of all such remaining symbols to be CFG_... rather than
CONFIG_...

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2023-01-20 12:27:24 -05:00

1432 lines
33 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2008, 2010-2016 Freescale Semiconductor, Inc.
* Copyright 2017-2018 NXP Semiconductor
*/
#include <common.h>
#include <env.h>
#include <hwconfig.h>
#include <fsl_ddr_sdram.h>
#include <log.h>
#include <fsl_ddr.h>
#if defined(CONFIG_FSL_LSCH2) || defined(CONFIG_FSL_LSCH3) || \
defined(CONFIG_ARM)
#include <asm/arch/clock.h>
#endif
/*
* Use our own stack based buffer before relocation to allow accessing longer
* hwconfig strings that might be in the environment before we've relocated.
* This is pretty fragile on both the use of stack and if the buffer is big
* enough. However we will get a warning from env_get_f() for the latter.
*/
/* Board-specific functions defined in each board's ddr.c */
void __weak fsl_ddr_board_options(memctl_options_t *popts,
dimm_params_t *pdimm,
unsigned int ctrl_num)
{
return;
}
struct dynamic_odt {
unsigned int odt_rd_cfg;
unsigned int odt_wr_cfg;
unsigned int odt_rtt_norm;
unsigned int odt_rtt_wr;
};
#ifdef CONFIG_SYS_FSL_DDR4
/* Quad rank is not verified yet due availability.
* Replacing 20 OHM with 34 OHM since DDR4 doesn't have 20 OHM option
*/
static __maybe_unused const struct dynamic_odt single_Q[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_CS_AND_OTHER_DIMM,
DDR4_RTT_34_OHM, /* unverified */
DDR4_RTT_120_OHM
},
{ /* cs1 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_NEVER,
DDR4_RTT_OFF,
DDR4_RTT_120_OHM
},
{ /* cs2 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_CS_AND_OTHER_DIMM,
DDR4_RTT_34_OHM,
DDR4_RTT_120_OHM
},
{ /* cs3 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_NEVER, /* tied high */
DDR4_RTT_OFF,
DDR4_RTT_120_OHM
}
};
static __maybe_unused const struct dynamic_odt single_D[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_ALL,
DDR4_RTT_40_OHM,
DDR4_RTT_OFF
},
{ /* cs1 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_NEVER,
DDR4_RTT_OFF,
DDR4_RTT_OFF
},
{0, 0, 0, 0},
{0, 0, 0, 0}
};
static __maybe_unused const struct dynamic_odt single_S[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_ALL,
DDR4_RTT_40_OHM,
DDR4_RTT_OFF
},
{0, 0, 0, 0},
{0, 0, 0, 0},
{0, 0, 0, 0},
};
static __maybe_unused const struct dynamic_odt dual_DD[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_SAME_DIMM,
DDR4_RTT_120_OHM,
DDR4_RTT_OFF
},
{ /* cs1 */
FSL_DDR_ODT_OTHER_DIMM,
FSL_DDR_ODT_OTHER_DIMM,
DDR4_RTT_34_OHM,
DDR4_RTT_OFF
},
{ /* cs2 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_SAME_DIMM,
DDR4_RTT_120_OHM,
DDR4_RTT_OFF
},
{ /* cs3 */
FSL_DDR_ODT_OTHER_DIMM,
FSL_DDR_ODT_OTHER_DIMM,
DDR4_RTT_34_OHM,
DDR4_RTT_OFF
}
};
static __maybe_unused const struct dynamic_odt dual_DS[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_SAME_DIMM,
DDR4_RTT_120_OHM,
DDR4_RTT_OFF
},
{ /* cs1 */
FSL_DDR_ODT_OTHER_DIMM,
FSL_DDR_ODT_OTHER_DIMM,
DDR4_RTT_34_OHM,
DDR4_RTT_OFF
},
{ /* cs2 */
FSL_DDR_ODT_OTHER_DIMM,
FSL_DDR_ODT_ALL,
DDR4_RTT_34_OHM,
DDR4_RTT_120_OHM
},
{0, 0, 0, 0}
};
static __maybe_unused const struct dynamic_odt dual_SD[4] = {
{ /* cs0 */
FSL_DDR_ODT_OTHER_DIMM,
FSL_DDR_ODT_ALL,
DDR4_RTT_34_OHM,
DDR4_RTT_120_OHM
},
{0, 0, 0, 0},
{ /* cs2 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_SAME_DIMM,
DDR4_RTT_120_OHM,
DDR4_RTT_OFF
},
{ /* cs3 */
FSL_DDR_ODT_OTHER_DIMM,
FSL_DDR_ODT_OTHER_DIMM,
DDR4_RTT_34_OHM,
DDR4_RTT_OFF
}
};
static __maybe_unused const struct dynamic_odt dual_SS[4] = {
{ /* cs0 */
FSL_DDR_ODT_OTHER_DIMM,
FSL_DDR_ODT_ALL,
DDR4_RTT_34_OHM,
DDR4_RTT_120_OHM
},
{0, 0, 0, 0},
{ /* cs2 */
FSL_DDR_ODT_OTHER_DIMM,
FSL_DDR_ODT_ALL,
DDR4_RTT_34_OHM,
DDR4_RTT_120_OHM
},
{0, 0, 0, 0}
};
static __maybe_unused const struct dynamic_odt dual_D0[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_SAME_DIMM,
DDR4_RTT_40_OHM,
DDR4_RTT_OFF
},
{ /* cs1 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_NEVER,
DDR4_RTT_OFF,
DDR4_RTT_OFF
},
{0, 0, 0, 0},
{0, 0, 0, 0}
};
static __maybe_unused const struct dynamic_odt dual_0D[4] = {
{0, 0, 0, 0},
{0, 0, 0, 0},
{ /* cs2 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_SAME_DIMM,
DDR4_RTT_40_OHM,
DDR4_RTT_OFF
},
{ /* cs3 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_NEVER,
DDR4_RTT_OFF,
DDR4_RTT_OFF
}
};
static __maybe_unused const struct dynamic_odt dual_S0[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_CS,
DDR4_RTT_40_OHM,
DDR4_RTT_OFF
},
{0, 0, 0, 0},
{0, 0, 0, 0},
{0, 0, 0, 0}
};
static __maybe_unused const struct dynamic_odt dual_0S[4] = {
{0, 0, 0, 0},
{0, 0, 0, 0},
{ /* cs2 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_CS,
DDR4_RTT_40_OHM,
DDR4_RTT_OFF
},
{0, 0, 0, 0}
};
static __maybe_unused const struct dynamic_odt odt_unknown[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_CS,
DDR4_RTT_120_OHM,
DDR4_RTT_OFF
},
{ /* cs1 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_CS,
DDR4_RTT_120_OHM,
DDR4_RTT_OFF
},
{ /* cs2 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_CS,
DDR4_RTT_120_OHM,
DDR4_RTT_OFF
},
{ /* cs3 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_CS,
DDR4_RTT_120_OHM,
DDR4_RTT_OFF
}
};
#elif defined(CONFIG_SYS_FSL_DDR3)
static __maybe_unused const struct dynamic_odt single_Q[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_CS_AND_OTHER_DIMM,
DDR3_RTT_20_OHM,
DDR3_RTT_120_OHM
},
{ /* cs1 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_NEVER, /* tied high */
DDR3_RTT_OFF,
DDR3_RTT_120_OHM
},
{ /* cs2 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_CS_AND_OTHER_DIMM,
DDR3_RTT_20_OHM,
DDR3_RTT_120_OHM
},
{ /* cs3 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_NEVER, /* tied high */
DDR3_RTT_OFF,
DDR3_RTT_120_OHM
}
};
static __maybe_unused const struct dynamic_odt single_D[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_ALL,
DDR3_RTT_40_OHM,
DDR3_RTT_OFF
},
{ /* cs1 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_NEVER,
DDR3_RTT_OFF,
DDR3_RTT_OFF
},
{0, 0, 0, 0},
{0, 0, 0, 0}
};
static __maybe_unused const struct dynamic_odt single_S[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_ALL,
DDR3_RTT_40_OHM,
DDR3_RTT_OFF
},
{0, 0, 0, 0},
{0, 0, 0, 0},
{0, 0, 0, 0},
};
static __maybe_unused const struct dynamic_odt dual_DD[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_SAME_DIMM,
DDR3_RTT_120_OHM,
DDR3_RTT_OFF
},
{ /* cs1 */
FSL_DDR_ODT_OTHER_DIMM,
FSL_DDR_ODT_OTHER_DIMM,
DDR3_RTT_30_OHM,
DDR3_RTT_OFF
},
{ /* cs2 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_SAME_DIMM,
DDR3_RTT_120_OHM,
DDR3_RTT_OFF
},
{ /* cs3 */
FSL_DDR_ODT_OTHER_DIMM,
FSL_DDR_ODT_OTHER_DIMM,
DDR3_RTT_30_OHM,
DDR3_RTT_OFF
}
};
static __maybe_unused const struct dynamic_odt dual_DS[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_SAME_DIMM,
DDR3_RTT_120_OHM,
DDR3_RTT_OFF
},
{ /* cs1 */
FSL_DDR_ODT_OTHER_DIMM,
FSL_DDR_ODT_OTHER_DIMM,
DDR3_RTT_30_OHM,
DDR3_RTT_OFF
},
{ /* cs2 */
FSL_DDR_ODT_OTHER_DIMM,
FSL_DDR_ODT_ALL,
DDR3_RTT_20_OHM,
DDR3_RTT_120_OHM
},
{0, 0, 0, 0}
};
static __maybe_unused const struct dynamic_odt dual_SD[4] = {
{ /* cs0 */
FSL_DDR_ODT_OTHER_DIMM,
FSL_DDR_ODT_ALL,
DDR3_RTT_20_OHM,
DDR3_RTT_120_OHM
},
{0, 0, 0, 0},
{ /* cs2 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_SAME_DIMM,
DDR3_RTT_120_OHM,
DDR3_RTT_OFF
},
{ /* cs3 */
FSL_DDR_ODT_OTHER_DIMM,
FSL_DDR_ODT_OTHER_DIMM,
DDR3_RTT_20_OHM,
DDR3_RTT_OFF
}
};
static __maybe_unused const struct dynamic_odt dual_SS[4] = {
{ /* cs0 */
FSL_DDR_ODT_OTHER_DIMM,
FSL_DDR_ODT_ALL,
DDR3_RTT_30_OHM,
DDR3_RTT_120_OHM
},
{0, 0, 0, 0},
{ /* cs2 */
FSL_DDR_ODT_OTHER_DIMM,
FSL_DDR_ODT_ALL,
DDR3_RTT_30_OHM,
DDR3_RTT_120_OHM
},
{0, 0, 0, 0}
};
static __maybe_unused const struct dynamic_odt dual_D0[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_SAME_DIMM,
DDR3_RTT_40_OHM,
DDR3_RTT_OFF
},
{ /* cs1 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_NEVER,
DDR3_RTT_OFF,
DDR3_RTT_OFF
},
{0, 0, 0, 0},
{0, 0, 0, 0}
};
static __maybe_unused const struct dynamic_odt dual_0D[4] = {
{0, 0, 0, 0},
{0, 0, 0, 0},
{ /* cs2 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_SAME_DIMM,
DDR3_RTT_40_OHM,
DDR3_RTT_OFF
},
{ /* cs3 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_NEVER,
DDR3_RTT_OFF,
DDR3_RTT_OFF
}
};
static __maybe_unused const struct dynamic_odt dual_S0[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_CS,
DDR3_RTT_40_OHM,
DDR3_RTT_OFF
},
{0, 0, 0, 0},
{0, 0, 0, 0},
{0, 0, 0, 0}
};
static __maybe_unused const struct dynamic_odt dual_0S[4] = {
{0, 0, 0, 0},
{0, 0, 0, 0},
{ /* cs2 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_CS,
DDR3_RTT_40_OHM,
DDR3_RTT_OFF
},
{0, 0, 0, 0}
};
static __maybe_unused const struct dynamic_odt odt_unknown[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_CS,
DDR3_RTT_120_OHM,
DDR3_RTT_OFF
},
{ /* cs1 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_CS,
DDR3_RTT_120_OHM,
DDR3_RTT_OFF
},
{ /* cs2 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_CS,
DDR3_RTT_120_OHM,
DDR3_RTT_OFF
},
{ /* cs3 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_CS,
DDR3_RTT_120_OHM,
DDR3_RTT_OFF
}
};
#else /* CONFIG_SYS_FSL_DDR3 */
static __maybe_unused const struct dynamic_odt single_Q[4] = {
{0, 0, 0, 0},
{0, 0, 0, 0},
{0, 0, 0, 0},
{0, 0, 0, 0}
};
static __maybe_unused const struct dynamic_odt single_D[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_ALL,
DDR2_RTT_150_OHM,
DDR2_RTT_OFF
},
{ /* cs1 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_NEVER,
DDR2_RTT_OFF,
DDR2_RTT_OFF
},
{0, 0, 0, 0},
{0, 0, 0, 0}
};
static __maybe_unused const struct dynamic_odt single_S[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_ALL,
DDR2_RTT_150_OHM,
DDR2_RTT_OFF
},
{0, 0, 0, 0},
{0, 0, 0, 0},
{0, 0, 0, 0},
};
static __maybe_unused const struct dynamic_odt dual_DD[4] = {
{ /* cs0 */
FSL_DDR_ODT_OTHER_DIMM,
FSL_DDR_ODT_OTHER_DIMM,
DDR2_RTT_75_OHM,
DDR2_RTT_OFF
},
{ /* cs1 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_NEVER,
DDR2_RTT_OFF,
DDR2_RTT_OFF
},
{ /* cs2 */
FSL_DDR_ODT_OTHER_DIMM,
FSL_DDR_ODT_OTHER_DIMM,
DDR2_RTT_75_OHM,
DDR2_RTT_OFF
},
{ /* cs3 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_NEVER,
DDR2_RTT_OFF,
DDR2_RTT_OFF
}
};
static __maybe_unused const struct dynamic_odt dual_DS[4] = {
{ /* cs0 */
FSL_DDR_ODT_OTHER_DIMM,
FSL_DDR_ODT_OTHER_DIMM,
DDR2_RTT_75_OHM,
DDR2_RTT_OFF
},
{ /* cs1 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_NEVER,
DDR2_RTT_OFF,
DDR2_RTT_OFF
},
{ /* cs2 */
FSL_DDR_ODT_OTHER_DIMM,
FSL_DDR_ODT_OTHER_DIMM,
DDR2_RTT_75_OHM,
DDR2_RTT_OFF
},
{0, 0, 0, 0}
};
static __maybe_unused const struct dynamic_odt dual_SD[4] = {
{ /* cs0 */
FSL_DDR_ODT_OTHER_DIMM,
FSL_DDR_ODT_OTHER_DIMM,
DDR2_RTT_75_OHM,
DDR2_RTT_OFF
},
{0, 0, 0, 0},
{ /* cs2 */
FSL_DDR_ODT_OTHER_DIMM,
FSL_DDR_ODT_OTHER_DIMM,
DDR2_RTT_75_OHM,
DDR2_RTT_OFF
},
{ /* cs3 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_NEVER,
DDR2_RTT_OFF,
DDR2_RTT_OFF
}
};
static __maybe_unused const struct dynamic_odt dual_SS[4] = {
{ /* cs0 */
FSL_DDR_ODT_OTHER_DIMM,
FSL_DDR_ODT_OTHER_DIMM,
DDR2_RTT_75_OHM,
DDR2_RTT_OFF
},
{0, 0, 0, 0},
{ /* cs2 */
FSL_DDR_ODT_OTHER_DIMM,
FSL_DDR_ODT_OTHER_DIMM,
DDR2_RTT_75_OHM,
DDR2_RTT_OFF
},
{0, 0, 0, 0}
};
static __maybe_unused const struct dynamic_odt dual_D0[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_ALL,
DDR2_RTT_150_OHM,
DDR2_RTT_OFF
},
{ /* cs1 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_NEVER,
DDR2_RTT_OFF,
DDR2_RTT_OFF
},
{0, 0, 0, 0},
{0, 0, 0, 0}
};
static __maybe_unused const struct dynamic_odt dual_0D[4] = {
{0, 0, 0, 0},
{0, 0, 0, 0},
{ /* cs2 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_ALL,
DDR2_RTT_150_OHM,
DDR2_RTT_OFF
},
{ /* cs3 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_NEVER,
DDR2_RTT_OFF,
DDR2_RTT_OFF
}
};
static __maybe_unused const struct dynamic_odt dual_S0[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_CS,
DDR2_RTT_150_OHM,
DDR2_RTT_OFF
},
{0, 0, 0, 0},
{0, 0, 0, 0},
{0, 0, 0, 0}
};
static __maybe_unused const struct dynamic_odt dual_0S[4] = {
{0, 0, 0, 0},
{0, 0, 0, 0},
{ /* cs2 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_CS,
DDR2_RTT_150_OHM,
DDR2_RTT_OFF
},
{0, 0, 0, 0}
};
static __maybe_unused const struct dynamic_odt odt_unknown[4] = {
{ /* cs0 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_CS,
DDR2_RTT_75_OHM,
DDR2_RTT_OFF
},
{ /* cs1 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_NEVER,
DDR2_RTT_OFF,
DDR2_RTT_OFF
},
{ /* cs2 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_CS,
DDR2_RTT_75_OHM,
DDR2_RTT_OFF
},
{ /* cs3 */
FSL_DDR_ODT_NEVER,
FSL_DDR_ODT_NEVER,
DDR2_RTT_OFF,
DDR2_RTT_OFF
}
};
#endif
/*
* Automatically seleect bank interleaving mode based on DIMMs
* in this order: cs0_cs1_cs2_cs3, cs0_cs1, null.
* This function only deal with one or two slots per controller.
*/
static inline unsigned int auto_bank_intlv(dimm_params_t *pdimm)
{
#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
if (pdimm[0].n_ranks == 4)
return FSL_DDR_CS0_CS1_CS2_CS3;
else if (pdimm[0].n_ranks == 2)
return FSL_DDR_CS0_CS1;
#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
if (pdimm[0].n_ranks == 4)
return FSL_DDR_CS0_CS1_CS2_CS3;
#endif
if (pdimm[0].n_ranks == 2) {
if (pdimm[1].n_ranks == 2)
return FSL_DDR_CS0_CS1_CS2_CS3;
else
return FSL_DDR_CS0_CS1;
}
#endif
return 0;
}
unsigned int populate_memctl_options(const common_timing_params_t *common_dimm,
memctl_options_t *popts,
dimm_params_t *pdimm,
unsigned int ctrl_num)
{
unsigned int i;
char buf[HWCONFIG_BUFFER_SIZE];
#if defined(CONFIG_SYS_FSL_DDR3) || \
defined(CONFIG_SYS_FSL_DDR2) || \
defined(CONFIG_SYS_FSL_DDR4)
const struct dynamic_odt *pdodt = odt_unknown;
#endif
#if (CFG_FSL_SDRAM_TYPE != SDRAM_TYPE_DDR4)
ulong ddr_freq;
#endif
/*
* Extract hwconfig from environment since we have not properly setup
* the environment but need it for ddr config params
*/
#if CONFIG_IS_ENABLED(ENV_SUPPORT)
if (env_get_f("hwconfig", buf, sizeof(buf)) < 0)
#endif
buf[0] = '\0';
#if defined(CONFIG_SYS_FSL_DDR3) || \
defined(CONFIG_SYS_FSL_DDR2) || \
defined(CONFIG_SYS_FSL_DDR4)
/* Chip select options. */
#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
switch (pdimm[0].n_ranks) {
case 1:
pdodt = single_S;
break;
case 2:
pdodt = single_D;
break;
case 4:
pdodt = single_Q;
break;
}
#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
switch (pdimm[0].n_ranks) {
#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
case 4:
pdodt = single_Q;
if (pdimm[1].n_ranks)
printf("Error: Quad- and Dual-rank DIMMs cannot be used together\n");
break;
#endif
case 2:
switch (pdimm[1].n_ranks) {
case 2:
pdodt = dual_DD;
break;
case 1:
pdodt = dual_DS;
break;
case 0:
pdodt = dual_D0;
break;
}
break;
case 1:
switch (pdimm[1].n_ranks) {
case 2:
pdodt = dual_SD;
break;
case 1:
pdodt = dual_SS;
break;
case 0:
pdodt = dual_S0;
break;
}
break;
case 0:
switch (pdimm[1].n_ranks) {
case 2:
pdodt = dual_0D;
break;
case 1:
pdodt = dual_0S;
break;
}
break;
}
#endif /* CONFIG_DIMM_SLOTS_PER_CTLR */
#endif /* CONFIG_SYS_FSL_DDR2, 3, 4 */
/* Pick chip-select local options. */
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
#if defined(CONFIG_SYS_FSL_DDR3) || \
defined(CONFIG_SYS_FSL_DDR2) || \
defined(CONFIG_SYS_FSL_DDR4)
popts->cs_local_opts[i].odt_rd_cfg = pdodt[i].odt_rd_cfg;
popts->cs_local_opts[i].odt_wr_cfg = pdodt[i].odt_wr_cfg;
popts->cs_local_opts[i].odt_rtt_norm = pdodt[i].odt_rtt_norm;
popts->cs_local_opts[i].odt_rtt_wr = pdodt[i].odt_rtt_wr;
#else
popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
#endif
popts->cs_local_opts[i].auto_precharge = 0;
}
/* Pick interleaving mode. */
/*
* 0 = no interleaving
* 1 = interleaving between 2 controllers
*/
popts->memctl_interleaving = 0;
/*
* 0 = cacheline
* 1 = page
* 2 = (logical) bank
* 3 = superbank (only if CS interleaving is enabled)
*/
popts->memctl_interleaving_mode = 0;
/*
* 0: cacheline: bit 30 of the 36-bit physical addr selects the memctl
* 1: page: bit to the left of the column bits selects the memctl
* 2: bank: bit to the left of the bank bits selects the memctl
* 3: superbank: bit to the left of the chip select selects the memctl
*
* NOTE: ba_intlv (rank interleaving) is independent of memory
* controller interleaving; it is only within a memory controller.
* Must use superbank interleaving if rank interleaving is used and
* memory controller interleaving is enabled.
*/
/*
* 0 = no
* 0x40 = CS0,CS1
* 0x20 = CS2,CS3
* 0x60 = CS0,CS1 + CS2,CS3
* 0x04 = CS0,CS1,CS2,CS3
*/
popts->ba_intlv_ctl = 0;
/* Memory Organization Parameters */
popts->registered_dimm_en = common_dimm->all_dimms_registered;
/* Operational Mode Paramters */
/* Pick ECC modes */
popts->ecc_mode = 0; /* 0 = disabled, 1 = enabled */
#ifdef CONFIG_DDR_ECC
if (hwconfig_sub_f("fsl_ddr", "ecc", buf)) {
if (hwconfig_subarg_cmp_f("fsl_ddr", "ecc", "on", buf))
popts->ecc_mode = 1;
} else
popts->ecc_mode = 1;
#endif
/* 1 = use memory controler to init data */
popts->ecc_init_using_memctl = popts->ecc_mode ? 1 : 0;
/*
* Choose DQS config
* 0 for DDR1
* 1 for DDR2
*/
#if defined(CONFIG_SYS_FSL_DDR1)
popts->dqs_config = 0;
#elif defined(CONFIG_SYS_FSL_DDR2) || defined(CONFIG_SYS_FSL_DDR3)
popts->dqs_config = 1;
#endif
/* Choose self-refresh during sleep. */
popts->self_refresh_in_sleep = 1;
/* Choose dynamic power management mode. */
popts->dynamic_power = 0;
/*
* check first dimm for primary sdram width
* presuming all dimms are similar
* 0 = 64-bit, 1 = 32-bit, 2 = 16-bit
*/
#if defined(CONFIG_SYS_FSL_DDR1) || defined(CONFIG_SYS_FSL_DDR2)
if (pdimm[0].n_ranks != 0) {
if ((pdimm[0].data_width >= 64) && \
(pdimm[0].data_width <= 72))
popts->data_bus_width = 0;
else if ((pdimm[0].data_width >= 32) && \
(pdimm[0].data_width <= 40))
popts->data_bus_width = 1;
else {
panic("Error: data width %u is invalid!\n",
pdimm[0].data_width);
}
}
#else
if (pdimm[0].n_ranks != 0) {
if (pdimm[0].primary_sdram_width == 64)
popts->data_bus_width = 0;
else if (pdimm[0].primary_sdram_width == 32)
popts->data_bus_width = 1;
else if (pdimm[0].primary_sdram_width == 16)
popts->data_bus_width = 2;
else {
panic("Error: primary sdram width %u is invalid!\n",
pdimm[0].primary_sdram_width);
}
}
#endif
popts->x4_en = (pdimm[0].device_width == 4) ? 1 : 0;
/* Choose burst length. */
#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4)
#if defined(CONFIG_E500MC)
popts->otf_burst_chop_en = 0; /* on-the-fly burst chop disable */
popts->burst_length = DDR_BL8; /* Fixed 8-beat burst len */
#else
if ((popts->data_bus_width == 1) || (popts->data_bus_width == 2)) {
/* 32-bit or 16-bit bus */
popts->otf_burst_chop_en = 0;
popts->burst_length = DDR_BL8;
} else {
popts->otf_burst_chop_en = 1; /* on-the-fly burst chop */
popts->burst_length = DDR_OTF; /* on-the-fly BC4 and BL8 */
}
#endif
#else
popts->burst_length = DDR_BL4; /* has to be 4 for DDR2 */
#endif
/* Choose ddr controller address mirror mode */
#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4)
for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
if (pdimm[i].n_ranks) {
popts->mirrored_dimm = pdimm[i].mirrored_dimm;
break;
}
}
#endif
/* Global Timing Parameters. */
debug("mclk_ps = %u ps\n", get_memory_clk_period_ps(ctrl_num));
/* Pick a caslat override. */
popts->cas_latency_override = 0;
popts->cas_latency_override_value = 3;
if (popts->cas_latency_override) {
debug("using caslat override value = %u\n",
popts->cas_latency_override_value);
}
/* Decide whether to use the computed derated latency */
popts->use_derated_caslat = 0;
/* Choose an additive latency. */
popts->additive_latency_override = 0;
popts->additive_latency_override_value = 3;
if (popts->additive_latency_override) {
debug("using additive latency override value = %u\n",
popts->additive_latency_override_value);
}
/*
* 2T_EN setting
*
* Factors to consider for 2T_EN:
* - number of DIMMs installed
* - number of components, number of active ranks
* - how much time you want to spend playing around
*/
popts->twot_en = 0;
popts->threet_en = 0;
/* for RDIMM and DDR4 UDIMM/discrete memory, address parity enable */
if (popts->registered_dimm_en)
popts->ap_en = 1; /* 0 = disable, 1 = enable */
else
popts->ap_en = 0; /* disabled for DDR4 UDIMM/discrete default */
if (hwconfig_sub_f("fsl_ddr", "parity", buf)) {
if (hwconfig_subarg_cmp_f("fsl_ddr", "parity", "on", buf)) {
if (popts->registered_dimm_en ||
(CFG_FSL_SDRAM_TYPE == SDRAM_TYPE_DDR4))
popts->ap_en = 1;
}
}
/*
* BSTTOPRE precharge interval
*
* Set this to 0 for global auto precharge
* The value of 0x100 has been used for DDR1, DDR2, DDR3.
* It is not wrong. Any value should be OK. The performance depends on
* applications. There is no one good value for all. One way to set
* is to use 1/4 of refint value.
*/
popts->bstopre = picos_to_mclk(ctrl_num, common_dimm->refresh_rate_ps)
>> 2;
/*
* Window for four activates -- tFAW
*
* FIXME: UM: applies only to DDR2/DDR3 with eight logical banks only
* FIXME: varies depending upon number of column addresses or data
* FIXME: width, was considering looking at pdimm->primary_sdram_width
*/
#if defined(CONFIG_SYS_FSL_DDR1)
popts->tfaw_window_four_activates_ps = mclk_to_picos(ctrl_num, 1);
#elif defined(CONFIG_SYS_FSL_DDR2)
/*
* x4/x8; some datasheets have 35000
* x16 wide columns only? Use 50000?
*/
popts->tfaw_window_four_activates_ps = 37500;
#else
popts->tfaw_window_four_activates_ps = pdimm[0].tfaw_ps;
#endif
popts->zq_en = 0;
popts->wrlvl_en = 0;
#if defined(CONFIG_SYS_FSL_DDR3) || defined(CONFIG_SYS_FSL_DDR4)
/*
* due to ddr3 dimm is fly-by topology
* we suggest to enable write leveling to
* meet the tQDSS under different loading.
*/
popts->wrlvl_en = 1;
popts->zq_en = 1;
popts->wrlvl_override = 0;
#endif
/*
* Check interleaving configuration from environment.
* Please refer to doc/README.fsl-ddr for the detail.
*
* If memory controller interleaving is enabled, then the data
* bus widths must be programmed identically for all memory controllers.
*
* Attempt to set all controllers to the same chip select
* interleaving mode. It will do a best effort to get the
* requested ranks interleaved together such that the result
* should be a subset of the requested configuration.
*
* if CONFIG_SYS_FSL_DDR_INTLV_256B is defined, mandatory interleaving
* with 256 Byte is enabled.
*/
#if (CONFIG_SYS_NUM_DDR_CTLRS > 1)
if (!hwconfig_sub_f("fsl_ddr", "ctlr_intlv", buf))
#ifdef CONFIG_SYS_FSL_DDR_INTLV_256B
;
#else
goto done;
#endif
if (pdimm[0].n_ranks == 0) {
printf("There is no rank on CS0 for controller %d.\n", ctrl_num);
popts->memctl_interleaving = 0;
goto done;
}
popts->memctl_interleaving = 1;
#ifdef CONFIG_SYS_FSL_DDR_INTLV_256B
popts->memctl_interleaving_mode = FSL_DDR_256B_INTERLEAVING;
popts->memctl_interleaving = 1;
debug("256 Byte interleaving\n");
#else
/*
* test null first. if CONFIG_HWCONFIG is not defined
* hwconfig_arg_cmp returns non-zero
*/
if (hwconfig_subarg_cmp_f("fsl_ddr", "ctlr_intlv",
"null", buf)) {
popts->memctl_interleaving = 0;
debug("memory controller interleaving disabled.\n");
} else if (hwconfig_subarg_cmp_f("fsl_ddr",
"ctlr_intlv",
"cacheline", buf)) {
popts->memctl_interleaving_mode =
((CONFIG_SYS_NUM_DDR_CTLRS == 3) && ctrl_num == 2) ?
0 : FSL_DDR_CACHE_LINE_INTERLEAVING;
popts->memctl_interleaving =
((CONFIG_SYS_NUM_DDR_CTLRS == 3) && ctrl_num == 2) ?
0 : 1;
} else if (hwconfig_subarg_cmp_f("fsl_ddr",
"ctlr_intlv",
"page", buf)) {
popts->memctl_interleaving_mode =
((CONFIG_SYS_NUM_DDR_CTLRS == 3) && ctrl_num == 2) ?
0 : FSL_DDR_PAGE_INTERLEAVING;
popts->memctl_interleaving =
((CONFIG_SYS_NUM_DDR_CTLRS == 3) && ctrl_num == 2) ?
0 : 1;
} else if (hwconfig_subarg_cmp_f("fsl_ddr",
"ctlr_intlv",
"bank", buf)) {
popts->memctl_interleaving_mode =
((CONFIG_SYS_NUM_DDR_CTLRS == 3) && ctrl_num == 2) ?
0 : FSL_DDR_BANK_INTERLEAVING;
popts->memctl_interleaving =
((CONFIG_SYS_NUM_DDR_CTLRS == 3) && ctrl_num == 2) ?
0 : 1;
} else if (hwconfig_subarg_cmp_f("fsl_ddr",
"ctlr_intlv",
"superbank", buf)) {
popts->memctl_interleaving_mode =
((CONFIG_SYS_NUM_DDR_CTLRS == 3) && ctrl_num == 2) ?
0 : FSL_DDR_SUPERBANK_INTERLEAVING;
popts->memctl_interleaving =
((CONFIG_SYS_NUM_DDR_CTLRS == 3) && ctrl_num == 2) ?
0 : 1;
#if (CONFIG_SYS_NUM_DDR_CTLRS == 3)
} else if (hwconfig_subarg_cmp_f("fsl_ddr",
"ctlr_intlv",
"3way_1KB", buf)) {
popts->memctl_interleaving_mode =
FSL_DDR_3WAY_1KB_INTERLEAVING;
} else if (hwconfig_subarg_cmp_f("fsl_ddr",
"ctlr_intlv",
"3way_4KB", buf)) {
popts->memctl_interleaving_mode =
FSL_DDR_3WAY_4KB_INTERLEAVING;
} else if (hwconfig_subarg_cmp_f("fsl_ddr",
"ctlr_intlv",
"3way_8KB", buf)) {
popts->memctl_interleaving_mode =
FSL_DDR_3WAY_8KB_INTERLEAVING;
#elif (CONFIG_SYS_NUM_DDR_CTLRS == 4)
} else if (hwconfig_subarg_cmp_f("fsl_ddr",
"ctlr_intlv",
"4way_1KB", buf)) {
popts->memctl_interleaving_mode =
FSL_DDR_4WAY_1KB_INTERLEAVING;
} else if (hwconfig_subarg_cmp_f("fsl_ddr",
"ctlr_intlv",
"4way_4KB", buf)) {
popts->memctl_interleaving_mode =
FSL_DDR_4WAY_4KB_INTERLEAVING;
} else if (hwconfig_subarg_cmp_f("fsl_ddr",
"ctlr_intlv",
"4way_8KB", buf)) {
popts->memctl_interleaving_mode =
FSL_DDR_4WAY_8KB_INTERLEAVING;
#endif
} else {
popts->memctl_interleaving = 0;
printf("hwconfig has unrecognized parameter for ctlr_intlv.\n");
}
#endif /* CONFIG_SYS_FSL_DDR_INTLV_256B */
done:
#endif /* CONFIG_SYS_NUM_DDR_CTLRS > 1 */
if ((hwconfig_sub_f("fsl_ddr", "bank_intlv", buf)) &&
(CONFIG_CHIP_SELECTS_PER_CTRL > 1)) {
/* test null first. if CONFIG_HWCONFIG is not defined,
* hwconfig_subarg_cmp_f returns non-zero */
if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
"null", buf))
debug("bank interleaving disabled.\n");
else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
"cs0_cs1", buf))
popts->ba_intlv_ctl = FSL_DDR_CS0_CS1;
else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
"cs2_cs3", buf))
popts->ba_intlv_ctl = FSL_DDR_CS2_CS3;
else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
"cs0_cs1_and_cs2_cs3", buf))
popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_AND_CS2_CS3;
else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
"cs0_cs1_cs2_cs3", buf))
popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_CS2_CS3;
else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
"auto", buf))
popts->ba_intlv_ctl = auto_bank_intlv(pdimm);
else
printf("hwconfig has unrecognized parameter for bank_intlv.\n");
switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
case FSL_DDR_CS0_CS1_CS2_CS3:
#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
if (pdimm[0].n_ranks < 4) {
popts->ba_intlv_ctl = 0;
printf("Not enough bank(chip-select) for "
"CS0+CS1+CS2+CS3 on controller %d, "
"interleaving disabled!\n", ctrl_num);
}
#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
if (pdimm[0].n_ranks == 4)
break;
#endif
if ((pdimm[0].n_ranks < 2) && (pdimm[1].n_ranks < 2)) {
popts->ba_intlv_ctl = 0;
printf("Not enough bank(chip-select) for "
"CS0+CS1+CS2+CS3 on controller %d, "
"interleaving disabled!\n", ctrl_num);
}
if (pdimm[0].capacity != pdimm[1].capacity) {
popts->ba_intlv_ctl = 0;
printf("Not identical DIMM size for "
"CS0+CS1+CS2+CS3 on controller %d, "
"interleaving disabled!\n", ctrl_num);
}
#endif
break;
case FSL_DDR_CS0_CS1:
if (pdimm[0].n_ranks < 2) {
popts->ba_intlv_ctl = 0;
printf("Not enough bank(chip-select) for "
"CS0+CS1 on controller %d, "
"interleaving disabled!\n", ctrl_num);
}
break;
case FSL_DDR_CS2_CS3:
#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
if (pdimm[0].n_ranks < 4) {
popts->ba_intlv_ctl = 0;
printf("Not enough bank(chip-select) for CS2+CS3 "
"on controller %d, interleaving disabled!\n", ctrl_num);
}
#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
if (pdimm[1].n_ranks < 2) {
popts->ba_intlv_ctl = 0;
printf("Not enough bank(chip-select) for CS2+CS3 "
"on controller %d, interleaving disabled!\n", ctrl_num);
}
#endif
break;
case FSL_DDR_CS0_CS1_AND_CS2_CS3:
#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
if (pdimm[0].n_ranks < 4) {
popts->ba_intlv_ctl = 0;
printf("Not enough bank(CS) for CS0+CS1 and "
"CS2+CS3 on controller %d, "
"interleaving disabled!\n", ctrl_num);
}
#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
if ((pdimm[0].n_ranks < 2) || (pdimm[1].n_ranks < 2)) {
popts->ba_intlv_ctl = 0;
printf("Not enough bank(CS) for CS0+CS1 and "
"CS2+CS3 on controller %d, "
"interleaving disabled!\n", ctrl_num);
}
#endif
break;
default:
popts->ba_intlv_ctl = 0;
break;
}
}
if (hwconfig_sub_f("fsl_ddr", "addr_hash", buf)) {
if (hwconfig_subarg_cmp_f("fsl_ddr", "addr_hash", "null", buf))
popts->addr_hash = 0;
else if (hwconfig_subarg_cmp_f("fsl_ddr", "addr_hash",
"true", buf))
popts->addr_hash = 1;
}
if (pdimm[0].n_ranks == 4)
popts->quad_rank_present = 1;
popts->package_3ds = pdimm->package_3ds;
#if (CFG_FSL_SDRAM_TYPE != SDRAM_TYPE_DDR4)
ddr_freq = get_ddr_freq(ctrl_num) / 1000000;
if (popts->registered_dimm_en) {
popts->rcw_override = 1;
popts->rcw_1 = 0x000a5a00;
if (ddr_freq <= 800)
popts->rcw_2 = 0x00000000;
else if (ddr_freq <= 1066)
popts->rcw_2 = 0x00100000;
else if (ddr_freq <= 1333)
popts->rcw_2 = 0x00200000;
else
popts->rcw_2 = 0x00300000;
}
#endif
fsl_ddr_board_options(popts, pdimm, ctrl_num);
return 0;
}
void check_interleaving_options(fsl_ddr_info_t *pinfo)
{
int i, j, k, check_n_ranks, intlv_invalid = 0;
unsigned int check_intlv, check_n_row_addr, check_n_col_addr;
unsigned long long check_rank_density;
struct dimm_params_s *dimm;
int first_ctrl = pinfo->first_ctrl;
int last_ctrl = first_ctrl + pinfo->num_ctrls - 1;
/*
* Check if all controllers are configured for memory
* controller interleaving. Identical dimms are recommended. At least
* the size, row and col address should be checked.
*/
j = 0;
check_n_ranks = pinfo->dimm_params[first_ctrl][0].n_ranks;
check_rank_density = pinfo->dimm_params[first_ctrl][0].rank_density;
check_n_row_addr = pinfo->dimm_params[first_ctrl][0].n_row_addr;
check_n_col_addr = pinfo->dimm_params[first_ctrl][0].n_col_addr;
check_intlv = pinfo->memctl_opts[first_ctrl].memctl_interleaving_mode;
for (i = first_ctrl; i <= last_ctrl; i++) {
dimm = &pinfo->dimm_params[i][0];
if (!pinfo->memctl_opts[i].memctl_interleaving) {
continue;
} else if (((check_rank_density != dimm->rank_density) ||
(check_n_ranks != dimm->n_ranks) ||
(check_n_row_addr != dimm->n_row_addr) ||
(check_n_col_addr != dimm->n_col_addr) ||
(check_intlv !=
pinfo->memctl_opts[i].memctl_interleaving_mode))){
intlv_invalid = 1;
break;
} else {
j++;
}
}
if (intlv_invalid) {
for (i = first_ctrl; i <= last_ctrl; i++)
pinfo->memctl_opts[i].memctl_interleaving = 0;
printf("Not all DIMMs are identical. "
"Memory controller interleaving disabled.\n");
} else {
switch (check_intlv) {
case FSL_DDR_256B_INTERLEAVING:
case FSL_DDR_CACHE_LINE_INTERLEAVING:
case FSL_DDR_PAGE_INTERLEAVING:
case FSL_DDR_BANK_INTERLEAVING:
case FSL_DDR_SUPERBANK_INTERLEAVING:
#if (3 == CONFIG_SYS_NUM_DDR_CTLRS)
k = 2;
#else
k = CONFIG_SYS_NUM_DDR_CTLRS;
#endif
break;
case FSL_DDR_3WAY_1KB_INTERLEAVING:
case FSL_DDR_3WAY_4KB_INTERLEAVING:
case FSL_DDR_3WAY_8KB_INTERLEAVING:
case FSL_DDR_4WAY_1KB_INTERLEAVING:
case FSL_DDR_4WAY_4KB_INTERLEAVING:
case FSL_DDR_4WAY_8KB_INTERLEAVING:
default:
k = CONFIG_SYS_NUM_DDR_CTLRS;
break;
}
debug("%d of %d controllers are interleaving.\n", j, k);
if (j && (j != k)) {
for (i = first_ctrl; i <= last_ctrl; i++)
pinfo->memctl_opts[i].memctl_interleaving = 0;
if ((last_ctrl - first_ctrl) > 1)
puts("Not all controllers have compatible interleaving mode. All disabled.\n");
}
}
debug("Checking interleaving options completed\n");
}
int fsl_use_spd(void)
{
int use_spd = 0;
#ifdef CONFIG_DDR_SPD
char buf[HWCONFIG_BUFFER_SIZE];
/*
* Extract hwconfig from environment since we have not properly setup
* the environment but need it for ddr config params
*/
#if CONFIG_IS_ENABLED(ENV_SUPPORT)
if (env_get_f("hwconfig", buf, sizeof(buf)) < 0)
#endif
buf[0] = '\0';
/* if hwconfig is not enabled, or "sdram" is not defined, use spd */
if (hwconfig_sub_f("fsl_ddr", "sdram", buf)) {
if (hwconfig_subarg_cmp_f("fsl_ddr", "sdram", "spd", buf))
use_spd = 1;
else if (hwconfig_subarg_cmp_f("fsl_ddr", "sdram",
"fixed", buf))
use_spd = 0;
else
use_spd = 1;
} else
use_spd = 1;
#endif
return use_spd;
}
Reference in a new issue View git blame Copy permalink